• 반도체디스플레이기술학회지
• /
• 제22권4호
• /
• pp.87-92
• /
• 2023

As the elderly population increases, the number of patients with various joint diseases, including degenerative arthritis, is steadily increasing. CPM medical devices are needed to effectively treat degenerative arthritis that is common in the elderly population. Domestic CPM medical devices have limited functions and are highly dependent on imports for expensive imported medical devices. To solve this problem, we designed a ROM measurement function using a current sensor that is not present in existing composite joint CPM medical devices. The algorithm was designed using the fact that the force caused by joint stiffness greatly increases the current flowing through the DC motor. In addition, the need for digital healthcare in the medical field is gradually expanding as the proportion of chronically ill patients increases due to the spread of the non-face-to-face economy due to COVID-19 and the aging population. Therefore, this paper aims to improve the performance of CPM medical devices by allowing real-time confirmation of rehabilitation exercise information and operation range measurement results in accordance with digital healthcare trends through a Bluetooth application developed as an Android studio.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.1007-1012
• /
• 2000

This study is to present a design method using continuous tendons in IPC girders. Present design methods use just concrete to make continuity between girders. In these design methods cracks occur in almost every joint area of girders. This means that these girders act as simple beam instead of continuous beams. The design method which is presented here uses continuous tendons between girders. In this method the cracks could be restrained. So the girders behave as continuous beams, which this method allows the span length gets longer than simple girders and also the section height could get lower. In this way the number of piers and the weight of super structure could be reduced which means the construction cost could also be reduced.

• 응용통계연구
• /
• 제33권2호
• /
• pp.123-136
• /
• 2020

하나의 개체에서 여러가지 측정치가 동시에 관찰되는 경우는 다양한 연구 분야에서 흔히 나타난다. 발달 독성학 연구에서는 특정 독성 물질의 각기 다른 수준에 노출된 임신한 어미 쥐에 대해 기형인 태아의 존재와 태아의 무게가 동시에 측정된다. 이런 두 변수를 결합하여 모형화하는 것은 각기 독립적인 두 모형으로 분석하는 것보다 더 효율적인 결과를 낸다고 알려져 있다. 대부분의 결합 모형은 정규분포를 랜덤효과로 가정하여 분석한다. 그러나 발달 독성학 연구에서처럼 반응변수들의 분포가 독성 물질이 변함에 따라 불규칙하게 변하는 경우 정규분포의 가정으로는 그 특징을 잡아낼 수 없게 된다. 본 논문에서는 이진수 자료와 연속형 자료에 대해 비대칭 로짓 모형을 사용한 베이지안 결합모형을 제시한다. 본 모형은 비대칭 로짓 모형을 사용함으로써 반응변수의 분포의 형태가 독성 물질의 수준에 따라 대칭/비대칭의 형태를 자유롭게 띨 수 있는 장점을 가지고 있다. 모형의 적합성을 살펴보기 위해 발달 독성학 연구에서 독성 물질 DEHP에 적용하여 그 결과를 확인해본다.

• The Journal of Korean Physical Therapy
• /
• 제32권6호
• /
• pp.348-353
• /
• 2020

Purpose: This study examined the comparison of effects of non-surgical continuous and intermittent traction on pain, balance and physical function in the treatment of knee osteoarthritis. Methods: A total of 30 knee osteoarthritis patients were recruited and randomized to a continuous traction group (n=10), an intermittent traction group (n=10), and a control group (n=10). The continuous traction group and intermittent traction group received a non-surgical continuous and intermittent knee joint traction workout five times a week, for 4 weeks. All subjects were assessed with the numeric rating scale (NRS), timed up and go test (TUGT), and Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) before and after the 4-week treatment. Results: As a result of comparison within groups, the continuous traction group, intermittent traction group, and control group showed a significant difference for NRS, TUGT, and WOMAC after the experiment (p<0.05). According to the comparison of the three groups, the continuous traction group showed a more effectively significant difference than the intermittent traction group and the control group in the balance and physical functions before and after the experiment (p<0.05). Conclusion: This study showed that non-surgical continuous traction treatment was effective in improving pain, balance ability, and physical function in knee osteoarthritis patients.

• 근관절건강학회지
• /
• 제3권2호
• /
• pp.135-150
• /
• 1996

This study was performed to analyze the patient's experience during the progress of disease in the patients with osteoarthritis, who are taken the replacement surgery of knee Joint. The examine was consisted of five patients with osteoarthritis, who are taken the replacement surgery of knee joint from Dec. 4. 1995 to May, 20, 1996 at C university hospital. After hospitalization, the physical and psycho-logical status of the patients during preoperation, postoperation and discharge was examined. The data were examined according to the ethnographic method. The results are as follows. The patients experienced the periods of embarrasment, conflict, before surgery suffering, acceptance period after surgery. In the embarrasment period, the patients take a multiple medication therapy including hospital treatment, oriental medication and folk medication to ameliorate joint pain after first diagnosis on arthritis. The embarrasment period includes compulsive drug medication, oriental medication, folk medication, trouble some, sadness and survey of hospitals. In the conflict period, the patients consider the operation of knee because of working difficulty and severe Joint Pain, while they feel anxiety about the surgery. They condemn their physical situations. They have the conflict and anxiety on surgical operation. they consider the quality of life. They hope the surgery makes patients to improve walking ability. This period includes self-condemned, sorry, tiresomeness, expectation, worrisomeness, anxiety and hesitance. In the suffering period, the patients experience post operation physical discomfort after the total knee replacement. They do physical exercise, including extension and straight leg raising to maintain walking ability, while they endure to wait approximately 6 months for normal walking movements and they are also unstable to environmental people's sight. This period includes postoperative pain, continuous discomfort, inability and communication difficulty to other's people. In the acceptance period, the patients consider longerity of artificial Joint and also endure mild remaining joint pain. Some of them have religions for their wellbeing of life. This period include a self-protesting policy, abandonment, self-consolation, dependence on religions. According to the result from this study I suggested these shown below. 1) After replacement surgery of knee joint, continuous investigation on outcome patient is necessary. 2) It is also necessary to analyze on patient's experiences, who are taken the replacement surgery of hip Joint. 3) Study on disease experiences of patients with rhematoid arthritis, who take drug medication and physical therapy alone without surgery, is necessary. 4) Investigation on patient's favorable folk medication may be helpful to analyze disease experience of patients with osteoarthritis.

