• Journal of Navigation and Port Research
• /
• v.27 no.4
• /
• pp.397-402
• /
• 2003

Generally, container arrangement has been carried out based on the Classification guidelines. However, guidelines provide only container securing forces for the given container arrangement and Classification requirements of the forces. In order to design container arrangement additional information is needed such as container securing forces and arrangement that accounts for lashing bridges, vertical lashing, vertical center of gravity (VCG), and maximum stack weight. Trial and error method using the existing guidelines requires excessive amount of calculation time and cannot provide accurate results of the calculations. In order to fulfill this need, a new container securing system has been established based on the equilibrium conditions that include lashing bridges and vertical lashing. An optimization algorithm has been developed for the new system since current optimization methods such as genetic algorithms and evolution strategies are unsuitable for the container securing problems, which involve equality constraint. Design variables are container weights of tier and objective function is either total container weight or VCG of a stack. The newly developed system provides optimum arrangement of containers for both maximum stack weight and maximum VCG. It also greatly reduces time for designing container arrangement.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.181-186
• /
• 2005

A ship runs with various modes of motion due to waves. Among the modes, roll mainly influences on the safety of cargos on the deck of container ship. In order to protect cargo shifting and turning, securing and lashing system are generally installed. In that case, it is necessary that the force and moment at the connection point of containers should be estimated. Therefore we derived mathematical equations to calculate the forces of securing points and lashing wires. Also we calculated those forces and moments about various lashing patterns.

• Journal of Navigation and Port Research
• /
• v.29 no.5 s.101
• /
• pp.377-382
• /
• 2005

A ship runs with various modes of motion due to waves. Among the modes, roll mainly influences on the safety of cargos on the deck of container ship. In order to protect cargo shifting and turning, securing and lashing system are generally installed. In that case, it is necessary that the force and moment at the connection point of containers should be estimated. Therefore we derived mathematical equations to calculate the forces of securing points and lashing wires. Also we calculated those forces and moments about various lashing patterns.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.2
• /
• pp.79-88
• /
• 2022

Recently, securing stable supply of fresh food is deemed as one of the important tasks. Accordingly, now the presence of cold chain along with the needs of a comfortable and healthy life is growing as the online market expands and the contactless industry grows, however, cold chain is being studied only in the aspect of ground and sea transportation. And, due to global warming and strengthening global environmental regulations, we believe that it is necessary to convert the existing road-centered logistics system into a railway-centered logistics system, a low-carbon transportation means. Therefore, in this paper we calculated the maximum energy required by the reefer container as a basic research necessary for constructing the low temperature distribution and cold chain based on the reefer container railway, and conducted a study on methods of supplying the reefer container power utilizing 1. tramline, 2. battery, 3. generator. The results of this paper can be utilized as a foundational study for building a cold chain based on a reefer container dedicated to freight trains in the future.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.2
• /
• pp.162-169
• /
• 2016

A new concept of membrane type LNG CCS was proposed. Also, its static behavior was numerically analyzed considering the interaction between primary and secondary barrier together with securing device. Hull deflection was taken into account as an external load, together with temperature distribution across the barriers. The suggested numerical model considers both sliding and contact between the two mating surfaces of both the primary and secondary barrier, and anisotropic material behavior of plywood, R-PUF was also taken into account. Furthermore, detailed local strength was evaluated for the securing device, which is arranged between two barriers to hold the primary barrier. It was confirmed through the numerical analysis that the new concept of membrane type CCS was structurally safe under static loading condition and securing concept was structurally reliable.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1125-1132
• /
• 2023

