• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.178-182
• /
• 1991

Contact resistance and contact leakage current of the $Al/TiSi_2/Si$ system are investigated for $N^+\;and\;P^+$ junctions. Titanium disilicide is one of the most common silicides because of its thermal stability, ability, to form selective formation and low resistivity. In this paper, the effect of RTA temperature and Junction implant dose are characterized. The $TiSi_2$ contact resistance to $N^+$ silicon is lower than that of Al to $N^+$ silicon, but $TiSi_2$ of contact resistance to $P^+$ silicon is higher than that of Al to $P^+$ silicon. The $TiSi_2$ of contact leakage current to $N^+\;and\;P^+$ silicon is similar to that of Al contact.

• Structural Engineering and Mechanics
• /
• v.48 no.2
• /
• pp.241-255
• /
• 2013

The receding contact problem for two elastic layers whose elastic constants and heights are different supported by two elastic quarter planes is considered. The lower layer is supported by two elastic quarter planes and the upper elastic layer is subjected to symmetrical distributed load whose heights are 2a on its top surface. It is assumed that the contact between all surfaces is frictionless and the effect of gravity force is neglected. The problem is formulated and solved by using Theory of Elasticity and Integral Transform Technique. The problem is reduced to a system of singular integral equations in which contact pressures are the unknown functions by using integral transform technique and boundary conditions of the problem. Stresses and displacements are expressed depending on the contact pressures using Fourier and Mellin formula technique. The singular integral equation is solved numerically by using Gauss-Jacobi integration formulation. Numerical results are obtained for various dimensionless quantities for the contact pressures and the contact areas are presented in graphics and tables.

• Tribology and Lubricants
• /
• v.10 no.3
• /
• pp.71-77
• /
• 1994

Rolling friction test was carried out to investigate the effect of the wear amount on rolling contact fatigue process in lubrication oil. The methods of this process were conducted at two Hertzian contact pressure and three slide ratio in each case by employing normalized and annealed carbon steel. During process of the rolling contact fatigue, the number of rotation until surface damage was occurred, the wear amount of rolling contact surface, and residual stress and half-value breadth using X-ray reflection on rolling contact surface were investigated. The result of this study shows that rolling contact fatigue process was directly influenced by wear trend and was confirmed by change of residual stress and half-value breadth on rolling contact surface.

• Progress in Superconductivity and Cryogenics
• /
• v.15 no.2
• /
• pp.48-51
• /
• 2013

The thermal contact resistance (TCR) is one of the important components in the cryogenic systems. Especially, cryogenic measurement devices using a cryocooler can be affected by TCR because the systems have to consist of several metal components in contact with each other for heat transferring to the specimen without cryogen. Therefore, accurate measurement and understanding of TCR is necessary for the design of cryogenic measurement device using a cryocooler. The TCR occurs at the interface between metals and it can be affected by variable factors, such as roughness of metal surface, contact area and contact pressure. In this study, we designed TCR measurement system at various temperatures using a cryocooler as a heat sink and used steady state method to measure the TCR between metals. The copper is selected as a specimen in the experiment because it is widely used as a heat transfer medium in the cryogenic measurement devices. The TCR between Cu and Cu is measured for various temperatures and contact pressures. The effect of the interfacial materials on the TCR is also investigated.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.948-949
• /
• 2008

In this paper, an effect on power conversion unit in next generation high-speed train by loss of contact between a contact wire and pantograph supplied electrical power to high-speed train are investigated. One of the most important needs accompanied by increasing the speed of high-speed train is reduced that arc phenomenon by loss of contact brings out EMI. To analysis of conducted EMI source on powering mode of next generation high-speed train, it is necessary electrical modeling system between the contact wire and the pantograph according with loss of contact. Therefore analytical model of a contact wire and a pantograph is constructed to simulate the behaviour of loss of contact. The reliability of the modeling system is verified by simulation implementation on loss of contact.

