• Journal of Biosystems Engineering
• /
• v.43 no.3
• /
• pp.237-246
• /
• 2018

Purpose: This study (a) investigated the effect of microwave power intensity and sample thickness on microwave drying characteristics of radish strips, and (b) determined the best-fit drying model for describing experimental drying data, effective moisture diffusivity ($D_{eff}$), and activation energy ($E_a$) for all drying conditions. Methods: A domestic microwave oven was modified for microwave drying and equipped with a small fan installed on the left upper side for removing water vapor during the drying process. Radishes were cut into two fixed-size strip shapes (6 and 9 mm in thickness). For drying experiments, the applied microwave power intensities ranged from 180 to 630 W at intervals of 90 W. Six drying models were evaluated to delineate the experimental drying curves of both radish strip samples. The effective moisture diffusivity ($D_{eff}$) was determined from Fick's diffusion method, and the Arrhenius equation was applied to calculate the activation energy ($E_a$). Results: The drying time was profoundly decreased as the microwave power intensity was increased regardless of the thickness of the radish strips; however, the drying rate of thicker strips was faster than that of the thinner strips up to a certain moisture content of the strip samples. The majority of the applied drying models were suitable to describe the drying characteristics of the radish strips for all drying conditions. Among the drying models, based on the model indices, the best model was the Page model. The range of estimated $D_{eff}$ for both strip samples was from $2.907{\times}10^{-9}$ to $1.215{\times}10^{-8}m^2/s$. $E_a$ for the 6- and 9-mm strips was 3.537 and 3.179 W/g, respectively. Conclusions: The microwave drying characteristics varied depending on the microwave power intensity and the thickness of the strips. In order to produce high-quality dried radish strips, the microwave power intensity should be lower than 180 W.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.16 no.4
• /
• pp.327-337
• /
• 1996

A field experiment was conducted at SNU Experimental Livestock Farm, Suweon in 1995 to determine effect of planting date on forage performance of wm hybrids of four different maturity groups. A split-plot design replicated three times was used, with com hybrids representing four maturity groups (115, 118, 121 and 125 days) being the main plots and planting dates (3124, 415, 415, 425, 515 and 5/15) the sub-plots. 1. Days to emergence and percent emergence from the March 24 planting were, on the average, 36 days and 58%, respectively, but those from the April 5 to May 15 planting averaged 12 days and 92%, respectively. 2. Plant and ear heights increased gradually as the dates of planting were delayed except the May 15 planting, however, percent ear was decreased as the dates of planting were delayed. There was a trend for the mean lodging percentage of the hybrids to be higher as the planting date was delayed. 3. The 115-and 118-day mediumearly maturing hybrids harvested on August 18 produced silages with a dry matter content between 27 and 30% at all planting dates except the May 15 planting, while the 121-and 125-day medium-late maturing hybrids produced silages with a dry matter wntent less than 27% regardless of any planting dates. 4. There were no significant differences in mean dry matter yield among the hybrids, but significant mean TDN yield differences were found. The 115-, 118- and 125-day hybrids had significantly higher mean TDN yield than the 121-day hybrid. There were significant differences in mean dry matter and TDN yields among the planting dates. The mean dry matter and TDN yields from the April 5, 15 and 25 plantings were significantly higher than those of other plantings, however, there were no significant differences in mean TDN yield among the April 5, April 15 and April 25 plantings. No significant planting date $\times$ maturity interactions were found for both the dry matter and TDN yields. 5. Mean stover NDF and ADF contents of the 115- and 118day hybrids were higher than those of the 121- and 125-day hybrids, but the reverse was true for mean stover IVDMD and RFV. Mean stover NDF an ADF contents increased with earlier plantings, but mean stover IVDMD and RFV increased when planting was delayed. Results of this experiment indicate that for corn planting in central and northern areas of Korea, early to mid-April may be the right time with the 115-to 118-day maturity hybrids when silage making before August 20 is taken into consideration.

• Korean Journal of Food Science and Technology
• /
• v.52 no.3
• /
• pp.290-295
• /
• 2020

In this study, the optimum conditions were established for anthocyanidin extraction from sweet potato tips and tubers. The dependent variables of ethanol concentration (X1), citric acid concentration (X2), and extraction temperature (X3) were designed using a central composite design. All three variables significantly affected anthocyanidin extraction, and the influence of X1 was greater than that of X2 and X3. The highest anthocyanidin content in tips and tubers were 26.58±0.07 and 117.32±0.39 mg/100 g at 50% (X1), 0.3% (X2), and 50℃ (X3), respectively. The optimal extraction conditions for the tips were 56.10% (X1), 0.25% (X2), and 52.24℃ (X3) and tubers were 55.08% (X1), 0.30% (X2), and 53.06℃ (X3). The predicted values under optimal extraction conditions were 27.45 and 119.61 mg/100 g, and the experimental values were 27.09±0.11 and 118.72±0.67 mg/100 g, respectively. The extraction conditions were validated by comparing the predicted and actual values with those of 98.69 and 99.26%, respectively.

