• 감성과학
• /
• 제13권1호
• /
• pp.21-32
• /
• 2010

이 연구는 그림 자료의 근접성(고근접 vs. 저근접)에 따른 제시여부와 읽기모드(단순읽기 vs. 요약읽기)에 따른 학습자의 인지부하 차이를 검증하기 위한 것이다. 특히, 이 연구에서는 전기피부반응을 통하여 인지부하의 정도를 측정하였다. 실험참가자는 34명(통제집단=17명, 실험집단=17명)이었으며 고근접 조건과 저근접 조건에 대한 반복구획요인설계를 적용하였다. 또한 각 실험조건에서 측정된 과제난이도 지각점수를 공변량으로 투입하여 학습자의 사전지식에 의한 영향력을 통제하였다. 그림 자료의 근접성의 정도에 따라서 고근접 그림 자료와 저근접 그림 자료가 순차적으로 제시되었다. 처음에는 단순읽기 모드가 제시되었고 이후에 요약읽기를 수행하였다. 전기피부반응은 단순읽기와 요약읽기에서 모두 측정되었다. 이 연구의 종속변수는 전기피부반응과 지각된 난이도였다. 연구결과에 따르면 고근접 자료가 제시된 조건에서는 유의미한 차이를 발견할 수 없었다. 그러나 저근접 조건에서는 그림 자료의 제시여부 및 읽기모드 사이에서 유의미한 차이가 있었다. 즉, 저근접 조건에서는 텍스트만 제시하는 것보다는 그림 자료가 제시될 때 전기피부반응이 올라갔다. 또한 단순 읽기 보다 요약읽기에서 더 높은 전기피부반응이 측정되었다. 이 연구의 결과는 저근접 그림은 인지부하를 유발하는 요인이 될 수 있으며 읽기모드가 복잡해지면 인지부하가 높아질 수 있음을 보여주는 것이다. 동일한 자료를 활용한다고 하더라도 인지과정의 복잡성 정도에 따라서 인지부하가 달라질 수 있다는 것이다. 그러나 학습성취과 같은 과제수행 요인과 더 높은 난이도에서의 인지부하 측정에 대한 후속연구가 필요하다.

• 한국재료학회지
• /
• 제15권2호
• /
• pp.85-88
• /
• 2005

[ $W-15wt.\%$ ] Cu nanocomposite powders are fabricated by ball-milling and subsequent hydrogen-reduction. The compacted parts of $W-15wt.\%Cu$ nanocomposite powders were sintered at $1200^{\circ}C$ for 1 h with various heating rates of 5 and $20^{\circ}C/min$. The homogeneity of the sintered microstructures was evaluated through homogeneity index by the standard deviation of Victor's hardness test. The W-W contiguities were calculated by using Voronoi diagrams. The sintered microstructure with the heating rate of $20^{\circ}C/min$ was more homogeneous and had lower W-W contiguity than that of $5^{\circ}C/min$. The microstructural homogeneity was directly related to the W-W contiguity. Thermal conductivity of the sintered parts with the heating rate of $20^{\circ}C/min$ was higher than that with heating rate of $5^{\circ}C/min$. This phenomenon indicates that the thermal conductivity is affected by the W-W contiguity resulting from the homogeneity of the sintered microstructure.

• 한국분말재료학회지
• /
• 제11권1호
• /
• pp.43-49
• /
• 2004

The electrical and thermal conductivity of W-Cu composites were investigated as a function of the W-particle size and W-W contiguity. Powder mixtures were prepared by ball milling or mechanical alloying process, and then sintered at various temperatures. The electrical conductivity of sintered composite was increased with decreasing W grain size. Dependence of electrical conductivity on the W grain size was explained by the W-W contiguity concept. The thermal conductivity was increased with increasing the temperature up to $600^{\circ}C$ but decreased at the temperature above $600^{\circ}C$ Also, thermal conductivity value was influenced by the W particle size. Change of thermal conductivity in W-Cu composites was discussed based on the observed microstructural characteristics and theoretical considerations.

• 한국세라믹학회지
• /
• 제43권4호
• /
• pp.213-219
• /
• 2006

A Monte Carlo simulation based on Potts model in a three dimensional lattice was studied to analyze and design microstructures in porous sintered compacts such as porosity, pore size, grain (particle) size and contiguity of grains. The effect of surface energy of particles and the content of additional fine particles to coarse particles on microstructure development were examined to obtain fundamentals for material design in porous materials. It has been found that the larger surface energy enhances sintering (necking) of particles and increases contiguity and surface energy does not change pore size and grain size. The addition of fine particles also enhances sintering of particles and increases contiguity, but it has an effect on increment of pore size and grain size. Such a simulation technique can give us important information or wisdom for design of porous materials, e.g., material system with high surface energy and fine particle audition are available for higher strength and larger porosity in porous sintered compacts with applications in an automobile.

