• Journal of Sensor Science and Technology
• /
• v.9 no.3
• /
• pp.224-232
• /
• 2000

Aluminum metal process in surface micromachining enables to fabricate Al electrodes or Al structures, which improve electrical characteristics by reducing contact- and line-resistance or makes the whole process to be simple by using oxide as sacrificial layer. However, it is not possible to use conventional sacrificial layer etching process, because HF solution attacks aluminum as well as sacrificial oxide. The mixed solution of BHF and glycerine as an alternative shows the adequate properties to meet with this end. The exact etching properties, however, are sensitively depends on the geometry of the released structure, because the most etching process of sacrificial layer proceeds to the lateral direction in narrow space. Also, the surface roughness of aluminum affects to the etching characteristics. This paper reports experimental results on the effect of microstructure and surface roughness of aluminum to the etching properties. Considering these effects, we propose the optimized etching condition, which can be used practically for the fabrication of aluminum electrodes and microstructures by using standard surface micromachining process without modification or additional process.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.12 s.148
• /
• pp.1546-1553
• /
• 2005

The wetting behavior and liquid transport of nonionic surfactant solutions; Span 20 and Tween 20, 40, 60, 80, 21, 61, 81, 65 & 85: in polyethylene terephthalate(PET) fabrics are reported. Five different PET fabrics are used in this study. PET 1, 2 & 3 have different compactness in structure. PET 4 & 5 have similar physical properties to PET 2, however, PET 4 has heat set finish and PET 5 with rewetting agent. The wetting and water retention properties of PET fabrics are greatly improved by addition of nonionic surfactants. The aqueous liquid retention(W) vs. cosq and W vs. adhesion tension has positive linear relationship. Hydrophilic surfactants which have short hydrophobes and surfactants with unsaturated hydrophobe structures are more efffctive in improving the wetting properties of PET fabrics. PET fabric which has larger thread spacing shows greater value of water retention ratio(W/H) than PET fabric with smaller thread spacing if there are no surfactants present in the system, however, W/H values become very similar among these PET fabrics when the surfactants are added. If there are no surfactants present in the system, PET with heat set finish has smaller value and PET with rewetting agent has greater value of W/H than PET without finish even though the fabrics have the similar physical properties.

• Archives of Plastic Surgery
• /
• v.37 no.5
• /
• pp.509-518
• /
• 2010

Purpose: Major drawbacks of conventional bone marrow stromal cells (BSCs) transplantation method are mainly caused by direct transplanted cell to host cell interactions. We hypothesized that separation of the transplanted cells by a microporous membrane might inhibit most of the potential adverse effects and induce superior effect. The purpose of the study is to determine the optimal condition of the microporous membrane. Methods: First, BSCs were placed in polyethylene terephthalate (PET) transwell inserts with 3, 8, or $12{\mu}m$ pore size, and cultured in 24 well culture plates. After 5 days, bottoms of the plates were observed for presence of attached BSCs in monolayer and cell numbers were evaluated. Second, BSCs were placed PET, polycarbonate (PCT), and mixed cellulose esters (MCE) transwell inserts with 3 and $8{\mu}m$ pore size, and cultured in 24 well culture plates. After 3 days, the supernatants of the media left in culture plate were analyzed for collagen, vascular endothelial growth factor (VEGF), platelet derived growth factor BB (PDGF-BB), and basic fibroblast growth factor (bFGF). Third, BSCs were placed in 15% and 70% of the PET membrane with $3{\mu}m$ pore size. All the experimental conditions and methods were same as the second study. Results: The optimal pore sizes to prevent BSC leakage were $3{\mu}m$ and $8{\mu}m$. The amounts of type I collagen and three growth factors tested did not show significant differences among PET, PCT, and MCE groups. However, the collagen, VEGF, and bFGF levels were much higher in the high (70%) density group than in the low (15%) density group. Conclusion: This study revealed that the optimal pore size of membrane to prevent direct BSC to recipient cell contact is in between $3{\mu}m$ and $8{\mu}m$. Membrane materials and pore sizes do not influence the collagen and growth factor passage through the membrane. The most striking factor for collagen and growth factor transport is pore density of the membrane.

