• Proceedings of the Safety Management and Science Conference
• /
• 2004.11a
• /
• pp.447-451
• /
• 2004

Generally, Fixed Quantity ordering system (Q-system) uses linear model in inventory decrease. This paper focuses on that Fixed Quantity ordering system (Q-system) is based on a continuous review system. To use a continuous review system is because of an inventory decrease ration is not constant. Therefore, this paper introduces a method to select a model which is proper to virtual data under conditions which are inconstant.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.3
• /
• pp.461-465
• /
• 2005

Characteristics of biological $CO_2$ fixation by Chlorella sp. HA-1 were investigated in a semi-continuous and series reactor system using an internally illuminated photobioreactor to overcome shortcomings of physicochemical technologies such as adsorption and membrane separation. High $CO_2$ fixation rate was achieved in the semi-continuous reactor system, in which the dilution ratios of the culture medium were controlled. The average $CO_2$ fixation rate was maintained almost constantly when the dilution ratio increased by 0.1 increment from the initial value of 0.5. The total removal efficiency of $CO_2$ was enhanced by employing a series reactor system. The average $CO_2$ fixation rate increased until 4.013 g $CO_2\;day^{-1}$ in a series operation of four reactors, compared to 0.986 g $CO_2\;day^{-1}$ in a batch operation mode. The total $CO_2$ fixation rate was proportional to the number of reactors used in the series reactor system. In the series reactor system of semi-continuous operation, a large amount of $CO_2$ was removed continuously for 30 days. These results showed that the present reactor systems are efficient and economically feasible for a biological $CO_2$ fixation.

• Environmental Engineering Research
• /
• v.23 no.1
• /
• pp.114-119
• /
• 2018

Yarn dyed wastewater has to be treated prior to disposal into the water bodies due to its high content of harmful organic compounds. In this study, the performance of Chemical Oxygen Demand (COD) removal and kinetic rate constant are investigated via hybrid electrocoagulation-Fenton in a continuous system using wastewater discharged from a yarn dyed industry in Surabaya city. The wastewater was treated in a batch mode using electrocoagulation to reduce Total Suspended Solid, followed by Fenton method in a continuous system to reduce COD level. Various Fe(II) feeding modes, molar ratio of $Fe(II)/H_2O_2$, initial pH of wastewater, and flow rate are used in this study. The results show that COD removal process obeys a pseudo-first order kinetics. At $Fe(II)/H_2O_2$ ratio of 1:10, initial wastewater pH of 3.0, and feed flow rate of 30 mL/min, the COD removal efficiency was observed to be 80%, and the kinetic rate constant is $0.07046min^{-1}$. The chemical cost for the treatment estimated to be IDR 160 per L wastewater, which is cheaper than the previously reported batch system of IDR 256/L.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.45-48
• /
• 1999

Model predictive control algorithm requires a relevant model of the system to be controlled. Unfortunately, the first principle model describing a polymerization reaction system has a large number of parameters to be estimated. Thus there is a need for the identification and control of a polymerization reactor system by using available input-output data. In this work, the polynomial auto-regressive moving average (ARMA) models are employed as the input-output model and combined into the nonlinear model predictive control algorithm based on the successive linearization method. Simulations are conducted to identify the continuous styrene polymerization reactor system. The input variables are the jacket inlet temperature and the feed flow rate whereas the output variables are the monomer conversion and the weight-average molecular weight. The polynomial ARMA models obtained by the system identification are used to control the monomer conversion and the weight-average molecular weight in a continuous styrene polymerization reactor It is demonstrated that the nonlinear model predictive controller based on the polynomial ARMA model tracks the step changes in the setpoint satisfactorily. In conclusion, the polynomial ARMA model is proven effective in controlling the continuous styrene polymerization reactor.

