• 한국초전도ㆍ저온공학회논문지
• /
• 제20권3호
• /
• pp.11-14
• /
• 2018

$MgB_2$ superconducting properties have been investigated with the surface-treated boron powders using the chemical solvents. Various solvents were used such as acetone, ethanol, methanol, and water to possibly modify the surface condition of raw boron powders as received. This treatment was done at an argon gas environment inside the glove box to reduce the further contamination during and after chemical treatments. It was found that $T_c$ values were increased to 37.58-37.73 K from the pure sample of 37.50 K when they were treated in inert environment. High- fields $J_c$ at both 5 & 20 K was all increased regardless of any kinds of chemical treatments mentioned above. It is also noted that the $J_c$ at low-fields were increased in the order of solvents: ethanol > acetone > pure $MgB_2$ = methanol > water.

• 한국재료학회지
• /
• 제13권2호
• /
• pp.101-105
• /
• 2003

In this study, we have investigated the availability of the electroless Ni-B plating for a diffusion barrier of the bus electrode. The Ni-B layer of 1$\beta$: thick was electroless deposited on the electroplated Cu bus electrode for AC plasma display. The layer was to encapsulate Cu bus electrode to prevent from its oxidation and to serve as a diffusion barrier against Cu contamination of the transparent dielectric layer in AC plasma display. The microstructure of the as-plated barrier layer was made of an amorphous phase and the structure was converted to crystalline at about 30$0^{\circ}C$. The concentration of boron was about 5∼6 wt.% in the electroless Ni-B deposit regardless of DMAB concentration. The electroless Ni-B deposit was coated on the surface of the electroplated Cu bus electrode uniformly. And the electroless Ni-B plating was found to be an appropriate process to form the diffusion barrier.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.82-85
• /
• 1997

This paper describes the development of new type arrester for 22.9kV class distribution lines, with polymer insulating materials applied to their housings. The new arrester employs silicone insulating material for its housing, instead of the conventional porcelain housing, aiming at reduction in size and weight and explosion proof against internal short circuit failure. And, since the design of sheds is not restricted. it is possible to provide a long surface leakage distance per strike length and improve anti-contamination performance.

• E2M - 전기 전자와 첨단 소재
• /
• 제1권4호
• /
• pp.333-341
• /
• 1988

포리에틸렌, 테레프탈레트를 금속감화물로 오염시켜 열자극특성을 중심으로 가동이온의 중성화, 재이온화 및 이동의 과정등에서 이온의 거동에 관하여 검토하였다. PET가 오염이 되면 이온이 증가되고 전극금속의 영향이 있으며 고온에서 서브리니어 특성을 가지며 가동이온의 증성화 현상이 있는 것을 밝혔다. 가동이돈의 주기적 운동에 기인한 직류전기전도모델로 실험한 결과가 정성적으로 정상전류 전압 특성과 일치함이 입증되었다.

• 기술사
• /
• 제45권6호
• /
• pp.44-51
• /
• 2012

Local functional, closed the hood and exhaust are classified as open-style hood. Around the closed hood contaminants prevent the spread of contaminants. Surrounded Some pollutants (open-style hood is used in cases where the odor, vapor diffusion, and inferior) of indoor allowed to Hood expressions, which are used for kitchen, laboratory, factory canopy is typical. Contamination that occurs during cooking, kitchen ventilation barrier materials are the biggest problem, its solution by introducing fresh outside air in the kitchen troubleshoot and. Study on the kitchen exhaust airflow for my kitchen, and perform a number of each Institute and at the University of hydrodynamic analysis is investigated.

• 한국축산식품학회지
• /
• 제38권2호
• /
• pp.282-290
• /
• 2018

This research was to evaluate microbial contamination levels in meat samples at hazard analysis critical control point (HACCP)-implemented processing plants that produce beef, pork, and chicken. During a period of about a year, a total of 178 samples (76 from beef, 89 from pork, and 13 from chicken) were obtained from raw materials (21.3%) and final products (78.7%). All samples were determined for each 25 g homogenized one. Samples were analyzed to determine the total aerobic plate count (APC), coliform count (CC), and E. coli count (ECC). By month, APC levels were the highest in September and the lowest in February (p<0.001). In comparison among season, APC levels in meat samples were the highest in the summer and the lowest in winter (p<0.001). By month, the highest CC prevalence was found in August, followed by October and then July (p<0.001). By season, the highest CC was obtained in summer, followed by autumn and then spring (p<0.001). All samples were negative for ECC. There was a direct correlation between the product form and coliform presence (p<0.001). In addition, there was a positive correlation between the APC and CC (r=0.261). The APCs in analyzed samples ranged from below <$10^1CFU/g$ to <$10^7CFU/g$. In conclusion, the month and season had significant effects on microbial contamination levels at HACCP implemented processing plants. Interrelationships between (i) the product form and coliform, (ii) the APC and CC were revealed.