• Korean Journal of Materials Research
• /
• v.17 no.1
• /
• pp.31-36
• /
• 2007

Nanoimprint lithography (NIL) is a new lithographic method that offers a sub-10nm feature size, high throughput, and low cost. One of the most serious problems of NIL is the stiction between mold and resist. The antistiction layer coating is very effective to prevent this stiction and ensure the successful NIL results. In this paper, an antistiction layer was deposited by VSAM (vapor self assembly monolayer) method on silicon samples with FOTS (perfluoroctyltrichlorosilane) as a precursor for making an antistiction layer. A specially designed LPCVD (low pressure chemical vapor deposition) was used for this experiment. All experiments were achieved after removing the humidity. First, the evaporation test of FOTS was performed for checking the evaporation temperature at low pressure. FOTS was evaporated at 5 Tow and $110^{\circ}C$. In order to evaluate the temperature effect on antistiction layer, chamber temperature was changed from 50 to $170^{\circ}C$ with 0.1ml of FOTS for 1 minute. Good hydrophobicity of all samples was shown at about $110^{\circ}$ of contact angle and under $20^{\circ}$ of hysteresis. The surface energies of all samples calculated by Lewis acid/base theory was shown to be about 15mN/m. The deposited thicknesses of all samples measured by ellipsometry were almost 1nm that was similar value of the calculated molecular length. The surface roughness of all samples was not changed after deposition but the friction force showed relatively high values and deviations deposited at under $110^{\circ}$. Also the white circles were founded in LFM images under $110^{\circ}$. High friction forces were guessed based on this irregular deposition. The optimized VSAM process for FOTS was achieved at $170^{\circ}C$, 5 Torr for 1 hour. The hot embossing process with 4 inch Si mold was successfully achieved after VSAM deposition.

• Polymer(Korea)
• /
• v.34 no.3
• /
• pp.191-197
• /
• 2010

To improve the curing method of anisotropic conductive film (ACF) at low temperature, it was studied to replace the thermal latent curing agent of imidazole compounds by the curing agent of cationically initiating type. Thermo-mechanical properties such as glass transition temperature, storage modulus, and coefficient of thermal expansion were investigated for the analysis of curing behavior. The reliability of ACF were observed in thermal cycle and high temperature-high humidity test. ACF using cationic initiator showed faster curing, lower CTE, and higher $T_g$ than the case of using imidazole curing agent, which is important for the high temperature stability. Furthermore, ACF using cationic initiator maintained a stable contact resistance in reliability test, although it was cured at low temperature and fast rate. With these results, it was confirmed that the curing method of epoxy had great effect on thermo-mechanical properties and reliability of ACF.

• Korean Journal of Oriental Medicine
• /
• v.16 no.3
• /
• pp.67-75
• /
• 2010

Objectives : In order to study the standardization of Qi-gong, and the important spread of education in Qi-gong, we investigated to the cognition of Qi-gong. Method : The descriptive investigation was accomplished to examine the level about the standardization of Qi-gong and the propensity with the Qi-gong training specialist, Qi-gong experience people and non-experience people on a national scale. The data of 572 question papers (140 specialists, 132 Qi-gong experience people, 300 non experience people) were analyzed. The period of the data collection was from Jun, 1, 2009 to Jun, 30, 2009. Result : The motives of Qi-gong participation were Qi-gong training and the individual health. The merit of Qi-gong was beneficial to health. The difficulties of Qi-gong training were the serial motion and doing training alone. And in order to popularize Qi-gong, the motion must simple and the spread of Qi-gong need. The reason of non-participation was the deficiency of the contact opportunity and the reason of participation was beneficial to health. In the future, the national policy for the activation of Qi-gong was the spread of the national exercise through the standardization of Qi-gong. Qi-gong was used in the side of the prevention and the principle of Qi-gong need the modern reinterpretation. And the effect of Qi-gong was more effective in musculoskeletal disease and the valuable part of Qi-gong was the health-longevity. Conclusion : With this, in order to develop the value of Qi-gong, the national support policy will be necessary. And the standardization of Qi-gong motion and program, the development of easy exercise, the educational prevalance, and publicity campaign will be necessary.

• Journal of the Korean earth science society
• /
• v.35 no.1
• /
• pp.29-40
• /
• 2014

A DC resistivity survey was performed to detect anomalies beneath concrete pavement. A set of high conductive media and planar electrodes were used to lessen the effect's a high contact resistance of concrete. Results of the resistivity survey were analyzed and compared with those of other geophysical surveys such as Ground Penetration Radar (GPR), Impulse Response (IR), and Multi-channel Analysis of Surface Waves (MASW), which were carried out in the same location. The results of resistivity survey showed a high resistive distribution in the section of sink and pavement where a pattern of reinforcement was observed through the GPR survey. Also, a comparison of results between the IR and resistivity surveys indicated that the high resistivity was produced by the high dynamic stiffness in the reinforced section. The co-Kriging of both the results of DC resistivity and MASW surveys at the same location showed that an integrated geostatistical analysis is able to give more accurate description on the anomalous subsurface region than can a separate analysis of each geophysical approach. This study suggests that the integrated geostatistical approaches were used for a decision-making process based on the geophysical surveys.

