• Korean Journal of Veterinary Research
• /
• v.46 no.3
• /
• pp.279-284
• /
• 2006

Photo-catalytic products have been widely used at home and hospital to prevent bacteria, virus and fungus. Activities of anti-bacteria, anti-viruses and anti-fungi are based upon direct contact of crystals and particles of titanium dioxide with pathogens, into which titanium is catalyzed by photo. Those antimicrobial activities of the photo-catalytic titanium dioxide have been proved in vitro. However, in vivo tests of those activities have not been carried out on dog skin. Aim of this study was to evaluate the antimicrobial activities of the catalytic titanium dioxide in vivo. Ten beagle dogs were divided into two groups. One group was sprayed with 10ml of titanium dioxide(1 mg/ml) whereas the other was not. The treated dogs were exposed under the sunlight for 120 min. A set of three hairs was taken 15, 30, 60 and 120 min after the exposure and the bacteria contaminated in hairs were amplified in, Muller Hilton broth at $35^{\circ}C{\pm}1$ for 3 h. The supernatant of the bacterial culture was diluted 1 : 10 in phosphafe-buffered saline. One milliliter of the diluents was transferred into triphenyltetrazolium medium(TTC) and incubated at $35^{\circ}C{\pm}1$ for 2 days. The number of bacteria was counted. The number of bacteria colonies was decreased compared to control group. To further investigate the longevity effect of titanium dioxide, the dogs were kept in indoor without sun light for 6 and 12 h, 1, 2, 3, 7, 14 days after exposure of the chemical during each 15, 30, 60 min. The number of bacteria colony in 1ml was counted. The number of bacterial colonies was decreased. Treated group is exposured by sun light during 15 min, the longevity effect of titanium dioxide is continued by 1 week. Treated group is exposured by sun light during 30, 60 min, the longevity effect of titanium dioxide is continued over 2 weeks. These data indicated that the photo-catalytic titanium dioxide may be used for prevent bacteria on dog skin.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.2
• /
• pp.97-106
• /
• 2021

The issue of controlling police corruption is very important that in terms of public services where police administration is in direct contact with citizens. In this study, individual, organizational, cultural, and legislative factors are classified as independent factor variables that contribute to police corruption, and the effect of these corruption factors on the level of police corruption, and the role of occupational identity and organizational citizenship behavior of police offices in this relationship are analyzed. A survey is conducted on the public citizens for empirical analysis of this study. The results of the empirical analysis are as follows: First, organizational, cultural factors and legal-legislative factors have negative influence on the occupational identity. Second, legislative factors has negative influence on organizational citizenship behavior. Third, organizational, cultural and legislative factors have positive effects on police corruption. Finally, in terms of the effect of corruption factors on organizational citizenship behavior through occupational identity, organizational, cultural and legal-legislative factors had negative mediating effect on it.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.4
• /
• pp.15-29
• /
• 2021

Urban green spaces offer a variety of benefits to living things and humans. However, existing green spaces have been reduced and fragmented due to urbanization, and there is a limit to creating new large green spaces in densely developed cities. Street trees have fewer restrictions on land use, which can be a measure to secure green areas in cities. In Korea, excessive pruning is being done on some street trees for reasons such as blocking of building signboards, contact with electric wires, and restrictions on sidewalk widths. Therefore, it is necessary to quantitatively understand the relationship between the benefits provided by street trees and their structures to come up with an efficient and systematic planning and management plan for urban street trees. In this study, we quantitatively analyzed the relationship between the thermal comfort improvement by the shades of street trees and the vertical structure, planting environment, and types of street trees. To calculate the thermal comfort felt by human body, we calculated UTCI (Universal Thermal Climate Index) of each street tree. For the vertical structure of street trees, we used Terrestrial LiDAR and the point clouds of street tree's crown was sliced vertically at 1m intervals. We conducted a multiple regression analysis on the thermal comfort improvement using the variables we obtained from fields. As a result, in the case of a street tree's vertical structure, the lager the volume of tree's crown located 3-4m (β=0.298, p<.05) and 6-7m (β=0.568, p<.001) above clear length, the better the cooling effect. In addition, the thermal comfort improvement was assessed to decrease as the DBH increased (β=-0.435, p<.001). In general, the crown diameter and DBH are positively correlated, with a cooling effect occurring as crown diameter increases. In this study, the opposite result was obtained due to the small number of trees measured, so additional research is needed by increasing the number of tree samples. In the case of the planting environment, the effect of improving thermal comfort was higher in the shaded area of trees planted to the south (β=-0.541, p<.001). Since unsystematic management of street trees can deteriorate the function of them, quantitative evaluations of the vertical structure of street trees are required, which can provide specific measures for planning and management of urban street trees with thermal comfort effect.