• 대한지하수환경학회지
• /
• 제5권3호
• /
• pp.141-147
• /
• 1998

본 연구는 괴산군 덕평리 지역의 지하수 수질과, 본 지역에 분포하는 혹색 셰일층과 탄층에 기인한 토양과 암석의 중금속 부화현상이 이 지역 지하수의 수질오염에 미치는 영향을 규명하고자 수행되었다. 본 지역의 지하수질은 지하수환경에서 일어나는 지질매체의 반응이 주로 규산염광물의 풍화인 경우와 탄산염광물의 풍화인 경우로 크게 구분된다. 규산염광물의 풍화가 주된 반응인 시료들은 음이온의 주성분이 SO$_4$$^{2－}$ 인 시료들과 Cl$^{-}$ 인 시료들로 세분가능하며, 이러한 수질특성은 지하수와 접하는 암석의 풍화특성에 관계되는 것으로 사료된다. 암석과 토양내 부화된 중금속에 의한 천부 지하수의 오염현상은 국내외의 먹는 물 수질기준에 비교하였을 때 발견되지 않았으나, 국지적으로는 산성폐수의 생성과 지하수환경으로의 유입이 발견되었다. 또한 질산성-질소에 의하여 수질기준의 2~3배에 달하는 오염이 밝혀졌으며, 오염원은 생활하수 내지 비료성분의 지하수내 유입으로 사료된다.

• 자원환경지질
• /
• 제29권3호
• /
• pp.305-313
• /
• 1996

In order to investigate the extent and degree of Cd, Cu, Pb and Zn contamination affected by mining activities of the Dalsung Cu~W mine, sampling of stream sediments and waters has been undertaken up to 1.5 km downstream from the mine at 50~150 meter intervals. Analysis of the samples was carried out using ICP-AES for Cd, Cu, Pb and Zn. Physical and chemical properties of sediments (pH, organic matter contents, cation exchange capacity) and waters (pH, Eh and temperature) were also measured. The properties of the sediment samples were characterized by low pH (3.0~5.5), low organic matter contents (2~5%) and a moderate degree of cation exchange capacity (7~15 meq/100 g) with a high proportion of sand fraction. The pH values of water samples ranged from 3.0 to 5.0 and the Eh levels were in the range of 350~530 mV. Concentrations of Cd, Cu, Pb and Zn in the sediments averaged 3.2 mg/kg, 1,390 mg/kg, 451 mg/kg and 262 mg/kg with the range of 0.6~11.4 mg/kg, 15~3,800 mg/kg, 14~1,330 mg/kg and 63~1,060 mg/kg, respectively. Significant levels of the heavy metals were also found in the water samples with the range of $10{\sim}170{\mu}gCd/l$, $300{\sim}41,600{\mu}gCu/l$, $10{\sim}80{\mu}gPb/l$ and $700{\sim}15,400{\mu}gZn/l$. These elevated concentrations in the sediments and waters may be caused by the weathering of mine waste materials and their high solubilities under acidic and/or oxidizing conditions. Although metal concentrations in the samples decrease with the distance from the mine, heavy metal contamination of sediments and waters were also found at the 1.5 km downstream due to the mobile conditions of the heavy metals, with particular reference to Cd and Zn in stream waters.

• Journal of Radiation Protection and Research
• /
• 제43권2호
• /
• pp.39-49
• /
• 2018

Background: A model to assess the activity concentration of agricultural products and the public ingestion dose as result of a nuclear accident is necessarily required to manage the contaminated agricultural systems by the accident, or to estimate the effects of chronic exposure due to food ingestion at a Level 3 PSA. Materials and Methods: A dynamic compartment model, which is composed of three sub-modules, namely, an agricultural plant contamination assessment model, an animal product contamination assessment model, and an ingestion dose assessment model has been developed based on Korean farming characteristics such as the growth characteristics of rice and stockbreeding. Results and Discussion: The application study showed that the present model can predict well the characteristics of the activity concentration for agricultural products and ingestion dose depending on the deposition date. Conclusion: The present model is very useful to predict the radioactivity concentration of agricultural foodstuffs and public ingestion dose as consequence of a nuclear accident. Consequently, it is expected to be used effectively as a module for the ingestion dose calculation of the Korean agricultural contamination management system as well as the Level 3 PSA code, which is currently being developed.

• Restorative Dentistry and Endodontics
• /
• 제40권4호
• /
• pp.299-305
• /
• 2015

Objectives: The purpose of this study was to investigate the effectiveness of multiple decontamination procedures for salivary contamination after curing of a universal adhesive on dentin bond strength according to its etch modes. Materials and Methods: Forty-two extracted bovine incisors were trimmed by exposing the labial dentin surfaces and embedded in cylindrical molds. A universal adhesive (All-Bond Universal, Bisco) was used. The teeth were randomly divided into groups according to etch mode and decontamination procedure. The adhesive was applied according to the manufacturer's instructions for a given etch mode. With the exception of the control groups, the cured adhesive was contaminated with saliva for 20 sec. In the self-etch group, the teeth were divided into three groups: control, decontamination with rinsing and drying, and decontamination with rinsing, drying, and adhesive. In the etch-and-rinse group, the teeth were divided into four groups: control, decontamination with rinsing and drying, decontamination with rinsing, drying, and adhesive, and decontamination with rinsing, drying, re-etching, and reapplication of adhesive. A composite resin (Filtek Z350XT, 3M ESPE) was used for filling and was cured on the treated surfaces. Shear bond strength was measured, and failure modes were evaluated. The data were subjected to one-way analysis of variation and Tukey's HSD test. Results: The etch-and-rinse subgroup that was decontaminated by rinse, drying, re-etching, and reapplication of adhesive showed a significantly higher bond strength. Conclusions: When salivary contamination occurs after curing of the universal adhesive, additional etching improves the bond strength to dentin.