• Korean Institute of Interior Design Journal
• /
• v.20 no.3
• /
• pp.172-181
• /
• 2011

Many of penthouse apartments began to be built and distributed in Korea from the 2000s. However, we have a transformed definition from the international concept of penthouse. It seems that the penthouse apartments in Korea have a confined definition as a luxury and privileged house-we often find it out from advertisements of newly built apartments. In this thesis, therefore, it needs to make a clear and substantial definition of penthouse. And on the base of this definition, this study is intended to analyze planes of penthouse apartments which are distributed recently. It is in order to find out positive aspects of penthouse apartments and to make practical application of this analysis. The process of this study for plane-planning is as follows. Firstly, it is investigated and analyzed that external factors that have an effect on plane-planning such as locations and types of penthouse apartments. Secondly, an interior of penthouse apartments are divided into a private, public and outward area. And properties of each area through this research show the way of division and arrangement of plane. Thirdly, methods of connection between spaces is analyzed on the base of results of research for the way of partition. Finally, specific characters of penthouse apartments planning is derived from synthesis of research. In conclusion, analysis of plane-planning of penthouse apartments is summarized as follows. The majority of penthouse apartments is arranged to small portions of households and on higher stories in apartment which is situated around Han River or public parks. These external factors influence the plane-planning in both the interior and exterior way. For the exterior planning in space, it becomes important to design bays as many as possible in contact with outside in order to satisfy demands for fine prospects. It is also important to plan extra places naturally such as a terrace in order to provide virtual grounding. In the interior planning, a large size of interior induces to develop space for linking between each area, such as corridors or extra rooms. This makes it possible that the private area is linked to each other, at the same time it has its own distinctiveness according to its usage.

• Journal of Conservation Science
• /
• v.30 no.2
• /
• pp.123-136
• /
• 2014

Considering that decision in conservation treatment for damaged objects should consider not only various options of methodology of intervention but also possible consequences of different types of intervention, it is a difficult task to decide and propose clear and safest solution of preserving an object. In addition, it should be constantly challenged by conservators even if it is proved technique or methodology in a past treatment. Therefore, there is no absolute solution which can be applied to all practice but each decision can be different case by case. It is not possible to estimate the way how the present condition of material and environmental aspects would affect to the condition of an object in future. However if conservators keep trying to set out various ways of analysing pro and against effect of past treatments, it would be able to provide useful logics of proving efficiency and appropriateness of a certain treatment. Understanding that the advantage of laser technique is to adopt a way of cleaning an object without making a direct contact, which is different from other techniques, this paper aims at securing stability of laser techniques, although it remains a limitation in the compatibility to all other materials. This study has examined reacting process on the painted pigments against laser beam by using CLSM in order for it to display both the problems from such reacting process and the efficiency of it as a cleaning methodology. It has intended to estimate the result of laser techniques and propose the range of applicability.

• Journal of Applied Biological Chemistry
• /
• v.60 no.2
• /
• pp.137-140
• /
• 2017

Agricultural pests, diamondback moth (Plutella xylostella), green peach aphid (Myzus persicae) and two-spotted spider mite (Teyranychus urticae), are becoming major pests in human dwellings in a variety of ways across the world. For management of these pests, the essential oils of Coriandrum sativum and Cinnamomum cassia prepared by steam distillation, hexane extraction and supercritical extraction methods were evaluated for the insecticidal effects. Using the contact bioassay, the $LD_{50}$ value of C. sativum oil by steam distillation extraction method was $30.59{\mu}g/cm^2$ against M. persicae adults. The $LD_{50}$ values of C. cassia oils prepared by steam distillation and hexane extraction methods were 5.96 and $4.64{\mu}g/cm^2$, respectively, against T. urticae adults, and $LD_{50}$ value of the essential oil by supercritical extraction method was $6.50{\mu}g/cm^2$ against M. persicae adults. This study showed that C. sativum and C. cassia oils could be an effective natural acaricide and insecticide against agricultural pests.