• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVI)
• /
• pp.203-206
• /
• 2005

본 연구에서는 생물반응기에서 효율적으로 돼지 전염성 백신을 생산하기 위해 swine testicle cell을 host cell로 하는 백신 생산 시스템을 확립하였고, 이를 위한 최적 MOI, 최적 감염시기, 최적 수확시기 등 백신 생산 조건을 확립하였다. 또한 보다 안전한 백신 생산을 위해 통계적 방법에 의해 무 혈청 배지를 개발하였고 백신 생산 면에서의 가장 우수한 무 혈청 배지를 선정하였다.

• Applied Biological Chemistry
• /
• 제50권3호
• /
• pp.137-146
• /
• 2007

지구 온난화의 주 원인인 온실가스의 배출을 감소시키기 위해서 바이오연료에 대한 필요성 및 중요성이 제기되어 왔다. 이미 유럽을 중심으로 오래전부터 바이오디젤 연료에 대한 연구가 시작되어 왔으며 지금은 상용화 단계에 접어들고 있는 반면, 국내 바이오디젤 연료에 대한 연구 수준은 이제 시작단계에 불과한 실정이다. 바이오디젤 연료로 사용가능한 유지작물의 지방산 조성에 따라 자동차 엔진 성능이 저하될 수 있다는 문제가 제기되었고, 이를 해결하고자 표준화된 바이오디젤 품질 규격서가 마련되어졌다. 유럽에서 마련된 바이오디젤 규격에 의하면 올레인산 함량이 높은 기름이 바이오디젤 연료로 적합하며, 유채기름이 다른 유지작물의 기름에 비하여 바이오디젤 연료에 적합하다고 알려져 있다. 따라서 국내 유지작물의 바이오디젤 연료화를 위한 품질 개량과 생산량 증대를 위해 생명공학기술을 이용한 품종 개량에 관한 연구 전략에 대해 고찰하였다.

• 한국버섯학회지
• /
• 제16권2호
• /
• pp.61-64
• /
• 2018

This study was carried out to investigate the management characteristics and growth performance of L. edodes from the cooling stage to incubation. Bags of different heights and weights are available for bagging. When the medium size of $17{\times}13cm$ was used and the size of the inoculation hole was changed from 1/3 to 2/3, the browning period was shortened to 30 days. Mycelial growth was evaluated according to the cooling temperature after sterilization. It was observed to be the highest at 122 mm/15 days at $10^{\circ}C$ and 114 mm/15 days and 117 mm/15 days at $15^{\circ}C$ and $20^{\circ}C$, respectively. The contamination rate of the sawdust media before inoculation was measured as 0, $4.5{\times}10$, $1.3{\times}10^2$, $4.0{\times}10^3cfu$ at $5^{\circ}C$, $10^{\circ}C$, $15^{\circ}C$, and $24^{\circ}C$ respectively. The average of $1.6{\times}10^8$ colony forming units (cfu) of microorganisms was observed in the sawdust that had been piled for six months outdoors. In summer, the sawdust has to be used immediately after mixing. The sterilized medium had an average of $4{\times}10^3cfu$ of microorganisms at $24^{\circ}C$ and $1.3{\times}10^2cfu$ at $15^{\circ}C$. After 15 days of inoculation in vitro, the growth conditions of the sawdust was the best at 132 mm, followed by grain and liquid. When inoculated with liquid spawn, the moisture content of the substrate should be adjusted between 50% and 55% in advance.

• 센서학회지
• /
• 제23권4호
• /
• pp.266-271
• /
• 2014

Chemical sensors are used in various industrial facilities such high-risk and prevent the leakage of substances, important in life and environmental protection and the safe use of industry, used for management. In particular, high-temperature environments such as power generation equipment of the rotating part due to leakage generated by the various oil, power plants Shut Down, fire, work environment (exposure to various chemical solution and gas leak) and various water, air and soil pollution causes. Thus, over the long term through various channels such as crops and groundwater contamination caused by the slow, serious adverse effect on the ecosystem. In this paper, synthetic lube oil and high pressure hydraulic fluid leakage and immediately detect a new Printed Electronic implementation of technology-based film-type sensors, and its performance test. Thus, industrial accidents and environmental pollution and for early detection of problems, large accidents can be prevented. Experimental results of the synthetic lube oil and high pressure hydraulic fluid solution after the contact time depending on the experiment and the oil solution of the sensor material of the conductive porous PE resistance value by a chemical reaction could be confirmed that rapid increase. Also implemented in the film-type oil sensor electrical resistance change over time of the reaction rate and the synthetic lube oil is about 2 minutes or less, the high pressure hydraulic fluid is less than about 1 minute was. Therefore, more high-pressure hydraulic fluid such as a low volatility synthetic lube oils are the resistance change and the reaction rate was confirmed to be the slowest.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2000년도 춘계학술대회논문집
• /
• pp.59-64
• /
• 2000

