• Journal of Environmental Science International
• /
• v.21 no.5
• /
• pp.573-578
• /
• 2012

In this study, adsorption of polychlorinated biphenyls(PCBs) in transformer oil on powder activated carbon (PAC) and synthetic zeolite was evaluated. Adsorption characteristics of PCBs on the PAC and zeolite has been investigated in a batch system with respect to adsorbents amount and contact time. BET results showed 908 m2/g for PAC and 483 m2/g for zeolite. The adsorption capacity of PCBs increased with an increasing input amount of absorbent. The adsorption experimental results showed that PAC removed 90% of input PCBs in transformer oil while zeolite removed only 64%. Adsorption of PCBs to PAC and zeolite fit the Freundlich model well. The Freundlich parameter, Kf, for PAC and zeolite was 193.1 and 43.0 respectively, indicating that PAC is effect adsorbent for PCBs adsorption in transformer oil.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.538-543
• /
• 2008

A roller with a shaft and hot oil paths for pressing electrodes of polymer batteries were modeled and analyzed by FEM. There are many hot oil tubes in the roller and shaft, through which $72^{\circ}C$ hot oil flows for heating the surface of a roller and shaft. Thermal deformations and temperatures distributions of the roller and shaft were calculated and a convection boundary condition on surfaces was used. The influence of existence of a groove in the shaft on the flatness of a roller surface caused by thermal deformation was investigated. In addition, the amount of spring-back of electrodes under vacuum pressure and heating was calculated after the hot rolling process. It was shown from this study that the groove in one shaft had a favorable effect on the surface flatness.

• Food Industry And Nutrition
• /
• v.12 no.2
• /
• pp.44-50
• /
• 2007

양파(노란색, 붉은색, 흰색)의 열수 추출물이 DNCB로 감작된 4주령 BALB/c mouse 암컷에 유도된 접촉성 피부염의 억제효과를 조사하였다. 림프절, 비장 및 흉선의 무게는 양파 투여군이 DNCB 대조군보다는 낮게 나타났다. 양파 추출물을 투여한 군에서 귀의 무게는 양파 추출물의 농도가 높을수록 감소하는 경향을 보였으며, 대조군과 비교하여 무게에 함량 변화가 있었다. 양파추출물을 1,000 mg/kg 농도로 투여하면 귀의 무게는 대조군과 유사한 수준까지 낮아졌으며, 귀의 두께는 양파추출물을 투여한 군에서 시간이 경과할수록 두께가 감소하는 경향을 나타내었다. MDA 함량은 DNCB대조군과 양파 투여군을 비교하였을 경우에, 간 조직에서 차이가 나타나지 않았으나, 염증이 발생한 귀 조직에서는 차이가 나타났으며, NO 함량은 모든 양파그룹에서 염증이 억제되어 대조군에 유사하게 측정되었다.

• Journal of information and communication convergence engineering
• /
• v.13 no.4
• /
• pp.257-263
• /
• 2015

In this study, organic field-effect transistors (OFETs) using a copper phthalocyanine (CuPc) material as an active layer and SiO₂ as a gate insulator were fabricated with varying active layer thicknesses and channel lengths. Further, using a thermal evaporation method in a high-vacuum system, we fabricated a CuPc FET device of the top-contact type and used Au materials for the source and drain electrodes. In order to discuss the channel formation and FET characteristics, we observed the typical current-voltage characteristics and calculated the threshold voltage of the CuPc FET device. We also found that the capacitance reached approximately 97 pF at a negative applied voltage and increased upon the accumulation of carriers at the interface of the metal and the CuPc material. We observed the typical behavior of a FET when used as an n-channel FET. Moreover, we calculated the threshold voltage to be about 15-20 V at V_DS = -80 V.

