• Science of Emotion and Sensibility
• /
• v.13 no.1
• /
• pp.21-32
• /
• 2010

This study investigated the effects of contiguity and reading mode on cognitive load factors measured by Galvanic Skin Response(GSR). In this study two experimental conditions were imposed to participants to measure cognitive load with the high contiguity picture and low contiguity picture. Thirty-four college students participated to this experiment(experiment group=17, control group=17), and spilt-plot factorial design was applied to control individual difference in galvanic skin response. Tasks of this experiment were reading and summary. The dependent variables were skin conductance response, and perceived difficulty. The independent variables were the degree of contiguity of visual material(high contiguity vs. low contiguity). The major result of this study was identification of a significant difference of GSR with low contiguity condition. Indeed it was identified that more complex reading condition required more cognitive loads. This finding supported that different cognitive process might require different amounts of cognitive loads. For the further research, this study discussed the validity of applying physiological signals to assess cognitive loads and relationships the associated affective reactions.

• Korean Journal of Materials Research
• /
• v.15 no.2
• /
• pp.85-88
• /
• 2005

[ $W-15wt.\%$ ] Cu nanocomposite powders are fabricated by ball-milling and subsequent hydrogen-reduction. The compacted parts of $W-15wt.\%Cu$ nanocomposite powders were sintered at $1200^{\circ}C$ for 1 h with various heating rates of 5 and $20^{\circ}C/min$. The homogeneity of the sintered microstructures was evaluated through homogeneity index by the standard deviation of Victor's hardness test. The W-W contiguities were calculated by using Voronoi diagrams. The sintered microstructure with the heating rate of $20^{\circ}C/min$ was more homogeneous and had lower W-W contiguity than that of $5^{\circ}C/min$. The microstructural homogeneity was directly related to the W-W contiguity. Thermal conductivity of the sintered parts with the heating rate of $20^{\circ}C/min$ was higher than that with heating rate of $5^{\circ}C/min$. This phenomenon indicates that the thermal conductivity is affected by the W-W contiguity resulting from the homogeneity of the sintered microstructure.

• Journal of Powder Materials
• /
• v.11 no.1
• /
• pp.43-49
• /
• 2004

The electrical and thermal conductivity of W-Cu composites were investigated as a function of the W-particle size and W-W contiguity. Powder mixtures were prepared by ball milling or mechanical alloying process, and then sintered at various temperatures. The electrical conductivity of sintered composite was increased with decreasing W grain size. Dependence of electrical conductivity on the W grain size was explained by the W-W contiguity concept. The thermal conductivity was increased with increasing the temperature up to $600^{\circ}C$ but decreased at the temperature above $600^{\circ}C$ Also, thermal conductivity value was influenced by the W particle size. Change of thermal conductivity in W-Cu composites was discussed based on the observed microstructural characteristics and theoretical considerations.

• Journal of the Korean Ceramic Society
• /
• v.43 no.4 s.287
• /
• pp.213-219
• /
• 2006

A Monte Carlo simulation based on Potts model in a three dimensional lattice was studied to analyze and design microstructures in porous sintered compacts such as porosity, pore size, grain (particle) size and contiguity of grains. The effect of surface energy of particles and the content of additional fine particles to coarse particles on microstructure development were examined to obtain fundamentals for material design in porous materials. It has been found that the larger surface energy enhances sintering (necking) of particles and increases contiguity and surface energy does not change pore size and grain size. The addition of fine particles also enhances sintering of particles and increases contiguity, but it has an effect on increment of pore size and grain size. Such a simulation technique can give us important information or wisdom for design of porous materials, e.g., material system with high surface energy and fine particle audition are available for higher strength and larger porosity in porous sintered compacts with applications in an automobile.