The importance of networks is gradually expanding in the battlefield environment. As time goes by, the types of tactical data links used in the Korean JTDLS are increasing, and the military's weapon systems equipped with tactical data link systems are increasing. Thorough quality verification is required to provide stable software to the wider battlefield. This study examines how to prepare an environment in which various simulation tests to verify the stability of the Korean JTDLS project can be conducted as diverse as possible using minimal physical space and Hardware resources. Through this, it is possible to improve the completeness of the project and secure the stability of the program, and it is intended to contribute to securing higher stability and reliability by securing maximum test capabilities in a limited test environment even in Linux based system project of a similar environment.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.4
• /
• pp.11-16
• /
• 2011

Information of freight tracking and tracing is one of core elements in logistics point of view. We can monitor the vehicle or vessel where freights are loaded and get the in-transit data via GPS. However, security problem exists after the shipments are unloaded. RFID is well utilized for securing the container which products are stuffed into. International standard organization sets relevant specification and e-seal appears to be at issue. The paper investigates current status of corresponding technology and proposes the policy for development of logistics industry.

• Journal of Navigation and Port Research
• /
• v.40 no.6
• /
• pp.459-468
• /
• 2016

The decreasing number of import and export containers is causing a problem with container circulation. In particular, this problem has reached a serious level in the Gyeongin area. Empty containers are accumulating in the Gyeongin container yard, where most of the returned containers are stored. In order to improve the empty container return problem at Gyeonhin, this study analyzes the actual situation and the empty container return process. A preference survey was conducted to suggest solutions from the perspective of users rather than shippers. A logistics company's data was analyzed to identify the inefficient cost structure in the Gyeongin area. The results show that the empty container return problem in Gyeongin is becoming more and more serious. To solve this problem, this paper proposes reestablishing functions at the Incheon Port, and securing a third new storage terminal in the Gyeongin area. Finally, an efficient empty container circulation system is presented. It will also be necessary to prepare laws and institutions to ensure these solutions.

• Journal of Korea Port Economic Association
• /
• v.23 no.4
• /
• pp.71-90
• /
• 2007

To induce container cargos to Gunsan port, we should struggle on securing the quantity of goods transported from the competitive Jeonbuk and Chungcheong areas by reducing transportation expenses by land, and make an activating plan for the international exchange between Gunsan port and nearby ports in China. As a result, if the plan to induce container cargos to Gunsan port is activated, the regular liners will stop at Gusan port. So the new sea route will be opened so that consignors can ship cargos in the proper time. The consignors will use Gunsan port frequently because of the reduction of distribution expenses. To do so, for the first, many incentives should be implemented to attract container cargos. In addition, various facilities should be fully equipped and improved. This paper is to improve the problems for which consignors, the shipping lines and forwarders may feel uncomfortable when they use Gunsan port. According to the research on the actual condition, the biggest problem in Gunsan port is the depth of water. The management, relation system, infrastructure and information system of Gunsan port are also insufficient. Therefore, this paper will make an alternative plan to improve these problems and help the container cargos induce to Gunsan port.

• Journal of Navigation and Port Research
• /
• v.47 no.6
• /
• pp.437-447
• /
• 2023

By actively adopting technologies from the Fourth Industrial Revolution, the port industry is trending toward new types of ports, such as automated and smart ports. However, behind the development of these ports, there is an increasing risk of cyber security incidents and threats within ports and container terminals, including information leakage through cargo handling equipment and ransomware attacks leading to disruptions in terminal operations. Despite the necessity of research to enhance cyber security within ports, there is a lack of such studies in the domestic context. This study focuses on Busan Port, a representative port in South Korea that actively incorporates technology from the Fourth Industrial Revolution, in order to discover variables for improving cyber security in container terminals. The research results categorized factors for enhancing cyber security in Busan Port's container terminals into network construction and policy support, standardization of education and personnel training, and legal and regulatory factors. Subsequently, multiple regression analysis was conducted based on these factors, leading to the identification of detailed factors for securing and enhancing safety, reliability, performance, and satisfaction in Busan Port's container terminals. The significance of this study lies in providing direction for enhancing cyber security in Busan Port's container terminals and addressing the increasing incidents of cyber security attacks within ports and container terminals.