• Journal of The Korean Society of Clinical Toxicology
• /
• v.7 no.2
• /
• pp.150-155
• /
• 2009

Purpose: Extracorporeal elimination of drugs is a critical part of managing poisonings, although the indications and optimal method remain a matter of debate. The aim of this study is to report our clinical experiences with continuous renal replacement therapy (CRRT), as performed by emergency room physicians, as method of extracorporeal drug elimination in patients with poisoning. Methods: This study was a retrospective study of the consecutive patients who underwent CRRT, as performed by an emergency room physician, for acute poisoning. The patient characteristics, the kinds of drugs and the method of extracorporeal elimination were analyzed by reviewing the patients' charts. Results: During eleven months, 26 patients with acute poisoning underwent extracorporeal elimination (2 patients; intermittent hemodialysis, 24 patients; CRRT). The mean time from the decision to performing extracorporeal elimination was $206.0{\pm}36.8$ minutes for intermittent hemodialysis, $62.9{\pm}8.5$ minutes for continuous venoveno-hemodiafiltration (CVVHDF) and $56.6{\pm}6.8$ minutes for charcoal hemoperfusion. For the patients with CRRT, CVVHDF was conducted in 10 patients (3 patients; valproic acid, 2 patients; Lithium, 1 patient; salicylates, 1 patient; methanol) and charcoal hemoperfusion by using CRRT was done in 14 patients (13 patients; paraquat, 1 patient; dapsone). For the 12 patients who required hemodialysis due to severe poisoning, 7 patients underwent CRRT because of their unstable vital signs. Conclusion: CRRT was an effective method of extracorporeal drug elimination in patients with acute poisoning, and especially for the cases with unstable vital sign and for those patients who required an early start of extracorporeal elimination according to the characteristics of the drug. (ED note: the writing of the abstract was not clear. Check it carefully.)

• Journal of Climate Change Research
• /
• v.6 no.3
• /
• pp.175-184
• /
• 2015

In this study GC and PAS were used to calculate $N_2O$ concentration of exhaust gas from Wood Chip combustion system. Fuel supplied to the incinerator was collected and analyzed and then the analysis result was used to calculate $N_2O$ emissions. Tier 3 and Tier 4 Method were used to calculate the $N_2O$ emissions. Plant's Specific emission factor of $N_2O$ by Tier 3 Method was 0.35 kg/TJ, while default emission factor of Wood?Wood Waste proposed by 2006 IPCC G/L was 4 kg/TJ. So the $N_2O$ emission factor of this study was 3.65 kg/TJ lower compared to the IPCC G/L. The total emissions calculated by Plant's specific emission factor was 4.22 kg during the measuring period, but by Tier 4 Method it was 7.88 kg. This difference in emissions was caused by the difference of continuous measuring and intermittent sampling. It would be necessary to apply continuous measuring to calculate emissions of $Non-CO_2$ gas whose the density distribution is relatively high. However currently, according to the target management guideline of greenhouse gas and energy, the continuous measuring method to calculate greenhouse gas emission is applied only to $CO_2$. Therefore for reliable greenhouse gas emission calculation it would be necessary to apply continuous measuring to calculate $Non-CO_2$ gas emission.

• Journal of the Korean Society of Costume
• /
• v.16
• /
• pp.173-185
• /
• 1991

We measured change of peripheral skin temperature and mean skin temperature when the upper arm and thigh pressured in order to know the effect of skin pressure applied by clothing on blood circulation. After release from pressure, we observed also recovery condition. At the same time, we examined relation between pressure and a feeling of tightness. Three physiques of healthy females, namely slender, standard and plump, served as subjects. We used intermittent method with skin pressure applied by experimental fabric at l-minute intervals. Besides we made a comparative study with results according to different restraint method (continuous method and intermittent method). As a result of this experiment, we obtained following findings. 1. The significant difference was marked at the pressure, measuring time, physique and measuring region with change of skin temperature under upper arm and thigh restraint by intermittent method. The peripheral skin temperature decreased with the lapse of restraint time. A remarkable tendency observed according to the. increase of restraint pressure. Recovery condition after release from pressure not yet recovered to original state, for all after a lapse of 10 min. The mean skin temperature decreased with the lapse of restraint time in case of upper arm restraint, it was not an obvious tendency except 60mmHg under thigh restraint. 2. Main factor affecting the evaluation of a feeling of tightness was restraint pressure, when the upper arm and thigh restraint by intermittent method. The respondence rate of 'very tight' grew larger according to the increase of restraint pressure. The value of pressure sensation declined after restraint ten times as compared with one time, but there was difference according to restraint pressure. 3. We reexamined change of skin temperature and feeling of tightness by different restraint method(continuous method and intermittent method). The results were as follows. 1) The skin temperature decreased more greatly during skin pressure by continuous method than intermittent method, especially in the peripheral. Without different restraint method, the skin temperature of slender plysique decreased more greatly than that of plump physique. 2) The value of pressure sensation by intermittent method was highly on both sites of upper arm and thigh.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.1-6
• /
• 1993

