• Journal of Korean Ophthalmic Optics Society
• /
• v.4 no.2
• /
• pp.81-86
• /
• 1999

Human corneal epithelial cells and mouse fibroblast L929 cells were grown to 60-70% confluency in 96 well plates. 24 hours after the well plates are inoculated, the medium on the test plates is aspirated and replaced with an extract supplemented medium prepared from the materials to be tested. The contact lenses manufactured by 7 companies were collected from optical shops and used for this study. The exactracts having been prepared by autoclaving 8 lenses in 2.5ml saline. The cell monolayer is then cultured for a further 48 hour period. MTT and SRB assys were performed for cytotoxic effect on cultured cells An inhibition of 30% is considered clear indication of cytotoxic potential in the test material. All the materials were not cytotoxic, but 3 storage solutions of them inhibited growing L929 cells.

• Structural Engineering and Mechanics
• /
• v.74 no.4
• /
• pp.567-576
• /
• 2020

Considerable controversy surrounds the choice of the best abutment type for implant prosthetics. The two most common structures are hex and non-hex abutments. The non-hex abutment typically furnishes a larger contact area between itself and the implant than that provided by a hex structure. However, when a hex abutment is loaded, the position of its contact area may be deeper than that of a non-hex abutment. Hence, the purpose of this study is to determine the different biomechanical behaviors of an internal bone-level implant based on the abutment type-hex or non-hex-and clinical crown length under static and cyclic loadings using finite element analysis (FEA). The hex structure was found to increase the implant and abutment stability more than the nonhex structure among several criteria. The use of the hex structure resulted in a smaller volume of bone tissues being at risk of hypertrophy and fatigue failure. It also reduced micromovement (separation) between the implant components, which is significantly related to the pumping effect and possible inflammation. Both static and fatigue analyses, used to examine short- and long-term stability, demonstrated the advantages of the hex abutment over the non-hex type for the stability of the implant components. Moreover, although its impact was not as significant as that of the abutment type, a large crown-implant ratio (CIR) increased bone strain and stress in the implant components, particularly under oblique loading.

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.89-93
• /
• 2015

Ion-beam irradiation(IB) on $HfO_2$ surface induced high-performance liquidcrystal(LC) driving at a 1-V threshold with vertical alignment of liquid crystals(LC). The high-k materials Atomic layer deposition was used to obtain LC orientation on ultrathin and high-quality films of $HfO_2$ layers. To analyze surface morphological transition of $HfO_2$ which can act as physical alignment effect of LC, atomic force microscopy images are employed with various IB intensities. The contact angle was measured to elucidate the mechanism of vertical alignment of LC on $HfO_2$ with IB irradiation. Contact angle measurement show the surface energy changes via IB intensity increasing.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.2
• /
• pp.92-97
• /
• 2016

This paper presents design and simulation of wide band RF microswitch that uses electrostatic actuation for its operation. RF MEMS devices exhibit superior high frequency performance in comparison to conventional devices. Similar techniques that are used in Very Large Scale Integration (VLSI) can be employed to design and fabricate MEMS devices and traditional batch-processing methods can be used for its manufacturing. The proposed switch presents a novel design approach to handle reliability concerns in MEMS switches like dielectric charging effect, micro welding and stiction. The shape has been optimized at actuation voltage of 14-16 V. The switch has an improved restoring force of 20.8 μN. The design of the proposed switch is very elemental and primarily composed of electrostatic actuator, a bridge membrane and coplanar waveguide which are suspended over the substrate. The simple design of the switch makes it easy for fabrication. Typical insertion and isolation of the switch at 1 GHz is -0.03 dB and -71 dB and at 85 GHz it is -0.24 dB and -29.8 dB respectively. The isolation remains more than - 20 db even after 120 GHz. To our knowledge this is the first demonstration of a metal contact switch that shows such a high and sustained isolation and performance at W-band frequencies with an excellent figure-of merit (fc=1/2.pi.Ron.Cu =1,900 GHz). This figure of merit is significantly greater than electronic switching devices. The switch would find extensive application in wideband operations and areas where reliability is a major concern.