• Membrane Journal
• /
• v.16 no.3
• /
• pp.167-181
• /
• 2006

Continuous Electrodeionization (CEDI) is a hybrid separation process of electrodialysis and ion exchange to produce high purity water under electric field. CEDI system is generally explained with two regimes, ionic removal and electroregeneration. The performance optimization and modification of stack configuration is required for the effective utilization and various applications of a CEDI system. Understanding on various system characterization method and ion transport equation is thus necessary to utilize the CEDI system more effectively. This article provides a general review of continuous electrodeionization, including the basic principles and current stage of technologies of a CEDI system.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.401-405
• /
• 2017

Continuous variable thrusters require precise thrust control to change the position or attitude of the aircraft and to control the pressure inside the combustion chamber. For this purpose, the thrust is adjusted by moving the pintle structure near the nozzle neck inside the combustion chamber by moving the pintle structure forward and backward, and the actuator is used to move the pintle structure. In this paper, we developed a actuator system for continuous variable thruster and load test system to simulate the load under operating conditions. Also, the performance test of the actuator was performed using the developed load test system

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.306-309
• /
• 1993

Digital redesign techniques are to derive a digital controller fred the existing continuous controller and its plant so that the performance of the digitally controlled system is matched as closely as possible to that of the original continuous system at the sampling instants. Recently a new digital redesign technique, was developed to use the generalized sampled-data hold function(GSHF) based on the the grammian matrix. With this new technique the digitally redesigned system showed several good features compared with any existing technique in terms of the state match at the sampling instants, the large sampling period, and the transient reponses. This paper concerns a further improvement of the new digital redesign technique by employing the discrete grammian matrix instead of the continuous grammian matrix in defining GSHF. With this modification, it was observed by simulation that the transient response of the modified digital system shows far better performance than the digital system based on the continuous grammian matrix.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.05a
• /
• pp.1-4
• /
• 2006

A down construction method is frequently used in these days to reduce popular discontent and to assure sufficient working space at early stage in downtown area. There are two main problems in the existing down construction method. One is a confliction between frame works and excavation works, and the other is a cold joint in retaining wall which is unavoidable due to a sequence of concrete placement and induces a water leakage. Therefore, a new method is needed to overcome these problems. The CWS (buried wale Continuous Wall System) method was developed by authors. By replacing RC perimeter beam with embedded steel wale, the steel frame works of substructure can be simplified and the water leakage can be prevented using continuous retaining wall. Consequently, the improved duality and reduction of construction period can be obtained from CWS method.

• Journal of the Korea Institute of Building Construction
• /
• v.6 no.2 s.20
• /
• pp.81-89
• /
• 2006

A down construction method is frequently used in these days to reduce popular discontent and to assure sufficient working space at early stage in downtown area. There are two main problems in the existing down construction method. One is a confliction between frame works and excavation works, and the other is a cold joint in retaining wall which is unavoidable due to a sequence of concrete placement and induces a water leakage. Therefore, a new method is needed to overcome these problems. The CWS (buried wale Continuous Wall System) method was developed by authors. By replacing RC perimeter beam with embedded steel wale, the steel frame works of substructure can be simplified and the water leakage can be prevented using continuous retaining wall. Consequently, the improved qualify and reduction of construction period can be obtained from CWS method.

• Journal of Distribution Science
• /
• v.20 no.10
• /
• pp.105-117
• /
• 2022

Purpose: The digital healthcare business is rapidly growing due to the COVID-19 pandemic, and the medical service platform business based on smartphone apps is globally expanding. This study targeted medical information online to offline (O2O) platform users in the medical service field. It verified the effect relationship revealed in the continuous use intention of the platform with the mediation of platform quality components, namely perceived benefits, flow experience, and use satisfaction. Research design, data and methodology: Based on previous studies, three medical information O2O platform quality components, namely system quality, information quality, and service quality, were defined. And the questionnaire survey was carried out targeting 359 leading medical information O2O platform users in Korea. Results: As a result of the analysis, it was confirmed that system quality and service quality had a positive (+) effect on satisfaction and continuous use intention with the mediation of perceived benefits and flow experience. Meanwhile, information quality had a negative effect (-) on perceived benefits and flow experience and did not affect use satisfaction and continuous use intention. Conclusions: Consequently, it was ascertained that the system quality and service quality affecting user behavior and experience were more significant factors than information quality to medical information O2O platform users from the medical service aspect.