• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.9
• /
• pp.464-469
• /
• 2004

The leakage current of transmission insulators contaminated with salt, clay, and kaolin was examined in the Gochang's Long Periods Testing Center. The Insulators were artificially contaminated and estimated with the method of equivalent salt deposit density(ESDD). The artificially contaminated insulators were installed with the same condition as in the real transmission power line and applied with 154 (kV). The leakage current of the artificially contaminated insulators was measured with environment conditions, such as temperature and humidity by the a automatic leakage current detecting system. The leakage current of heavily contaminated insulator was abruptly increased above 72［%］ of humidity, even though the leakage current was similar between the contaminated and non-contaminated insulators below 72［%］ of humidity. Also, it was found that the humidity was much more important than the temperature in the leakage current of transmission insulators. The leakage current of contaminated insulator was decreased when it was plenty of rainfall, resulting from natural washing.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.4
• /
• pp.10-19
• /
• 2016

Land contamination has emerged as a major environmental and land management issue over the last decade. Although the importance of contaminated land management was continuously increased and many developed countries tried to make advanced contaminated land register system, current Korea soil regulations and policies have not been considered yet. This study analyzed existing or developing contaminated land register system from various countries to suggest implications of environmental decision support. Through this study, the introduction of contaminated land management system as creating a new system in Korea needs to considerable review to the following in order to achieve the objective through a effective adoption and operation (1) we need to establish contaminated land register system by providing a proper legal basis before the imposition of data collection, investigation, and management, (2) sufficient examination is required to identify scope of information disclosure and criteria, contents, and subjects of items from contaminated land register system.

• Analytical Science and Technology
• /
• v.32 no.3
• /
• pp.105-112
• /
• 2019

Fingerprints may be contaminated with ethanol solutions. In order to solve the case, the law enforcement agency may need to visualize the fingerprint from these samples, but the development method has not been studied. The paper with latent fingerprint was contaminated with ethanol solution and then the blurring of ridge detail was observed. As a result, when the copy paper was contaminated with ethanol solutions of less than 75 % (v/v), the amino acid components of latent fingerprint residue blurred but lipid components of latent fingerprint residue didn't blurred. On the other hand, when the paper was contaminated with ethanol solution of more than 80 % (v/v), the amino acid components of latent fingerprint didn't blurred but the lipid components of latent fingerprint blurred. Therefore, it is found that the paper contaminated with ethanol solutions of less than 75 % (v/v) should be treated by oil red O (ORO) enhancing lipid components, and the paper contaminated with ethanol solutions of 80 % (v/v) or more should be treated by 1,2-indandione/zinc (1,2-IND/Zn) enhancing amino acid components. The blurring of ridge detail was not observed when the fingerprints were deposited with fingers contaminated with ethanol solution. This fingerprints were treated with 1,2-IND/Zn or ORO to compare the latent fingerprint development ability, and using 1,2-IND/Zn was able to visualize the latent fingerprint more clearly than using ORO.

• Fire Science and Engineering
• /
• v.21 no.3
• /
• pp.97-103
• /
• 2007

This experimental study showed the tracking characteristics of contaminated insulating materials. To analysis tracking characteristics, IEC 60112 was used. As the results of this study, the tracking characteristics of contaminated insulating materials showed as followings: (a) Comparative tracking index (CTI) of contaminated insulating material was lower than non-contaminated one. (b) First carbonized growth time and track growth time of contaminated insulating materials was faster than non-contaminated.

