• 한국정보시스템학회지:정보시스템연구
• /
• 제23권1호
• /
• pp.73-91
• /
• 2014

Microblog is emerging as a new communication service because of its usefulness and real-time accessability. Recently, microblog services, such as twitter and me2day in Korea, are getting a great attention. Continuous use intention is critical to sustain the service. However, most recent studies are based on Technology Acceptance Model(TAM) and Expectation Confirmation Model(ECM). These models are only focused on individual factors and overlook social influence factors. Social influence has been indicated as a critical factor of technology adoption and diffusion in social context(Davis, 1989; Fulk et al., 1987). In this study, we explore factors related to social influence which effect on continuous use intention for 'me2day' that is one of the most famous microblog in Korea. The purpose of this study is to understand continuous use intention and examine the relationship among social influence factors, social presence, and continuous use intention. To understand the phenomenon of continuous use intention in microblog service, this study employed social influence theory and expanded it by adding personal network exposure and group norm as additional social influence factors. The results show that social identity, group norms, and social presence positively influences continuous use intention. Contrary to our expectation, personal network exposure does not influence on continuous use intention. Academically, this research can contribute to microblog research field through elucidating the relationship among social influence factors, social presence, and continuous use intention. Although there is not enough research which is considered social influence factors as major explanation for continuous use intention, this study can give novel point of view to understand continuous use intention of microblog. Practically, service providers could consider ways to encourage users to continually use microblog service by reinforcing social influence factors and social presence.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권4호
• /
• pp.306-312
• /
• 2006

Two culture modes, continuous and semi-continuous, of the decolorization fungus, Geotrichum candidum Dec 1, were compared to obtain a high treatment efficiency of molasses decolorization and a large productivity of peroxidase (DyP) to simultaneously decolorize dyes and molasses. The continuous culture of G. candidum Dec 1 using a 5-I jar-fermentor showed high DyP activity at a low dilution ratio of $0.005h^{-1}$, and decolorization ratio of molasses of 80% was obtained concomitantly. Therefore, a semi-continuous culture was performed by repeated refill and draw. In this mode, approximately 1.5 liters of the culture broth was replaced per cycle when the decolorization ratio of molasses was near 80%. The molasses medium (1.0 liter per day) was treated and the peroxidase productiveity in the drawn culture broth was 26.6U/day, whereas the peroxidase productiveity was 17.9U/day in the continuous culture with a dilution rate of $0.005h^{-1}$. The semi-continuous treatment system was an efficient decolorization method for the strain, G. candidum Dec 1.

• 한국정보통신학회논문지
• /
• 제15권7호
• /
• pp.1525-1530
• /
• 2011

다양한 센서들로부터 실시간으로 수집되는 데이터를 분석, 처리해야하는 유비쿼터스 환경의 다양한 응용서비스(모니터링 서비스)를 개발하기 위해서는 반드시 연속질의 처리 방법이 요구된다. 기존 연구에서 연속질의는 대부분 간격질의와 영역질의만으로 표현되고, 이러한 질의에 대한 처리 기법들이 제시되었다. 그러나 연속질의의 종류는 매우 다양하며, 속성 조건, 공간 조건, 시간 조건의 결합을 통해 표현될 수 있다. 이 논문에서는 연속질의의 종류를 분류하고, 여러 조건들의 결합을 통해 표현 가능한 연속질의 모델을 제안하고자 한다. 이 논문은 연속질의를 표현하는 질의 모델을 제안함으로써, 연속질의 처리를 위한 다양한 후속 연구에 대한 방향을 제시하는데 기여하였다.

• Structural Engineering and Mechanics
• /
• 제31권5호
• /
• pp.605-619
• /
• 2009

A comparative experimental study of prestressed continuous steel-concrete composite beams was carried out. Two continuous composite beams were tested, one of which was plain continuous steel-concrete composite beam, while the other was a composite beam prestressed with external tendons. Cracking behavior and the load carrying capacity of the beams were investigated experimentally. Full plasticity was developed in the mid-span section each beam, the maximum moments attained at the internal support sections however were governed by local buckling which was related to the slenderness of composite section. It was found that in hogging moment regions, the ultimate resistance of an externally prestressed composite beam would be governed by either distortional lateral buckling or local buckling, or interactive mode of these two buckling patterns. The results show that exerting prestressing on a continuous composite beam with external tendons will increase the extent of internal force and moment redistribution in the beam. The influences of local and distortional buckling on the behaviors of the composite continuous beams are discussed. The Moment redistribution and the load carrying capacity of the prestressed continuous composite beams are evaluated, and it is found that at the ultimate state, the moment redistribution in the prestrssed continuous composite beams is greater than that in non-prestressed composite beams.

• The Journal of Korean Physical Therapy
• /
• 제32권6호
• /
• pp.348-353
• /
• 2020

Purpose: This study examined the comparison of effects of non-surgical continuous and intermittent traction on pain, balance and physical function in the treatment of knee osteoarthritis. Methods: A total of 30 knee osteoarthritis patients were recruited and randomized to a continuous traction group (n=10), an intermittent traction group (n=10), and a control group (n=10). The continuous traction group and intermittent traction group received a non-surgical continuous and intermittent knee joint traction workout five times a week, for 4 weeks. All subjects were assessed with the numeric rating scale (NRS), timed up and go test (TUGT), and Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) before and after the 4-week treatment. Results: As a result of comparison within groups, the continuous traction group, intermittent traction group, and control group showed a significant difference for NRS, TUGT, and WOMAC after the experiment (p<0.05). According to the comparison of the three groups, the continuous traction group showed a more effectively significant difference than the intermittent traction group and the control group in the balance and physical functions before and after the experiment (p<0.05). Conclusion: This study showed that non-surgical continuous traction treatment was effective in improving pain, balance ability, and physical function in knee osteoarthritis patients.