• 한국수소및신에너지학회논문집
• /
• 제24권3호
• /
• pp.237-241
• /
• 2013

The correlation between NiO-YSZ microstructure and its electrical property used for SOFC anode was critically evaluated with image processing and direct measurement techniques. These innovative processing techniques were employed to quantify the contiguity of the anode constituent phase. The calculated contiguities were then correlated with electrical conductivity attained from 4-probe DC method. This investigation described that contiguity of nickel oxide phases of an anode has a linear relationship with its electrical conductivity. We observed that the contiguity of NiO increased from 0.18 to 0.50 then electrical conductivity attained was significantly increased from 520 S/cm to 1468 S/cm at $900^{\circ}C$.

• 한국세라믹학회지
• /
• 제37권5호
• /
• pp.479-490
• /
• 2000

The microstructure of Ni-YSZ composite as an anode of SOFC was investigated as a function of Ni content(10-70 vol%) in order to examine the correlation between microstructural-and electrical property. Image analysis based on quantitative microscopy theory was performed to quantify the microstructural property. We could get the informations about the size and distribution, contiguity and interfacial area of each phase or between the phases from the image analysis. According to the image analysis, contiguity between the same phae was mainly dependent on the amount of the phase while the contiguity between different phases was additionally influenced by the microstructural changes, especailly by the coarsening of the Ni phase. The whole length of pores perimeter was increased as Ni content increased, which indicated the overall microstructural evolution was mostly related with the coarsening of Ni phase. Ni-Ni interfacial area was also gradually increased as Ni content increased but controlled by pore phase at low Ni content region and by YSZ phase at intermediate Ni content region. These quantified microstructural properties were used to characterize the electrical properties of Ni-YSZ composite.

• 한국정보과학회논문지:데이타베이스
• /
• 제35권2호
• /
• pp.192-198
• /
• 2008

수많은 웹 정보 중에서 사용자가 원하는 정보를 찾아내는 것은 매우 어렵다. 검색 엔진은 웹정보를 요약하였다가 사용자의 질의에 따라 상대적 중요도와 정보의 적합도를 반영한 검색순위를 제공한다. 그러나 이 순위는 개별 사용자가 원하는 정보를 상위 순위에 보여주는데 제한이 있다. 본 논문에서는 사용자의 검색 의도가 질의에 가장 잘 나타난다고 보고 질의의 의미를 잘 반영하는 웹 정보를 선택적으로 상위 순위화하기 위하여 질의 내부의 단어 인접도를 이용한 재순위화 방법을 제시하였다. 실험 결과 매우 간단한 방법으로 사용자가 요구하는 정보를 75.8%의 확률로 찾아낼 수 있으며, 선별된 정보들의 선택적인 순위 상승으로 $13{\sim}20%$의 검색 효율 향상을 기대할 수 있다.

• 교육시설
• /
• 제10권4호
• /
• pp.31-41
• /
• 2003

The purpose of this study is to analyze the Characteristic of Block Plans related to site types of Elementary Schools in Kangju city. With analysis of 17 elementary school plans, we reached same conclusions. First, there is a possibility of seeing 4 examples that contiguity road condition and proportion of site, neighborhood park location, district units planning, which as classification the condition to feature of location. But the condition which is considered actually from Block Plan appeared with only contiguity road condition and district units planning two onlines. Second, despite there are elements having the possibility effecting to Block Plan, some arrangement forms are repeatedly used. There is a possibility of searching for that cause that it falls in mannerism of space form, type and place when it follows the arrangement form of existing defined as school.

• 한국분말재료학회지
• /
• 제20권2호
• /
• pp.138-141
• /
• 2013

The microstructure evolution during sintering of the W-5 wt.%Cu nanocomposite powders was investigated for the purpose of developing a high density W-Cu alloy. The W-5 wt.%Cu nanopowder compact, fully-densified during sintering at 1623 K, revealed a homogeneous microstructure that consists of high contiguity structures of W-W grains and an interconnected Cu phase located along the edges of the W grains. The Vickers hardness of the sintered W-5 wt.%Cu specimen was $427{\pm}22$ Hv much higher than that ($276{\pm}19$ Hv) of the conventional heavy alloy. This result is mostly due to the higher contiguity microstructure of the W grains compared to the conventional W heavy alloy.

• 한국주거학회논문집
• /
• 제12권4호
• /
• pp.105-113
• /
• 2001

This research indicates to controversial point that store equipments were not applying correct development factor in the each apartment house by that change rate by scale and uniformity of form and inefficiency, effect of discount store is increasing in apartment house and progressed research. The result are as follows; First, interior main point of store of that influence greatly to change rate number of store be. Second, being lot area in jar in outside factor of store. Third, discount store separation appeared by leading person who influence greatly to change rate in middle who is contiguity market singleness residential quarter and contiguity existence of commercial district and nonexistence and discount store separation of only outside right near at hand. Construction of commerce equipment may have to consist in practical apartment house after examine various kinds factor such as store indoor, store outside and only outside while plan practical use of systematic and efficient commerce equipment focusing more in efficient utilization of commerce institution that consist after plan that is not planed commerce equipment focusing in development in plan of commerce equipment in apartment house hereafter accordingly.