• Management & Information Systems Review
• /
• v.39 no.2
• /
• pp.95-112
• /
• 2020

This study intends to identify the main triggers of consumer participation behavior by multi-dimensionally reviewing factors affecting active participation behavior in order for consumers to receive better service at service encounter. We also want to review the impact of service contact employees' human services on consumers' experience of positive and negative emotions while performing participation behavior. This study targeted beauty salon services. Beauty salon services are one of the most important industries for human services because of the relatively long time interaction and the high degree of consumer participation that has a great influence on service outcomes. For an empirical analysis survey was conducted on 446 general consumers. SPSS and AMOS analysis was performed. The results of this study are as follows. First, relational benefits were not significant for consumer participation behavior, and functional benefits and hedonic benefits were significant. Consumer participation behavior was found to have a significant effect on positive emotions, but not on negative emotions. It has been shown that the service provider's human service has a significant effect on both positive and negative emotions. Finally, both positive and negative emotions were found to have a significant effect on service quality. Since beauty services are an industry with high social visibility, it has been shown that relational benefits does not significantly affect consumer participation. Negative emotions perceived by consumers did not significantly affect service quality. It may mean that some negative emotions are insignificant. Further studies will need to classify the negative emotion dimension more closely. It is necessary to review the feelings arising from service employees. Finally, it is necessary to review the various types of services of contact employees.

• Journal of the Korean Electrochemical Society
• /
• v.23 no.2
• /
• pp.47-55
• /
• 2020

Highly loaded LiCoO₂ positive electrodes are prepared to construct high-energy density lithium-ion batteries, their electrochemical performances are evaluated. For the standard electrode, a loading of about 2.2 mAh/㎠ is used, and for a high-loading electrode, an electrode is manufactured with a loading level of about 4.4 mAh/㎠. The content of carbon black as electronic conducting additive, and the porosity of the electrode are configured differently to compare the effects of electron conduction and ionic conduction in the highly loaded LiCoO₂ electrode. It is expected that the electrochemical performance is improved as the amount of the carbon black increases, but the specific capacity of the LiCoO₂ electrode containing 7.5 weight% carbon black is rather reduced. When the conductive material is excessively provided, an increase of electrode thickness by the low content of the LiCoO₂ active material in the same loading level of the electrode is predicted as a cause of polarization growth. When the electrode porosity increases, the path of ionic transport can be extended, but the electron conduction within the electrode is disadvantageous because the contact between the active material and the carbon black particles decreases. As the electrode porosity is lowered through the sufficient calendaring of the electrode, the electrochemical performance is improved because of the better contact between particles in the electrode and the reduced electrode thickness. In the electrode design for the high-loading, it is very important to construct the path of electron conduction as well as the ion transfer and to reduce the electrode thickness.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.320-320
• /
• 2016

Nanocrystalline Carbon thin films have numerous applications in different areas such as mechanical, biotechnology and optoelectronic devices due to attractive properties like high excellent hardness, low friction coefficient, good chemical inertness, low surface roughness, non-toxic and biocompatibility. In this work, we studied the comparison of pure DC power and pulsed DC power in plasma sputtering process of carbon thin films synthesis. Using a close field unbalanced magnetron sputtering system, films were deposited on glass and Si wafer substrates by varying the power density and pulsed DC frequency variations. The plasma characteristics has been studied using the I-V discharge characteristics and optical emission spectroscopy. The films properties were studied using Raman spectroscopy, Hall effect measurement, contact angle measurement. Through the Raman results, ID/IG ratio was found to be increased by increasing either of DC power density and pulsed DC frequency. Film deposition rate, measured by Alpha step measurement, increased with increasing DC power density and decreased with pulsed DC frequency. The electrical resistivity results show that the resistivity increased with increasing DC power density and pulsed DC frequency. The film surface energy was estimated using the calculated values of contact angle of DI water and di-iodo-methane. Our results exhibit a tailoring of surface energies from 52.69 to $55.42mJ/m^2$ by controlling the plasma parameters.

• Composites Research
• /
• v.18 no.6
• /
• pp.9-18
• /
• 2005

With the wide applications of fiber-reinforced composite material in aero-structures and mechanical parts, the design of composite joints have become a very important research area because the joints are often the weakest areas in composite structures. This paper presents an analytical study of the stress distributions in mechanically single-fastened and multi-fastened composite laminates. The finite element models which treat the pin and hole contact problem using a contact stress analysis are described. A dimensionless stress concentration factor is used to compare the stress distributions in composite laminates quantitatively In the case of single-pin loaded composite laminate, the effects of stacking sequence, the ratio of a hole diameter and the width of a laminate (W/D ratio), the ratio of hole diameter and distance from edge to hole (E/D ratio), friction coefficient and clamping force are considered. In the case of multi-pin loaded composite laminate, the influence of the number of pins, pitch distance, number of rows, row spacing and hole pattern are considered. The results show that P/D ratio and E/D ratio affect more on stress distributions near the hole boundary than the other factors. In the case of multi-pin loaded composite laminate, the stress concentration in the double column case is better than the other cases of multi-pin loaded composite laminate.