• Proceedings of the KACD Conference
• /
• 2001.11a
• /
• pp.577-577
• /
• 2001

The lastest concepts in bonding are "total etch", in which both enamel and dentin are etched with an acid to remove the smear layers, and "wet dentin" in which the dentin is not blown dry but left moist before application of the bonding primer. Ideally, the application of a bonding agent to tooth structure should be insensitive to minor contamination from oral fluids. Clinically contaminations such as saliva, gingival fluid, blood and handpiece lubricant are often encountered by dentists during preparation of a restoration. The aim of this study was to evaluate the effect of contamination by hem-ostatic agents on shear bond strength of compomer restorations. One hundred and ten extracted human maxillary and mandibular molar teeth were collected. The teeth were cleaned from soft tissue remnant and debris and stored in physiologic solution until they were used. Small flat area on dentin of the buccal surface were wet ground serially with 400, 800 and 1200 abrasive paper on automatic polishing machine. The teeth were randomly divided into 11 groups. Each group was conditioned as follows: Group 1 : Dentin surface was not etched and not contaminated by hemostatic agents. Group2 : Dentin surface was not etched but was contaminated by Astringedent (Ultradent product Inc., Utah, U.S.A.). Group3 : Dentin surface was not etched but was contaminated by Bosmin (Jeil Phann, Korea.). Group4 : Dentin surface was not etched but was contaminated by Epri-dent (Epr Industries, NJ, U.S.A.). Group5: Dentin surface was etched and not contaminated by hemostatic agents. Group 6 : Dentin surface was etched and contaminated by Astringedent. Group7 : Dentin surface was etched and contaminated by Bosmin. Group8 : Dentin surface was etched and contaminated by Epri-dent. Group9 : Dentin surface was contaminated by Astringedent. The contaminated surface was rinsed by water and dried by compressed air. Group10 : Dentin surface was contaminated by Bosmin. The contaminated surface was rinsed by water aud dried by compresfed air. Group 11 : Dentin surface was contaminated by Epri-dent. The contaminated surface was rinsed by water and dried by compresfed air. After surface conditioning, F2000 was applicated on the conditoned dentin surface. The teeth were thermocycled in distilled water at $5^{\circ}C\;and\;55^{\circ}C$ for 1000 cycles. The samples were placed on the binder with the bonded compomer-dentin interface parallel to the lmife-edge shearing rod of the Universal testing machine(Zwick 020, Germany) running at a cross head speed of 1.0mmimin. There were no significant differences in shear bond strength between groups 1 and group 3 and 4, but group 2 showed significant decrease in shear bond strength compared with group 1. There were no significant differences in shear bond strength between group 5 and group 7 and 8, but group 6 showed significant decrease in shear bond strength compared with group 5. There were no significant differences in shear bond strength between group 5 and group 9, 10 and 11.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.7
• /
• pp.990-994
• /
• 2004

Effects of addition of a mycotoxin detoxifier in poultry feed were studied in broilers. Aflatoxins were present in the poultry feed as 28 ppb (normal feed), 78 ppb (contaminated feed) and 170 ppb (highly contaminated feed). The mycotoxin detoxifier was used in 3 concentrations i.e. 1, 3 and 5 kg/ton of feed. Aflatoxins reduced the body weight in broiler chicken and treatment of contaminated feed with low level of detoxifier improved the body weight equivalent to that of normal feed. Higher level of detoxifier proved better than lower level addition in alleviating the effects of highly contaminated feed. Addition of detoxifier also resulted in improvement of FCR to the level of normal feed. Antibody levels against Newcastle disease virus on day 28 of age were significantly lower in chicken fed on contaminated feed. Addition of detoxifier in feed improved the antibody levels in chicken. Mortality was highest in groups given contaminated feed throughout the study period of 7 weeks. Significant mortality was also observed in groups given highly contaminated feed for 2 weeks. Mortality in chicken given detoxifier added contaminated feed was lowest and similar to the group given normal feed. The study shows that mycotoxin detoxifier containing oxyquinol, dichloro-thymol and micronized yeast can effectively neutralize the ill-effects of aflatoxins in poultry feed.

• Restorative Dentistry and Endodontics
• /
• v.21 no.2
• /
• pp.585-601
• /
• 1996

The purpose of this study was to elucidate the effect of blood-and saliva-contamination during dentin pretreatment procedure on tensile bond strength, and to investigate the effect of contaminant-removing treatments on the recovery of bond strength of dentin bonding agents. Dentin specimens prepared from freshly extracted bovine mandibular anterior teeth were divided into non-contaminated control and contaminated experimental groups. The specimens of the contaminated group were contaminated with saliva or blood after etching or priming procedure, followed by contaminant-removing treatments. All the specimens were bonded with All Bond$^{(R)}$ 2 dentin bonding agent and Bisfil$^{TM}$ composite resin or Scotchbond$^{TM}$ Multipurpose and Z100. After all the bonded specimens were stored in $37^{\circ}C$ distilled water for 24 hours, tensile bond strengths were measured. The contaminated dentin and fractured dentin surfaces were examined under the scanning electron microscope. The results were as follows : Contaminated specimens showed lower bond strength than non-contaminated ones regardless of the kind of contaminant, contamination time and contaminant-removing treatments, except specimens which were acid-etched following saliva contamination after etching in All Bond$^{(R)}$ 2 groups (p<0.05). Blood contaminant resulted in much bond strength decrease than saliva ones (p<0.01), and contamination after priming resulted in much decrease in bond strength than after etching (p<0.01). Re-etching resulted in increase of bond strength in the specimens contaminated with saliva after etching but not in blood contaminated ones. Re-priming resulted in increase of bond strength in the specimens contaminated after priming regardless of the kind of contaminant.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.2
• /
• pp.294-304
• /
• 2020

