• 대한임상검사과학회지
• /
• 제37권3호
• /
• pp.178-184
• /
• 2005

Carry over contamination has been reduced in some systems by flushing the internal and external surfaces of the sample probe with copious amount of diluent. It between specimens should be kept as small as possible. A built-in, continuous-flow wash reservoir, which allows the simultaneous washing of the interior and exterior of the syringe needles, addresses this issue. In addition, residual contamination can further be prevented through the use of efficient needle rinsing procedures. In discrete systems with disposable reaction vessels and measuring cuvets, any carry over is entirely caused by the pipetting system. In analyzers with reuseable cuvets or flow cells, carry over may arise at every point through which high samples pass sequentially. Therefore, disposable sample probe tips can eliminate both the contamination of one sample by another inside the probe and the carry over of in specimen into the specimen in the cup. The results of the applicative carry over experiment studied on 21 items for total protein (TP), albumin (ALB), total bilirubin (TB), alkaline phosphatase (ALP), aspratate aminotranferase (AST), alanine aminotranferase (ALT), gamma glutamyl transferase (GGT), creatinine kinase (CK), lactic dehydrogenase (LD), creatnine (CRE), blood urea nitrogen (BUN), uric acid (UA), total cholesterol (TC), triglyceride (TG), glucose (GLU), amylase (AMY), calcium (CA), inorganic phosphorus (IP), sodium (Na), potassium (K), chloride (CL) tests in chematology were as follows. Evaluation of process performance less than 1% in all tests was very good, but a percentage of ALB, TP, TB, ALP, CRE, UA, TC, GLU, AMY, IP, K, Na, and CL was 0%, implying no carry over. Other tests were ALT(-0.08%), GGT(-0.09%), CK(0.08%), LD(0.06%), BUN(0.12%), TG (-0.06%), and CA(0.89%).

• Corrosion Science and Technology
• /
• 제13권5호
• /
• pp.163-169
• /
• 2014

The corrosion resistance of epoxy-coated carbon steel was evaluated. The carbon steel surface was subjected to different treatment methods such as steel grit blasting and power tool treatment as well as contamination of water soluble salt. To study the effect of the surface treatments and contamination, the topology of the treated surface was observed by confocal microscopy and a pull-off adhesion test was conducted. The corrosion resistance of the epoxy-coated carbon steel was further examined by electrochemical impedance spectroscopy (EIS) combined with immersion test of 3.5 wt% of NaCl solution. Consequently, the surface contamination by sodium chloride with $16mg/m^2$, $48mg/m^2$ and $96mg/m^2$ didn't affect the adhesion strength for current epoxy coated carbon steel and blister and rust were not observed on the surface of epoxy coating contaminated by various concentration of sodium chloride after 20 weeks of immersion in 3.5 wt% NaCl aqueous solutions. In addition, the results of EIS test showed that the epoxy-coated carbon steel treated with steel grit blasting and power tool showed similar corrosion protection performance and surface cleanness such as Sa 3 and Sa 2.5 didn't affect the corrosion protectiveness of epoxy coated carbon steel.

• 한국자동차공학회논문집
• /
• 제8권3호
• /
• pp.181-189
• /
• 2000

The aerodynamic characteristics of large transport vehicle has become more and more important in recent vehicle design to improve driving performance in high speed cruising and raise the product valve with regard to a comfortable driving condition. Hence, detailed knowledge of the flow field around truck coner vane is essential to improve fuel efficiency and reduce the dirt contamination on vehicle body surface. In this study, three-dimensional flow characteristics around corner vane attached to truck cabin were computed for the steady, incompressible, and high speed viscous flow, adopting the RNG k-$\varepsilon$ turbulence model. In order to investigate the influence of configuration and structure of corner vane, computations were carried out for four cases at a high Reynolds number, Re=4.1$\times$106 (based on the cabin height). The global flow patterns, drag coefficient and the distributions such as velocity magnitude, turbulent kinetic energy around the corner vane, were examined. As a result of this study, we could identify the flow characteristics around corner vane for the variation of corner vane length and width. Also, suggest the improved structure to reduce the dirt contamination in cabin side.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.207-210
• /
• 1998

