• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권1호
• /
• pp.16-22
• /
• 2002

The Proposed contactless charger employs a Pair of neighboring Printed circuit board (PCB) windings as a contactless energy transfer device, thereby making it amenable to low-Profile designs and suitable for applications to the portable telecommunication/computing electroncis in which stringent requirements for height, space, and reliability have to be met. The performance of the proposed charger is confirmed with experiments on a prototype charger developed for cellular phones

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.634-637
• /
• 2001

The proposed contactless charger employs a pair of neighboring printed circuit board windings as a contactless energy transfer device, thereby making it amenable to low-profile designs and suitable for applications to the portable telecommunication/computing electronics in which stringent requirements for height, space, and reliability have to be met. The performance of the proposed charger is confirmed with experiments on a prototype charger developed for cellular phones.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.678-681
• /
• 2000

Contactless battery charger with a "더" type core is proposed in this paper. The proposed take-apart transformer maintain a high coupling coefficient in spite of air gap. The ZV-ZCS method is used for the efficiency and stable opeation of the system.he system.

• Journal of Power Electronics
• /
• 제16권1호
• /
• pp.102-110
• /
• 2016

Contactless power transfer technology is gaining increasing attention in city transportation applications because of its high mobility and flexibility in charging and its commensurate power level with conductive power transfer method. In this study, an inductively coupled contactless charging system for a 48 V light electric vehicle is proposed. Although this study does not focus on system efficiency, the generic problems in an inductively coupled contactless power transfer system without ferromagnetic structure are discussed. An active load matching method is also proposed to control the power transfer on the receiving side through a load matching converter. Small signal modeling and linear control technology are applied to the load matching converter for port voltage regulation, which effectively controls the power flow into the load. A prototype is built, and experiments are conducted to reveal the intrinsic characteristics of a series-series resonant inductive power charger in terms of frequency, air gap length, power flow control, coil misalignment, and efficiency issues.

• 전력전자학회논문지
• /
• 제8권5호
• /
• pp.407-417
• /
• 2003

비접촉식 충전기에 사용되는 변압기는 비교적 큰 공극으로 인해 낮은 결합계수를 가지므로 전력전달 능력이 떨어진다. ㄷ ㅓ 형 코어로 비접촉식 충전기용 변압기를 만들면 표준형의 EE, EC, UU 코어로 만든 변압기에 비해 높은 결합계수를 얻을 수 있다. 본 논문에서는 ㄷ ㅓ 형 코어로 만든 변압기의 특성을 연구하였다. 누설 인덕턴스와 여자 인덕턴스가 미치는 영향을 정현파 구동이나 구형파 구동을 통하여 분석하였고 코어에 따른 전력 전달 특성을 비교하였다. 분석의 타당함을 확인하기 위하여 ZVS 변환기에 삽입하여 그 동작을 확인하였다. 본 논문에 사용된 분석과 비교하는 방법은 공극이 큰 PCB 변압기 등에도 적용할 수 있다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권4호
• /
• pp.265-271
• /
• 2000

A non-contact battery charger for cellular phone is designed using half-bridge series resonant converter. This converter utilizes series resonance to reduce the undesirable effect of large leakage inductance of the detachable transformer and ZVS operation can reduce switching loss and switching noise. In this paper, analysis and design procedure of half-bridge series resonant converter with detachable transformer is presented. The input voltage is 85VAC∼270VAC, and the output voltage and current is 4.1V and 800mA, respectively. Furthermore, a method of calculating the secondary current of the transformer to control the battery charging current in the constant current charging mode is proposed. The performance of the charger is verified through experiments.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.258-261
• /
• 2000

A non-contact battery charger which transfers energy using magnetic field has a difficulty with a feed-back control due to the interaction between the power and signal processing This paper proposes an effective method which uses auxiliary windings of transformer as signal path and copes with cross-talk using the MOSFET ringing phenomenon and ceramic filter. The power stage is half-bridge series resonant converter. Design procedure and experimental verification are presented.

• 한국정보통신학회논문지
• /
• 제14권3호
• /
• pp.678-683
• /
• 2010

일반적으로 무선(비접촉식) 충전 장치는 Ferrosilicon 혹은 Ferrite 와 같은 코어를 사용하여 충전 효율을 높이고 있다. 본 논문에서는 무선충전 장치에 있어서 투자율이 더 높은 Permalloy를 이용하여 비접촉방식 충전 효율을 극대화한 무선 전력송신 기술을 제안한다. 기존의 Ferrosilicon 혹은 Ferrite 코어 재료보다 Permalloy를 이용할 경우 높은 효율의 투자율을 얻을 수 있으며 기존 비접촉식 충전 기술과의 비교 실험을 통해 더 높은 충전 효율과 무선 충전 거리를 확보할 수 있었다. 본 연구에서 개발된 무선 전력송신 기술은 향후 소형 휴대용 충전기기에 유용하게 적용 할 수 있을 것이다.