• 대한치과보철학회지
• /
• 제31권3호
• /
• pp.385-393
• /
• 1993

Injection processing of denture base resin was introduced by Pryer in 1942, in an attempt to reduce processing shrinkage. More recently a continuous-pressure injection type technique has been developed (SR-Ivocap, Ivoclar AG, Schaan, Liechtenstein.), and it reduced processing error and increased resin density. The purpose of this study was to compare tensile bond strength of heat-cured, cold-cured, and light-cured denture base resin bonded to continuous-pressure injection type resin. To know it, 60 cylindrical resin specimens were fabricated, and tensile bond strength were measured. The results were as follows : 1. The mean tensile bond strength bonded to continuous-pressure injection type resin was lower than bonded to conventional heat cured resin. But tensile bond strength of conventional heat cured resin bonding with light cured resin was lower than continuous-pressure injection type resin. 2. Of the tensile bond strength bonded to continuous-pressure injection type resin, tensile bond strength bonding with continuous-pressure injection type resin was the greatest(but not significantly different from bonding with conventional heat cured resin), followed by cold-cured, light-cured resin. 3. Of the tensile bond strength bonded to conventional heat cured resin, tensile bond strength bonding with conventional heat cured resin was the greatest and followed by continuous-pressure injection type resin, cold-cured resin, light-cured resin. According to these results, bonding of continuous-pressure injection type resin with conventional heat cured resin or continuous-pressure injection type resin is acceptable, but bonding with light-cured resin is questionable.

• 대한기계학회논문집
• /
• 제6권4호
• /
• pp.323-330
• /
• 1982

The vibration characteristics of continuous span periodically supported beams with moving loads are determined theoretically and experimentally. Moving loads are assumed to travel at constant acceleration with constant magnitude. Analyses by using the Fourier Transform technique are developed to determine the dynamic performance of moving load interacting with multiple and continuous beam. Equation of motion for the moving load is non-dimensionalized. Non-dimensional deflection proflies of continuous beam are presented in detail for the single concentrated moving load with constant acceleration. Experimental moving load and continuous beam models are developed. The maximum deflections at each midpoints 5,7 and 9 span beam are measured and their non-dimensional maximum deflections are presented. The non-dimensional maximum deflection of continuous beam is compared with measured maximum deflection of 9 span beam and found to agree reasonably well. The deflection of continuous beam due to moving load with acceleration is strongly influenced in the resonance region.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2000년도 추계학술대회 논문집
• /
• pp.142-149
• /
• 2000

Most of supply chain simulation models have been developed on the basis of discrete-event simulation. Since supply chain systems are neither completely discrete nor continuous, the need of constructing a model with aspects of both discrete-event simulation and continuous is provoked, resulting in a combined discrete-continuous simulation. Continuous simulation concerns the modeling over time of a system by a representation in which the state variables change continuously with respect to time. In this paper, an architecture of combined modeling for supply chain simulation is proposed, which presents the equation of continuous part in supply chain and how these equations are used supply chain simulation models. A simple supply chain model is demonstrated the possibility and the capability of this approach.

• 통상정보연구
• /
• 제8권1호
• /
• pp.15-31
• /
• 2006

There is no overdoing of enforcement of the importance of strategical mind which indicates future direction when management environment around organizations are variously changing. This document describers preceding and comparison research about competition strategy, competitive advantage and IT centered on organizations' common issue "Guarantee of Continuous Competitive Advantage" and researched various factors to determined if Information Technology is functioning properly through the cases of excellent organizations operating continuous competitive advantage Continuous competitive advantage's source is evaluating positively about resource based view which is described by innovation of business process. However, reality of operating continuous competitive advantage with difficult imitation of business process' "Time" "Complexity" is insufficient. Confirm how continuous competitive advantage is operated in reality by accepting easy application of "Simple Concise" business process. Confirm existence of information technology capability creating difficult imitation is functioning as a source of continuous competitive advantage, not Information Technology resource supporting business process.

• 한국건축시공학회지
• /
• 제2권4호
• /
• pp.99-104
• /
• 2002

Recently, the continuous fiber materials has become more important materials to repair and to reinforce concrete structural members. Continuous fiber meshes are effective for shear and confining reinforcement and provide excellent durability when combined with high strength mortar The purpose of this study is to verify the relationship between concrete strength and the ductility of inner concrete confined laterally by continuous fiber meshes. For this study, Experimental studies were conducted by compressive members using the cast frame of high strength mortar and continuous fiber meshes. Therefore, the result shows that compressive strength and ductility has improved according to the amount of the fiber meshes, and that the lateral confined effect of members with 3- or 4-axis mesh arrangement is bigger than that of members with 2-axis mesh. These data have to be used to verify the characteristic of concrete structure members reinforced continuous fiber mesh.