Surface electrical conduction in insulator is most important factor to assess the insulation performances of outdoor insulating materials. In this paper, contamination performance of the widely used materials for outdoor insulator - porcelain, EPDM, Silicone rubber - were discussed by measuring properties of average leakage current and scintillation discharge pulses under artificial contamination conditions. The artificial contaminations used were deionized distilled water fog, 0.5wt% NaCl salt fog of light pollution and 2wt% NaCl salt fog of medium pollution. The average leakage current was appeared linearly with applied voltage at dry and clean surface condition. The magnitude of leakage current was almost same at different kinds of samples. In case of deionized distilled water fog, the characteristics of leakage current and applied voltage was most different to that in case of dry and clean condition. In case of salt fog pollution condition. The leakage current was increased above critical voltage. The scintillation discharges were also activated at the level the leakage current and scintillation discharges were increased with increasing pollution degree. The resistance to pollution properties of silicone rubber appeared excellent among them.

• 대한소아치과학회지
• /
• 제51권2호
• /
• pp.165-175
• /
• 2024

This study aimed to investigate the effects of blood contamination on the Vickers hardness and the surface morphology of premixed MTA and compare them with the effects on conventional MTA. The Vickers microhardness of Endocem MTA Premixed Regular (EP) and ProRoot MTA (PM) was assessed after immersion in fetal bovine serum (FBS) and saline. Stem cells from human exfoliated deciduous teeth (SHED) were seeded on MTA after immersion in FBS, saline, and deionized water (DW). Cell adhesion patterns and surface morphology were visualized via scanning electron microscopy (SEM). The surface microhardness of EP and PM in FBS was lower than in saline. However, short-term exposure of PM to FBS did not reduce the microhardness compared to saline. Angular crystals formed in water, while rounded crystals with more air voids appeared in FBS. Favorable SHED attachment occurred in all groups. Overall, the surface hardness of EP and PM decreased after FBS exposure, although PM was less influenced. We suggest minimizing the amount of bleeding when using MTA clinically; nevertheless, PM remains an option with more expected blood contamination than EP. In summary, exposure to FBS decreased mechanical performance but allowed cell adhesion for both MTAs, with PM being more resistant to these changes.

• 자원환경지질
• /
• 제57권3호
• /
• pp.329-342
• /
• 2024

The exponential increase in nitrate pollution of river water poses an immediate threat to public health and the environment. This contamination is primarily due to various human activities, which include the overuse of nitrogenous fertilizers in agriculture and the discharge of nitrate-rich industrial effluents into rivers. As a result, the accurate prediction and identification of contaminated areas has become a crucial and challenging task for researchers. To solve these problems, this work leads to the prediction of nitrate contamination using machine learning approaches. This paper presents a novel approach known as Grey Wolf Optimizer (GWO) based on the Stacked Ensemble approach for predicting nitrate pollution in the Cauvery Delta region of Tamilnadu, India. The proposed method is evaluated using a Cauvery River dataset from the Tamilnadu Pollution Control Board. The proposed method shows excellent performance, achieving an accuracy of 93.31%, a precision of 93%, a sensitivity of 97.53%, a specificity of 94.28%, an F1-score of 95.23%, and an ROC score of 95%. These impressive results underline the demonstration of the proposed method in accurately predicting nitrate pollution in river water and ultimately help to make informed decisions to tackle these critical environmental problems.

• 복식문화연구
• /
• 제21권6호
• /
• pp.950-960
• /
• 2013

The purpose of this research is to provide accurate information of household washers and detergents for consumers, so that help the producers who make washing machine and detergent to get basic material and also help consumers to choose washing machine. Experiment was proceed with two type of washers to compare energy consumption, washing performance, rinsing effectiveness further, damage caused by entanglement of laundry and fabric was assessed. Detergent P and T were used to compare the performance related to differences of ingredients of detergent. Soiled fabrics of EMPA 108 set were used to evaluate performance of washing by different types of contamination. A summary of experimental results are : First, for the consumption of water, drum-type washer consumed 53% less than pulsator-type washer. On the other hand, the washing time was almost similar for both these machines, but pulsator-type washer showed shorter progress, implying that power saving was more efficient in this case. Second, the drum-type washer showed better performance for contamination with all types of detergent, but the pulsator-type washer showed better rinsing performance. Third, the drum-type washer performed less data of tangle level and fabric damage. Fourth, detergent "P" exhibited better washing performance than did detergent "T", regardless of the type of soil. And with no limit of detergent variety, water-soluble protein soil showed high removal rate, liposoluble soil especially pigment was hardly removed.