• Journal of Mechanical Science and Technology
• /
• v.14 no.10
• /
• pp.1072-1080
• /
• 2000

Leakage magnetic flux (LMF) is widely used for non-contact detection of cracks. The combination of optics and LMF offers advantages such as real time inspection, elimination of electrical noise, high spatial resolution, etc. This paper describes a new nondestructive evaluation method based on an original magneto-optical inspection system, which uses a magneto-optical sensor, LMF, and an improved magnetization method. The improved magnetization method has the following characteristics: high observation sensitivity, independence of the crack orientation, and precise transcription of the geometry of a complex crack. The use of vertical magnetization enables the visualization of the length and width of a crack. The inspection system provides the images of the crack, and shows a possibility for the computation of its depth.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.199-204
• /
• 2003

In the present study, the compression process in scroll compressor was simulated in consideration of flow leakage and heat transfer. Tangential and radial leakages of the refrigerant between the scrolls were considered as nozzle flow. The experiment was first conducted with a scroll compressor for automobile air conditioning system and R134a as a refrigerant. Temperature and pressure were measured at the suction and discharge ports of the compressor to determine the thermodynamic states of the refrigerant flow. Temperature distribution of the scroll with the involute angle was also measured by thermocouples that were installed inside the scroll. Measured temperature distribution was compared with the numerical results. From this result, the thermal effect of mechanical contact was found to be important in heat transfer of the compression process.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.273-273
• /
• 2010

Recently, extensive research on hetero-junction arrays has been reported owing to its unique band gaps dissimilar to that of homo-junctions. These hetero-junction devices can be used in laser, solar cells, and various sensors. We report on the facile method to fabricate SWCNTs/SnO2 nanowires hetero-junction arrays on flexible polyimide substrate. Each SWCNT field effect transistor (FET) and SnO2 nanowire FET exhibits the purely p- and n-type charactersistics with ohmic contact properties. Such formed pn-junctions showed rectification behaviors reproducibly with a rectification ratio of ${\sim}3{\times}103$ at 1 V and ideality factors about 12. The pn-junctions also showed a good gate modulation behavior.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.71-71
• /
• 2010

Copper oxide thin films were deposited on the p-type Si(100) by r.f. magnetron sputtering as a function of different substrate temperature. The deposited copper oxide thin films were investigated by atomic force microscopy (AFM), scanning electron microscopy (SEM), spectroscopic ellipsometry (SE), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The SEM and SE data show that the thickness of the copper oxide films was about 170 nm. AFM images show that the surface roughness of copper oxide films was increased with increasing substrate temperature. As the substrate temperature increased, monoclinic CuO (111) peak appeared and the crystal size decreased while the monoclinic CuO (-111) peak was independent on the substrate temperature. The oxidation states of Cu 2p and O 1s resulted from XPS were not affected on the substrate temperature. The contact angle measurement was also studied and indicated that the surface of copper oxide thin films deposited high temperature has more hydrophobic surface than that of deposited at low temperature.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.287.2-287.2
• /
• 2014

PV (photovoltaic) has becoming an important industry to invest due to its high robustness and require very little maintenance which goes a long time. Solar cell fabrication involves a few critical processes such as doping to make the N-type and P-type silicon, contact metallization, surface texturization, and anti-reflection coatings. Anti-reflection coating is a kind of surface passivation which ensures the stability, and efficiency of the solar cell. Thus, I will focus on the changes happen to the solar cell due to the reflectance and anti-reflection coating by PC1D. By using the PC1D (solar cell simulation program), I would analysis the effect of reflectance on the N-type cell. At last I will conclude the result regarding what I learned throughout this experiment.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1996.11a
• /
• pp.171-173
• /
• 1996

Ag coating on the textured YBCO was prepared by means of a Ag$_2$O brushed coating method. The contact between Ag coating and textured YBCO was examined by sharp knife cut and by the observation of SEM. The critical current densities of different textured YBCO samples, which included YBCO with and without Ag coating, and YBCO with Ag coating after hot moist text, were compared. The Ag coating does not influence the oxygen absorption of textured YBCO, but Ag coating can protect YBCO well from moisture and $CO_2$