능동 레이더 반사기는 지금까지는 특히 비행물체와 미사일의 레이더 유효 반사 면적을 효과적으로 증가시키기 위한 군사적 응용에만 사용이 제한되어져 왔기 때문에 그다지 친숙한 용어는 아니다. 레이더 트랜스폰더의 가장 잘 알려진 응용은 군용의 피아 식별 장치 (IFF ; Identification Friend or Foe)와 이것의 민간 항공부문이고, 항공 교통 관제(An , hir Traffic Control)를 위한 2차 감시 레이더(SSR : Second Surveillance Radar), 그리고 보다 최근에는 전 세계 해상 조난 및 안전 제도(GMDSS ; Global Maritime Distress and Safety System)의 수색 구조용 트랜스폰더(SART ; Search And Rescue Transponder)등이 있다. 최근 연안이나 대양에서의 해난사고가 빈번히 발생되고 있으므로, 이로 인한 해양오염이 심각한 실정이다. 이제는 전통적인 항해표지 및 시설로써 해상교통의 안전을 유지하기에는 충분치 못하며, 새로운 개념과 구조가 적용되어야만 한다. 따라서 본 연구에서는 개선된 구조를 가진 능동 레이더 반사기를 제안하고 제작하였다. 제작된 시스템은 기존의 시설에 비해 높은 성능 향상을 보인다.

• Molecular & Cellular Toxicology
• /
• 제4권3호
• /
• pp.246-252
• /
• 2008

Tumor tissue is usually contaminated by normal tissue components, which reduces the sensitivity of analysis for exploring genetic alterations. Although microdissection has been adopted to minimize the contamination of tumor DNA with normal cell components, there is a concern over the amount of microdissected DNA not enough to be applied to array-CGH reaction. To amplify the extracted DNA, several whole genome amplification (WGA) methods have been developed, but objective comparison of the array-CGH outputs using different types of WGA methods is still scarce. In this study, we compared the performance of non-amplified microdissected DNA and DNA amplified in 2 WGA methods such as degenerative oligonucleotide primed (DOP)-PCR, and multiple strand displacement amplification (MDA) using Phi 29 DNA polymerase. Genomic DNA was also used to make a comparison. We applied those 4 DNAs to whole genome BAC array to compare the false positive detection rate (FPDR) and sensitivity in detecting copy number alterations under the same hybridization condition. As a result microdissected DNA method showed the lowest FPDR and the highest sensitivity. Among WGA methods, DOP-PCR amplified DNA showed better sensitivity but similar FPDR to MDA-amplified method. These results demonstrate the advantage and applicability of microdissection for array-CGH analysis, and provide useful information for choosing amplification methods to study copy number alterations, especially based on precancerous and microscopically invaded lesions.

• 대한방사선기술학회지:방사선기술과학
• /
• 제41권5호
• /
• pp.437-444
• /
• 2018

Whole-Body counters have been used to evaluate the internal contamination of gamma emitting radionuclides. Among the whole-body counters used in domestic nuclear facilities, Fastscan made by CANBERRA contains 2 NaI(Tl) detectors and is generally used to monitor the primary internal exposure. It has the advantage of achieving MDA even with short time measurements. Accuscan is a bed type, and has good energy resolution because it is composed of HPGe detector. Since the Accuscan with better energy resolution than Fastscan has better able to identify radionuclides, it is used to monitor secondary internal exposure. Some nuclear facilities have only Fastscan. We analyzed statistically whether Fastscan is enough to ensure accuracy and precision comparing with Accuscan. To do this, we prepared a CRM created by the Korea Research Institute of Standards and Science. We also obtained the data of 6 Fastscans and 5 Accuscans in domestic nuclear facilities. As a result of the study, although Fastscan compared with Accuscan is not as accurate as the Accuscan, the precision is statistically same. However, accuracy of Fastscan is in compliance with international standards except low energy range. In terms of accuracy and precision except radionuclides emitting low energy, it is possible to measure radioactivity inside workers even in nuclear facilities where only Fastscan is used.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.313-313
• /
• 2013