• Journal of Korean Ophthalmic Optics Society
• /
• v.12 no.3
• /
• pp.19-25
• /
• 2007

It was studied how using soft contact lens multi-purpose solution (MPS), often used for medical treatment, effects the inhibition on cell growth, and how using the MPS demages eye cells, on rabbit eye's corneal epithelium and endothelium tissue. $ReNu^{(R)}$ (Baush & Lomb, USA), Opti-free $express^{(R)}$ (Alcon, USA), Free-sol $plus^{(R)}$ (Hanamedicon, Korea) were used as MPS. After culturing Clone 1-5C-4 cell lines (Human conjunctival cell lines), cell growth inhibition rate was measured by MIT assay. By making Hematoxylin and Eosin stain specimen, the morphology was observed by optical microscope. In the In vivo experiment, 9 white rabbit eyes (18 eyes) were classified into 3 groups. The experiment group is left eyes (9 eyes) of rabbit, and MPS were dropped; however the control group, the right eyes (9 eyes), were only used a saline solution without a preservatives. After the dropping within the period, the cornea surface of rabbit endothelium tissue was observed using scanning electron microscopy (SEM).

• Journal of the Korean Institute of Gas
• /
• v.21 no.5
• /
• pp.1-8
• /
• 2017

Currently gas safety management in the industrial field has been done by LDAR as contact method or methane leak detector as non-contact method. But LDAR method requires a lot of man-power and methane leak detector have the limitation of methane only. Therefore the Research on the OGI(optical gas image) has big attention by industry. This research was undertaken to see the effect of background temperature difference of gas cloud on the clarity of OGI. The background temperature control panel was constructed to cool down the background temperature. OGI was taken at the various methane gas ejection rate and the designed temperature difference. The experimental results showed that the OGI(when the temperature difference is $-6^{\circ}C$) is more clear thane the OGI(when the temperature difference is zero). To quantify the clarity difference, MATLAB's RGB analysis method was employed. The RGB value of the OGI at ${\Delta}T-6^{\circ}C$ was 20% lower than the OGI at ${\Delta}T0^{\circ}C$. The clarity difference by T difference can be explained by the total radiation law. When the background temperature of the gas is lower than the air temperature, the radiation energy coming into the OGI lens is increasing. As the energy is increasing, the OGI image becomes clear.

• Microbiology and Biotechnology Letters
• /
• v.44 no.3
• /
• pp.383-390
• /
• 2016

Mesenchymal stem cells (MSCs) are multipotent stem cells that can be differentiated into a variety of cell types, including adipocytes, osteoblasts, chondrocytes, β-pancreatic islet cells, and neuronal cells. MSCs have been reported to exhibit immunomodulatory effects in many diseases. Many studies have reported that MSCs have distinct roles in modulating inflammatory and immune responses by releasing bioactive molecules. Exosomes are cell-derived vesicles present in biological fluids, including the blood, urine, and cultured medium of cell cultures. In this study, we investigated the immunomodulatory effects of mouse adipose tissue-derived MSCs (mAD-MSCs), cultured medium (MSC-CM) of mAD-MSCs, and mAD-MSC-derived exosomes (MSC-Exo) on lipopolysaccharide (LPS)-induced RAW 264.7 cells. We observed that the expression levels of IL-1β, TNF-α, and IL-10 were significantly increased in LPS-stimulated RAW 264.7 cells compared to those in LPS-unstimulated RAW 264.7 cells. Additionally, these values were significantly (p < 0.05) decreased in mAD-MSCs-RAW 264.7 cell co-culture groups, MSC-CM-treated groups, and MSC-Exo-treated groups. MSCs can modulate the immune system in part by secreting cytokines and growth factors. We observed that immunomodulatory factors such as IL-1β, TNF-α, and IL-10 were secreted by mAD-MSCs under co-culturing conditions of mAD-MSCs with activated RAW 264.7 cells. In addition, mAD-MSC-derived exosomes exhibited similar immunomodulatory effects in activated RAW 264.7 cells. Therefore, our results suggest that mAD-MSCs have an immunomodulatory function through indirect contact.