• Journal of Hydrogen and New Energy
• /
• v.24 no.3
• /
• pp.237-241
• /
• 2013

The correlation between NiO-YSZ microstructure and its electrical property used for SOFC anode was critically evaluated with image processing and direct measurement techniques. These innovative processing techniques were employed to quantify the contiguity of the anode constituent phase. The calculated contiguities were then correlated with electrical conductivity attained from 4-probe DC method. This investigation described that contiguity of nickel oxide phases of an anode has a linear relationship with its electrical conductivity. We observed that the contiguity of NiO increased from 0.18 to 0.50 then electrical conductivity attained was significantly increased from 520 S/cm to 1468 S/cm at $900^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.37 no.5
• /
• pp.479-490
• /
• 2000

The microstructure of Ni-YSZ composite as an anode of SOFC was investigated as a function of Ni content(10-70 vol%) in order to examine the correlation between microstructural-and electrical property. Image analysis based on quantitative microscopy theory was performed to quantify the microstructural property. We could get the informations about the size and distribution, contiguity and interfacial area of each phase or between the phases from the image analysis. According to the image analysis, contiguity between the same phae was mainly dependent on the amount of the phase while the contiguity between different phases was additionally influenced by the microstructural changes, especailly by the coarsening of the Ni phase. The whole length of pores perimeter was increased as Ni content increased, which indicated the overall microstructural evolution was mostly related with the coarsening of Ni phase. Ni-Ni interfacial area was also gradually increased as Ni content increased but controlled by pore phase at low Ni content region and by YSZ phase at intermediate Ni content region. These quantified microstructural properties were used to characterize the electrical properties of Ni-YSZ composite.

• Journal of KIISE:Databases
• /
• v.35 no.2
• /
• pp.192-198
• /
• 2008

It is difficult to get relevant information on vast Web data. Search engines summarize and store Web information and show the ranked lists based on user queries affected by relative importance and user-adaptation. But these have limitation with showing user-intended information at the top priority. User intention is presented in general within query itself. In this paper, we propose the selective rankup methodology of user-intended search results based on weighting internal contiguity in query terms. With experimental results, we can find user-intended results with 75.8% probability using this simple method only, and efficiency of rerank proposed outperforms ordinary case by $13{\sim}20%$.

• Journal of the Korean Institute of Educational Facilities
• /
• v.10 no.4
• /
• pp.31-41
• /
• 2003

The purpose of this study is to analyze the Characteristic of Block Plans related to site types of Elementary Schools in Kangju city. With analysis of 17 elementary school plans, we reached same conclusions. First, there is a possibility of seeing 4 examples that contiguity road condition and proportion of site, neighborhood park location, district units planning, which as classification the condition to feature of location. But the condition which is considered actually from Block Plan appeared with only contiguity road condition and district units planning two onlines. Second, despite there are elements having the possibility effecting to Block Plan, some arrangement forms are repeatedly used. There is a possibility of searching for that cause that it falls in mannerism of space form, type and place when it follows the arrangement form of existing defined as school.

• Journal of Powder Materials
• /
• v.20 no.2
• /
• pp.138-141
• /
• 2013

The microstructure evolution during sintering of the W-5 wt.%Cu nanocomposite powders was investigated for the purpose of developing a high density W-Cu alloy. The W-5 wt.%Cu nanopowder compact, fully-densified during sintering at 1623 K, revealed a homogeneous microstructure that consists of high contiguity structures of W-W grains and an interconnected Cu phase located along the edges of the W grains. The Vickers hardness of the sintered W-5 wt.%Cu specimen was $427{\pm}22$ Hv much higher than that ($276{\pm}19$ Hv) of the conventional heavy alloy. This result is mostly due to the higher contiguity microstructure of the W grains compared to the conventional W heavy alloy.

• Journal of the Korean housing association
• /
• v.12 no.4
• /
• pp.105-113
• /
• 2001

This research indicates to controversial point that store equipments were not applying correct development factor in the each apartment house by that change rate by scale and uniformity of form and inefficiency, effect of discount store is increasing in apartment house and progressed research. The result are as follows; First, interior main point of store of that influence greatly to change rate number of store be. Second, being lot area in jar in outside factor of store. Third, discount store separation appeared by leading person who influence greatly to change rate in middle who is contiguity market singleness residential quarter and contiguity existence of commercial district and nonexistence and discount store separation of only outside right near at hand. Construction of commerce equipment may have to consist in practical apartment house after examine various kinds factor such as store indoor, store outside and only outside while plan practical use of systematic and efficient commerce equipment focusing more in efficient utilization of commerce institution that consist after plan that is not planed commerce equipment focusing in development in plan of commerce equipment in apartment house hereafter accordingly.