• Korean Journal of Food Science and Technology
• /
• v.35 no.5
• /
• pp.777-782
• /
• 2003

Response surface methodology (RSM) was used to monitor the characteristics of ethanol extracts from Hericium erinaceus. A central composite design was applied to investigate the effects of independent variables, ethanol concentration $(X_1)$, and sample ratio $(X_2)$ on dependent variables, soluble solid $(Y_1)$, total phenols $(Y_2)$, crude protein $(Y_3)$, electron donating ability $(Y_4)$, and browning color $(Y_5)$ of the extracts. As the sample ratio increased, the soluble solid content increased. Ethanol concentration played a minor role. Total phenols and crude protein increased with sample ratio. Sample ratio had a greater effect than alcohol concentration in the extraction of soluble solid, total phenols, crude protein, and browning color, with an exception of electron donating ability. The optimum ranges at 2 hr extraction was $3.9{\sim}5.0\;g/l00\;mL$ in sample ratio and $36{\sim}52%$ in ethanol concentration. Predicted values at the optimized conditions were acceptable when compared to experimental values.

• Journal of Digital Contents Society
• /
• v.16 no.1
• /
• pp.105-112
• /
• 2015

The recent announcement of the EPUB3.0 e-book standard with enhanced features is expected to bring about much development and change to the production and circulation of e-books. This study thus set out to implement an EPUB3.0-based e-book containing various layout screens and interactive functions to stimulate readers' interest and investigate the production method considering the simultaneous publication of paper book and e-book. As for methodology and content, the investigator completed an edition and layout design and added an interactive function to it with Adobe Indesign CC(2014) and saved it as an EPUB3.0 file. She then opened the save EPUB file in the Sigil program, checked its specific codes and errors, and made revisions for its completion. The completed EPUB3.0 file was put to the test by installing four EPUB viewers, which were capable of implementing the EPUB3.0 features well based on the fitness results of epubtest.org and uploading files, in desktop and mobile devices. The present study claims its significance by implementing an EPUB3.0-based e-book capable of fixed layout and interactive features, cutting down the time and costs to make an e-book considerably by linking and using a production program, and proposing the possibility of simultaneous publication of paper book and e-book.

• Carbon letters
• /
• v.11 no.4
• /
• pp.279-284
• /
• 2010

Graphene is one of the most promising materials for many applications. It can be used in a variety of applications not only as a reinforcement material for polymer to obtain a combination of desirable mechanical, electrical, thermal, and barrier properties in the resulting nanocomposite but also as a component in energy storage, fuel cells, solar cells, sensors, and batteries. Recent research at Michigan State University has shown that it is possible to exfoliate natural graphite into graphite nanoplatelets composed entirely of stacks of graphene. The size of the platelets can be controlled from less than 10 nm in thickness and diameters of any size from sub-micron to 15 microns or greater. In this study we have investigated the influence of melt compounding processing on the physical properties of a polyamide 6 (PA6) nanocomposite reinforced with exfoliated graphite nanoplatelets (xGnP). The morphology, electrical conductivity, and mechanical properties of xGnP-PA6 nanocomposite were characterized with electrical microscopy, X-ray diffraction, AC impedance, and mechanical properties. It was found that counter rotation (CNR) twins crew processed xGnP/PA6 nanocomposite had similar mechanical properties with co-rotation (CoR) twin screw processed or with CoR conducted with a screw design modified for nanoparticles (MCoR). Microscopy showed that the CNR processed nanocomposite had better xGnP dispersion than the (CoR) twin screw processed and modified screw (MCoR) processed ones. It was also found that the CNR processed nanocomposite at a given xGnP content showed the lowest graphite X-ray diffraction peak at $26.5^{\circ}$ indicating better xGnP dispersion in the nanocomposite. In addition, it was also found that the electrical conductivity of the CNR processed 12 wt.% xGnP-PA6 nanocomposite is more than ten times higher than the CoR and MCoR processed ones. These results indicate that better dispersion of an xGnP-PA6 nanocomposite is attainable in CNR twins crew processing than conventional CoR processing.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.3
• /
• pp.165-175
• /
• 2007