• PNF and Movement
• /
• v.8 no.2
• /
• pp.9-15
• /
• 2010

Purpose : This study aimed to investigate the effect of differing ground contact conditions on the eletromyographic(EMG) activity in rectus femoris, biceps femoris, tibialis anterior, gastrocnemius medialis during step-up activity in patients with hemiparesis. Methods : 10 hemiparetic patients performed step-up activity on three different ground contact conditions: entire ground contact, 2/3 ground contact, 1/3 groud contact. Result : The EMG activities of gastrocnemius medialis significantly changed on 1/3 ground contact(p<.05). However, no significant changed rectus femoris, biceps femoris, tibialis anterior between three differing ground contact conditions (p>.05). Conclusion : This study provides that EMG activities of gastrocnemius medialis significantly changed on different ground contacts. Therefore, this method can be used to strengthen the gastrocnemius medialis.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.15-21
• /
• 2003

Generally, subway runs under the ground, so it uses rigid contact wire. Pantograph and contact wire, they have effect on the contact force each other. This paper is on the dynamic interaction of a pantograph and rigid contact wire system. For this we developed simulation program of current collecting capability for dynamic interaction for pantograph and rigid contact wire. As a result, we got contact force and displacement between pantograph and rigid contact wire. This paper shows the possibility of better pantograph's suspension design and better maintaining of current collecting capability than present when suspention of pantograph is developed by theoretic result.

• Transactions of Materials Processing
• /
• v.14 no.6 s.78
• /
• pp.547-552
• /
• 2005

In general, the sheet metal and die are described by finite elements for the simulation of the metal forming processes. Because the characteristics as continuum of the sheet metal are represented with triangles and rectangles, the errors occur inevitably in finite element analysis. Many contact schemes to describe the deformation modes exactly have been introduced in order to decrease these errors. In this study, a scheme for continuous contact treatment is proposed in order to consider the realistic behavior of contact phenomena during the forming process. The discrete mesh causes stepwise propagation of contact nodes of the sheet even though the contact region of the real forming process is altered very smoothly. It gives rise to convergence problem in case that the process, for example bending process, is sensitive to the contact between the sheet and the tools. The analysis of the unconstrained cylindrical bending process without blank holder is also presented in order to investigate the effect of the proposed algorithm.

• Journal of the Korean Society of Food Culture
• /
• v.25 no.3
• /
• pp.312-323
• /
• 2010

The objective of this study was to examine the effects of relationships between food service companies and their client companies by surveying employees working at cafeterias among a food service companies' client companies. For this purpose, previous research was reviewed, and confirmatory research was conducted using a questionnaire. In the questionnaire survey, the subjects were sampled through convenience sampling from the client companies of A Food Service Company, and 182 valid questionnaires were used in the analysis. The results of this study are summarized as follows. First, the characteristics of the relationship between the food service company and its client companies, which were reputation, communication, operation skill, and contact-point employees' service quality, had a significant effect on trust, and the effect was high in the order of contact-point employees' service quality, communication, operation skill, and reputation. Satisfaction was significantly affected by reputation, operation skill, and contact-point employee' service quality, but not by communication. The effect was high in the order of contact-point employees' service quality, reputation, and operation skill. In addition, reputation, communication, operation skill, and contact-point employees' service quality had a significant effect on long-term orientation, and the effects were high in the order of reputation, contact-point employees' service quality, communication, and operation skill. Second, with regard to the quality of relationships between a food service company and its client companies, trust had a significant effect on satisfaction. Third, among the factors related to the quality of relationships between the food service company and its client companies, trust and satisfaction had a significant effect on long-term orientation, and the effect of satisfaction was higher than that of trust. This study has scientific significance as one of only a few studies on factors affecting the long-term relationship between food service companies and their client companies, along with managerial implications that contact-point employees' capabilities are most important in service businesses, and thus efforts should be made at employing and educating them properly.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.11
• /
• pp.1083-1092
• /
• 2007

The objective of the present paper is to evaluate the effect of the evolution of contact surface profile caused by fretting wear on fatigue life of press-fitted shaft by means of an analytical method based on experimental data. A finite element analysis was performed to analyze the stress states of press-fitted shaft, considering the worn contact profiles of shaft. The fatigue lives of the press-fitted shaft reflecting the evolution of contact stress induced by fretting wear were evaluated by stress-life approach using fatigue notch factor. It is found that the stress concentration of contact edge in press-fitted shaft decreases rapidly at the initial stage of total fatigue life, and its location shifts from the contact edge to the inside with increasing number of fatigue cycles. Thus the change of crack nucleation position in press-fitted shaft is mainly caused by the stress change of contact edge due to the evolution of contact surface profile by fretting wear. Furthermore, the estimated fatigue lives by stress-life approach at the end of running-in period of the fretting wear process corresponded well to the experimental results. It is thus suggested that the effect of fretting wear on fatigue life in press fits is strongly related to the evolution of surface profile at the initial stage of total fatigue life.