• Steel and Composite Structures
• /
• 제19권1호
• /
• pp.209-221
• /
• 2015

Results from an experimental study on the seismic response of six composite reinforced concrete column-to-steel beam interior joints are presented. The primary variable investigated is the details in the joint. For the basic specimen, the main subassemblies of the beam and column are both continuous, and the steel beam flanges extended to the joint are partly cut off. Transverse beam, steel band plates, cove plates, X shape reinforcement bars and end plates are used in the other five specimens, respectively. After the joint steel panel yielded, two failure modes were observed during the test: local failure in Specimens 1, 2 and 4, shear failure in Specimens 3, 5 and 6. Specimens 6, 3, 5 and 4 have a better strength and deformation capacity than the other two specimens for the effectiveness of their subassemblies. For Specimens 2 and 4, though the performance of strength degradation and stiffness degradation are not as good as the other four specimens, they all have excellent energy dissipation capacity comparing to the RC joint, or the Steel Reinforced Concrete (SRC) joint. Based on the test result, some suggestions are presented for the design of composite RCS joint.

• 동력기계공학회지
• /
• 제21권1호
• /
• pp.57-62
• /
• 2017

The flexible joint with bellows and flange is made by welding bellows and flange in general. The welded parts cause a crack or demage in the flexible joint due to continuous vibration and fatigue limit. This paper is concerned with development of flexible joint with non-welded, free rotation of flange and non-packing to improve fatigue failure condition between bellows and flange. The support box and support plate that are components of press part are designed to compress fore-end of bellows only without demage of bellows. The production system of flexible joint is designed with piston attached on the compression side. The simulation is performed using Deform 3D software. As the result of simulation, the shape of compressed bellows was most proper in the compression power of $157kg{\cdot}f$ and any deformation has not occurred at a part besides fore-end. The result show that the production possibility of the designed flexible joint.

• 한국공간구조학회논문집
• /
• 제3권1호
• /
• pp.87-97
• /
• 2003

The structural system that discreterized from continuous shells is frequently used to make a large space structures. As well these structures show the unstable phenomena when a load level over the limit load, and snap-through and bifurcation are most well known of it. For the collapse mechanism, rise-span ratio, element stiffness and load mode are main factor, which it give an effect to unstable behavior. In our real situation, most structures have semi-rigid joint that has middle characteristic between pin and rigid joint. So the knowledge of semi-rigid joint is very important problem of stable large space structure. And the instability phenemena of framed space structures show a strong non-linearity and very sensitive behavior according to the joint rigidity For this reason In this study, we are investigating to unstable problem of framed structure with semi-rigidity and to grasp the nonlinear instability behavior that make the fundamental collapse mechanism of the large space frame structures with semi-rigid joint, by proposed the numerical analysis method. Using the incremental stiffness matrix in chapter 2, we study instability of space structures.

• Journal of Welding and Joining
• /
• 제32권3호
• /
• pp.95-101
• /
• 2014

Joining of grey cast iron by fusion welding has much difficulties for its extremely low ductility and low toughness because of the flake form of the graphite. And the brittle microstructure, i.e. ledeburite may be formed during fusion welding by its rapid cooling rates. By these kinds of welding problem, preheat and post heat treatment temperature must be increased to avoid weld crack or welding problems. In order to avoid these fusion welding problem, friction welding of cast iron was carried out for improving joint soundness, establishing friction welding variables. There is no factor for evaluating friction weldability in continuous drive type friction welding. In this point of view, this study proposed the parameters for calculating friction weld heat input. The results obtained are as follows ; 1. There was a close relationship between tensile strength and flash appearance of friction welded joint. 2. Tensile strength was decreased and flash was severely oxidized as increasing frictional heating time. 3. As increased forging pressure $P_2$, flash had a large crack and tensile strength was decreased. 4. As powdered graphite by rotational frictional force induced flat surface and hindered plastic flow of metal, tensile strength of welded joint was decreased. 5. Heat input for continuous drive type friction welding could be calculated by the factors of $P_1$, $P_2$ and upset distance(${\delta}$).

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(II)
• /
• pp.552-556
• /
• 2003

Expansion joint is the absorbing structure when the upper structure of bridge have the drying shrinkage and creep from the change of temperature or construction badness. Because it has the fatigue from continuous vehicles traffic. the durability and performance is verified by the static and dynamic loading test In this study. we make the decision that T-MAT type expansion joint is applied in railway bridge and the expansion joint was tested by the criterion of Korea High Speed Rail Construction Authority.