Objective: The study was conducted to evaluate the effects of the absorbent (a mixture of activated carbon and hydrated sodium calcium aluminosilicate) on growth performance, blood profiles and hepatic genes expression in broilers fed diets naturally contaminated with aflatoxin. Methods: A total of 1,200 one-day-old male chicks were randomly assigned to 6 treatments with 10 replicate cages per treatment. The dietary treatments were as follows: i) control (basal diets); ii) 50% contaminated corn; iii) 100% contaminated corn; iv) control+1% adsorbent; v) 50% contaminated corn+1% absorbent; vi) 100% contaminated corn+1% absorbent. Results: During d 1 to 21, feeding contaminated diets reduced (p<0.05) body weight (BW), average daily gain (ADG), and average daily feed intake (ADFI), but increased (p<0.05) feed-to-gain ratio (F/G). The absorbent supplementation increased (p<0.05) BW, ADG, and ADFI. There were interactions (p<0.05) in BW, ADG, and ADFI between contaminated corn and absorbent. Overall, birds fed 100% contaminated diets had lower (p<0.05) final BW and ADG, but higher (p<0.05) F/G compared to those fed control diets. The absorbent addition increased (p<0.05) serum albumin concentration on d 14 and 28 and total protein (TP) level on d 28, decreased (p<0.05) alanine transaminase activity on d 14 and activities of aspartate aminotransferase and alkaline phosphatase on d 28. Feeding contaminated diets reduced (p<0.05) hepatic TP content on d 28 and 42. The contaminated diets upregulated (p<0.05) expression of interleukin-6, catalase (CAT), and superoxide dismutase (SOD), but downregulated (p<0.05) glutathione S-transferase (GST) expression in liver. The absorbent supplementation increased (p<0.05) interleukin-1β, CAT, SOD, cytochrome P450 1A1 and GST expression in liver. There were interactions (p<0.05) in the expression of hepatic CAT, SOD, and GST between contaminated corn and absorbent. Conclusion: The results suggest that the naturally aflatoxin-contaminated corn depressed growth performance, while the adsorbent could partially attenuate the adverse effects of aflatoxin on growth performance, blood profiles and hepatic genes expression in broilers.

• Proceedings of KOSOMES biannual meeting
• /
• 2003.05a
• /
• pp.205-209
• /
• 2003

The various pretreatment processes were evaluated for removal of oil pollutants with weathered oil contaminated seawater in a reverse osmosis desalination process. Weathered oil contaminated seawater was made by biodegradation and photooxidation with oil containing seawater. Coagulation, ultrafiltration, advanced oxidation processes and granular activated carbon filtration was used with pretreatment for dissolved organic carbon. Crude oil was removed but. weathered oil contaminated seawater was not removed by biodegradation and coagulation. DOC and E260 was removed with about 20 % and 40 % by membrane filter of cut off molecular weight 500. So, the most of dissolved organic carbon in weathered oil contaminated seawater was revealed that molecular weight was lower than 500. It is difficult to remove DOC in weathered oil contaminated seawater by advanced oxidation processes treatment, but, E260 was removed more high. However, DOC in weathered oil contaminated seawater was easily adsorbed to GAC. It is revealed that DOC was removed by adsorption.

• Journal of Environmental Science International
• /
• v.18 no.4
• /
• pp.473-478
• /
• 2009

The removal characteristics of total petroleum hydrocarbons (TPHs) and heavy metals in contaminated soils with ultrasonic washing have been studied. The ultrasonic washing was evaluated on a laboratory scale. In this investigation, the effects of factors such as ultrasonic frequency, power intensity, duration of irradiation, contents of the TPHs and heavy metals and mixing ratios between the contaminated soils and water, were considered. Experimental results suggested that the rates for contaminant extraction of the TPHs and heavy metals in the contaminated soil increased considerably with the ultrasonic washing. Therefore, the ultrasonic washing has previously been to be an effective method to remediate the contaminated soils with the TPHs and heavy metals.