This report proposes a novel method of identification of continuous time-delay systems from sampled input-output data. By the aid of a digital pre-filter, an approximated discrete-time estimation model is first derived, in which the system parameters remain in their original form and the time delay need not be an integral multiple of th sampling period. Then an identification method combining the common linear least squares(LS) method or the instrumental variable(IV) method with the genetic algorithm(GA) is proposed. That is, the time-delay is selected by the GA, and the system parameters are estimated by the LS or IV method. Furthermore, the proposed method is extended to the case of multi-input multi-output systems where the time-delays in the individual input channels may differ each other. Simulation resutls show that our method yields consistent estimates even in the presence of high measurement noises.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.9
• /
• pp.660-669
• /
• 1987

Routh approximation method is the most computationally attractive. But this method may cause time-response error because this method does not match the time-response directly. In this paper a new mixed method for obtaining stable reduced-order models for high-order continuous-time systems is proposed. It makes use of the advantages of the Routh approximation method and the Minimization of Integral Squared Error(MISE) criterion approach. In this mixed method the characteristic polynomial of the reduced-order model is first obtained from that of original system by using the Auxiliary Denominator Polynomial(ADP). The numerator polynomial is then determined so as to minimize the intergral squared-error of unit step responses. The advantages of the propsed method are that the reduced models are always stable if the original system are stable and the frequency domain and time domain characteristic of the original system will be preserved in the reduced models.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.11a
• /
• pp.43-47
• /
• 2008

CWSII method was developed to overcome the problems of frequent occurrence in the application of existing downward construction methods, especially in the case of using slurry wall instead of SCW or CIP as a retaining wall. By the improvements in connecting steel beams with the wall, CWSII method is able to ensure the settlement of a steel beam and the diaphragm effect of a slab while reducing the degree of difficulty and the term of works and the cost of construction. As the desired results, CWS method can be applied as a practical downward construction method regardless of the type of retaining wall. In this paper, besides the concept and features of CWSII method, it can be seen that the method can provide reliable and economical performances by comparing with existing methods.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.901-903
• /
• 1995

The ordinary differential equation (ODE) method has been widely used for the convergence analysis of stochastic recursive algorithms. The principal objective of this method is to associate to a given algorithm a differential equation with continuous righthand side. Usually some assumptions should be imposed to get such a differential equation. If any of assumptions fails, then the ODE method cannot be used. Recently a new method using differential inclusions (DIs) was introduced in [3], which is useful to deal with those cases. The DI method shares the same idea with the ODE method, but it is different in that a differential inclusion is identified instead of a differential equation with continuous righthand side. In this paper, we briefly review the DI method and then analyze a Robbins and Monro (RM)-type algorithm. Our focus is placed on the projected algorithm.

• Structural Engineering and Mechanics
• /
• v.57 no.5
• /
• pp.861-876
• /
• 2016

The determination of the critical buckling load of multistory structures is important since this load is used in second order analysis. It is more realistic to determine the critical buckling load of multistory structures using the whole system instead of independent elements. In this study, a method is proposed for designating the system critical buckling load of torsion-free structures of which the load-bearing system consists of frames and shear walls. In the method presented, the multistory structure is modeled in accordance with the continuous system calculation model and the differential equation governing the stability case is solved using the differential transform method (DTM). At the end of the study, an example problem is solved to show the conformity of the presented method with the finite elements method (FEM).

• 전기의세계
• /
• v.17 no.1
• /
• pp.11-20
• /
• 1968

A typical type-1 positioning servomechanism is theoretically analyzed as a multirate sampled-data system which contains two or more signals sampled at different rates by the Z-transform method. And also it is analyzed as a continuous system by using the Younsei 101 Electronic Analog Computer. Comparing the solution of the multirate sampled data system with that of the continuous system to a step input, it is concluded that the response time of the output of the multirate sampled-data system is reduced by a multirate controller, the ripple between samples is lessened and all the transients are diminished within one period.

• Journal of Korea Multimedia Society
• /
• v.16 no.1
• /
• pp.50-55
• /
• 2013

This article presents a simple and reasonable in-service, real-time, and continuous single-ended objective video quality assessment model for DTV broadcasting using a multiburst signal at the bottom of the transient effect area, similar to Vertical Interval Test Signals. The issue of in-service video-quality monitoring in DTV broadcasting is addressed, and an effective method of quality monitoring is presented. The proposed method is also implemented and tested in a range of situations using a simulated HDTV broadcasting network.