For high-performance TFT (Thin film transistor), poly-crystalline semiconductor thin film with low resistivity and high hall carrier mobility is necessary. But, conventional SPC (Solid phase crystallization) process has disadvantages in fabrication such as long annealing time in high temperature or using very expensive Excimer laser. On the contrary, MIC (Metal-induced crystallization) process enables semiconductor thin film crystallization at lower temperature in short annealing time. But, it has been known that the poly-crystalline semiconductor thin film fabricated by MIC methods, has low hall mobility due to the residual metals after crystallization process. In this study, Ni metal was shallow implanted using PIII&D (Plasma Immersion Ion Implantation & Deposition) technique instead of depositing Ni layer to reduce the Ni contamination after annealing. In addition, the effect of external magnetic field during annealing was studied to enhance the amorphous silicon thin film crystallization process. Various thin film analytical techniques such as XRD (X-Ray Diffraction), Raman spectroscopy, and XPS (X-ray Photoelectron Spectroscopy), Hall mobility measurement system were used to investigate the structure and composition of silicon thin film samples.

• 한국농공학회논문집
• /
• 제58권6호
• /
• pp.9-21
• /
• 2016

Agricultural reservoirs in Korea have been recognized as an emerging resource for recreational and cultural activities for residents. However, most of the reservoirs are eutrophic and showing high level of contamination with nuisance algal bloom and offensive odor during the summer. For better management and restoration of the reservoirs' water quality, scientific modeling approaches could be used to diagnose the problems and evaluate the efficacy of alternative control measures. The objectives of this study were to validate the performance of a three-dimensional (3D) hydrodynamic and water quality model (Environmental Fluid Dynamics Code, EFDC) for a eutrophic agricultural reservoir and assess the effect of bypassing of the effluent from a wastewater treatment plant on the reservoir water quality. The 3D model successfully simulated the temporal variations of water temperature, DO, TOC, nitrogen and phosphorus species and Chl-a observed in 2014 and also captured their spatial heterogeneity in the reservoir. The simulation results indicated that the point source bypassing may reduce the T-N and T-P concentrations of the reservoir by 6.6 ~ 8.2 %, and 1.7 ~ 16.8 %, respectively. The bypassing, however, showed a marginal effect on the control of TOC due to the increased algal biomass associated with the increased water retention time after bypassing as well as the lower TOC level of the effluent compared to the ambient reservoir water.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권7호
• /
• pp.1135-1155
• /
• 2007

Selenium is considered to be one of the most controversial trace elements. On the one hand, it is toxic at high doses and there is a great body of information related to environmental issues of Se contamination. On the other hand, Se deficiency is a global problem related to an increased susceptibility to various diseases of animals and humans and decreased productive and reproductive performance of farm animals. Optimisation of Se nutrition of poultry and farm animals will result in increased efficiency of egg, meat and milk production and even more important, will improve quality. From the data presented in the review it is clear that the main lesson which we have to learn from nature is how to use organic selenium in animal and human diets. Selenium-enriched yeast (Sel-Plex) is the result of such a lesson and it is just a matter of time before animal nutrition moves completely from using ineffective sodium selenite to organic selenium. Other lessons from nature will follow. Recent advances in genomics and proteomics, in association with descriptions of new selenoproteins, will be a driving force in reconsidering old approaches related to Se nutrition. Probably 90% of all Se research has been conducted with sodium selenite and we now understand that the natural form of selenium is different. The main advances in Se status assessment and Se requirements were established based on the activity of glutathione peroxidase (GSH-Px), an enzyme which for many years was considered to be the main selenoprotein. Recently it was discovered that it is only one of at least 25 various selenoproteins. Se research and practical applications are developing quickly and they are very exciting and promising.