• 한국가금학회지
• /
• 제33권4호
• /
• pp.295-301
• /
• 2006

본 실험은 육계에서의 Marek's disease(MD) 백신에 대한 안전성과 효용성을 국내에 기 도입된 18일령 계란에서의 백신 접종 방법(In-Ovo vaccination)을 이용하여 평가하고자 실시하였다. 육계에서의 MD 오염율은 nested PCR을 이용하였으며 백신 접종군과 비접종군간의 생산성 차이를 출하 일령, 평균출하체중, 출하율, 사료 효율을 기본으로 하는 생산 지수를 측정하여 비교하였다. 백신에 의한 면역 억제 현상을 파악하기 위하여 접종 농장에서 채취한 혈청에서의 항체 역가수준과 F낭의 무게 변화를 검사하였다. 국내 육계에서의 MD 발생율을 파악하기 위하여 nested PCR을 실시한 결과 조사 대상 농장 중 26.09%가 오염되었으며, 백신 접종 농장과 비접종 농장간의 생산 지수의 차이는 통계학적으로 유의한 차이가 없었다. 그러나 MDV 오염군에서의 MD 백신 접종 농장의 생산 지수가 비접종 농장보다 높아 간접적으로 효과가 있음이 인정되었다. 면역 억제여부를 파악하기 위한 검사에서는 두 그룹 간 B/B ratio 차이는 없었으나 두 계군 모두 출하 시 심한 위축을 보여주어 혈청 검사 성적과 연계하여 볼 때 국내 육계 농장에서의 IBD 감염이 만연되어 있다는 것을 알 수 있었다. 본 연구를 통해서 국내 육계에서의 MDV 오염율이 파악되었으며, In-Ovo 백신 접종에 의한 MD 백신 접종은 안전성에 있어서는 별다른 문제가 없었으나 효능면에 있어서는 MD 야외감염율이 낮고 IBD와 같은 면역 억제 질병의 감염이 만연되어 있어 정확한 평가가 되지 않아 앞으로 후속 연구가 진행되어야 할 것으로 판단되었다.

• 문화기술의 융합
• /
• 제9권2호
• /
• pp.561-568
• /
• 2023

콘크리트 구조물은 대내외적 환경에 의해 다양한 결함이 발생한다. 결함이 있는 경우 콘크리트의 구조적 안전성에 문제가 있어 이를 효율적으로 파악하여 유지관리하는 것이 중요하다. 하지만, 최근 딥러닝 연구는 콘크리트의 균열에 초점이 맞추어져 있어, 박락과 오염 등에 대한 연구는 부족하다. 본 연구에서는 라벨링이 어려운 박락과 오염에 초점을 맞추어 언라벨 방법, 필터링 방법, 전이학습과 k-means cluster의 융합을 통한 4개의 모델을 개발하고 성능을 평가하였다. 분석결과, 융합모델이 결함을 가장 세밀하게 구분하였으며, 직접 라벨링을 하는 것보다 효율성을 증가시킬 수 있었다. 본 연구 결과가 향후 라벨링이 어려운 다양한 결함 유형에 대한 딥러닝 모델 개발에 기여할 수 있기를 기대한다.

• 생약학회지
• /
• 제48권1호
• /
• pp.56-62
• /
• 2017

The aim of this study was to screen the contamination by ochratoxin A of mycotoxins in various medicinal herbs. We conducted a survey of ochratoxin A in medicinal herb on the retail market in Incheon in 2016. 116 medicinal herb samples were evaluated for the ochratoxin A contamination. They were analyzed for ochratoxin A using immunoaffinity column and high-performance liquid chromatography(HPLC)-fluorescence detection and the positive samples were confirmed using HPLC-tandem mass spectrometry. Ochratoxin A was detected in 4 medicinal herb samples; the concentrations of ochratoxin A were containing between 20.11 and $372.90{\mu}g/kg$. This study shows that in general, this kind of commodity may be contaminated by mycotoxins. Also this contamination is not limited to only aflatoxin of mycotoxins.