The mobile agent executes a given task by which the agent code moves to the server directly. Therefore, node migration method becomes an important factor which impact on the whole performance of distributed system. In this paper, we propose an adaptive migration path technique of mobile agent using the metadata of naming agent. In this proposed technique, node selection for migration depends on the content of referenced metadata, and the reliability of migrated information is determined by the metadata updating method and cooperative operations of individual agents in multi-agents system. For these, we design the metadata using by the number of hit documents, hit ratio, node processing time and network delay time, and describe the methods for creating, using and updating metadata for which determine the adaptive node migration path of mobile agent according to the cooperation of individual agents and number of hit documents using by designed metadata. And results of evaluated performance for proposed adaptive migration path technique through the proper experiment and analysis gain rate of high effective information earning, because of high hit ratio(72%) about of fathered documents by case of applying metadata move to the 13 nodes. But, in case of non-applying metadata is hit ratio(46%) of gathered documents and rate of effective information earning about of 26 nodes is 36.8%.

• Korean Journal of Poultry Science
• /
• v.47 no.1
• /
• pp.49-59
• /
• 2020

The present study determined the effect of dietary cultivated microalgae (Parachlorella sp.) on the growth and immune responses of pre-starter broilers. A total of 320 one-day-old birds (Ross 308) were allocated to 4 treatments with 8 blocks in a randomized complete block design. The four experimental diets consisted of a corn-soybean meal-based control diet, and three diets contained 0.5%, 1.0%, and 1.5% microalgae powder at the expense of cornstarch in the control diet. After feeding the experimental diets for 7 days, the body weight and feed intake of all birds were measured, and 8 birds were randomly selected from each treatment. Peripheral blood mononuclear cells (PBMCs) and serum were harvested for immune profile assessment, including cytokines and cell migration receptors. No differences in growth performance were observed among the treatments. The birds that were fed diets containing graded levels of microalga showed a linear increase in the mRNA expression of cytokine genes in PBMCs, including that of IL2, IL1β, and IL18 (P<0.05). With respect to the chemokine receptor genes in PBMCs, mRNA expression of CCR2, CCR9, and ITGA4 changed quadratically (P<0.05), but that of CCR7 increased linearly (P<0.01). Cytokine protein secretion in blood, including that of IL-1β and IL-6, increased linearly (P<0.01) with an increase in the microalgal content. Overall, the present results show that the indigenous microalgae powder used in this study could stimulate immunity with no detrimental effects on the growth performance of pre-starter broiler chickens.

• Journal of the Korean Chemical Society
• /
• v.43 no.3
• /
• pp.321-327
• /
• 1999

The STS materials, emphasized in the 6th curriculum, in the chemistry part of middle school science textbooks were analyzed. The average value of the STS content of textbook was 13.2%. In the study of chapter of textbook, 15.9% of STS materials was included in the chapter of ？reaction of materials?, 12% in "character and separation of materials", and 10.8% in "composition of materials". When the STS topics classified by Piel were analyzed, the results were as follows; 40.2% on sociology of science, 28.8% on environmental quality and utilization of natural source, 20.4% on effects of technological developments, and 12.9% on energy. However, the topic on human engineering was only included in a textbook, and the topics on space research and national defence were not included in any textbooks. When the STS materials were analyzed by student activities of SATIS, the number of activities was 71. Most activities were consisted of solving problems and decision, simulation and data analysis, and there was no research design and role playing.

• Journal of Digital Convergence
• /
• v.10 no.11
• /
• pp.641-649
• /
• 2012

The purpose of this study is to look into development and effects of Mind and Happiness Program for personality cultivation of college students. The program referred to previous studies on personality cultivation, personality cultivation guidelines for college students (Lee Joo Hee, Park Hee Hyun, Park Eun Min, 2010), and 'guidance and reality of personality development' (Kim Yeo Ok, 1999). This program was composed of 13 contents in order to be available in liberal arts selective courses within one semester, each content consisting of 50-minute lecture and 50-minute field activity program. 88 college students at W university in Jeollabukdo was the subjects of experiment group participating in personality cultivation program, which was conducted for 100 minutes once a week over 13 weeks. Degree of participants' satisfaction in the program was measured by the frequency and percentage of surveyed items. Mean difference between pre-test and post-test of participants' self-efficacy and life satisfaction was verified by t-test for comparison and Cohen's d for level of effect, respectively. This survey results in enhancing the self-efficacy and life satisfaction of collegians joined liberal arts selective courses thru personality cultivation program. Furthermore, the subjects after the program intended to recommend this program to other students.