• Korean Journal of Applied Biomechanics
• /
• v.30 no.1
• /
• pp.73-81
• /
• 2020

Objective: The purpose of this study is to analyze the effects of aquatic walking exercise on gait and balance parameters of elderly women. Method: 15 elderly people were recruited for this study (age: 73.20±5.19 yrs, height: 153.87±3.36 cm, mass: 60.33±5.73 kg). All variables were measured using Gaitview AFA-50. The variables were the heel contact time ratio, gait angle, and M/P change ratio for gait patterns and ENV, REC, RMS, Total Length, TLC, Sway velocity, and Length/ENV for balance abilities. A paired t-test and the Wilcoxon signed-rank test were carried out to verify the differences in the test scores after participating in the water walking program. The significance level for all statistical analyses was set to α=.05. Results: As for the changes in their walking function after the exercise, heel contact time ratio (p<.01) showed a statistical significance, while gait angle and M/P change ratio did not reveal statistically significant differences. In the test of balance ability on both feet and with eyes opened, statistical significance was found in ENV, REC, RMS, TLC (p<.01), and sway velocity (p<.05), while the test with eyes closed showed statistical significance in length/ENV as well as ENV, REC, RMS, sway velocity (p<.01) TLC, and total length (p<.05). As for the single-leg stance balance ability, ENV and REC revealed statistically significant differences. Conclusion: These results show that water walking is effective for improving the function of the ankle flexor muscles, providing stability to the ankle joint during walking and helping efficient walk. In addition, it is also expected to help prevent falls due to loss of balance by improving the stability of lower extremity muscles and trunk.

• Korean Journal of Veterinary Research
• /
• v.35 no.4
• /
• pp.843-851
• /
• 1995

To observe the effect of Demodex canis infection on the cellular immune response and hematological profile, 8 Doberman pinschers experimentally infected with D cains and 4 uninfected control dogs were sensitized with 2, 4-dinitro-chlorobenzene(DNCB) on the skin and were challenged with DNCB 14 days after the initial sensitization to elicit allergic contact dermatitis. Histological and hematological changes of these dogs were then observed. Macroscopic changes of skin challenged with DNCB in D canis-infected dogs included significantly reduced area of allergic reaction(p<0.05) than in uninfected control group. Infiltration of inflammatory cells in the D canis-infected group was also significantly reduced(p<0.05) than in the uninfected control group. These changes indicated that the cell-mediated immune response of the animals was suppressed by the infection with D canis. Total white blood cell count in dogs infected with D canis was increased when dogs were sensitized with DNCB (p<0.01). The result appeared to be caused by stress due to D canis infection, secondary bacterial infection and decreased efficacy of general body defense system. Blood eosionophils were increased in D canis-infected dogs which appreared to be caused by the allergic contact dermatitis. Blood chemistry analysis revealed that total protein and globulin were increased(p<0.05), while albumin level was decreased. This result appeared to be caused by secondary bacterial infection.

• Membrane Journal
• /
• v.23 no.3
• /
• pp.220-225
• /
• 2013

Hydrophilic monomers were polymerized for lamination on polyvinylidene fluoride (PVDF) membrane surface for hydrophilization of the membranes. Hydrophilization reduced the contact angle from $95^{\circ}$ to $55^{\circ}$ and enhanced the water flux by 10 times while it reduced the bovine serum albumin (BSA) adsorption amount to 1/4 level. Thermal polymerization process was optimized by examining several operation parameters. Dimethyl oxobuthyl acrylamide (DOAA) showed the best effect due to its better hydrophilicity than others. Increase of amount of monomer enhanced the performance until the optimum concentration of 30 wt%, beyond which excess amount of monomer resulted in homopolymerization to deteriorate the performance. Azobis (isobutyronitrile)(AIBN) initiator has greater activation temperature range than benzoyl peroxide (BPO) and it showed better hydrophilation performance. Two stage lamination process, application of initiator followed by monomer addition, was more effective than one stage process, addition of initiator and monomer at once, which still reduced the contact angle but also reduced the water flux by pore blocking phenomena.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.16 no.4
• /
• pp.477-497
• /
• 1994

The purpose of this study was to investigate the effect of timing of implant insertion on osseointegration after tooth extraction. Fifteen mongrel dogs, weighing 15kg or more, were used. The lower right 1st, 2nd, 3rd, 4th premolars and 1st molar were extracted under general anesthesia. Implants were inserted at 2, 4, and 8 weeks after extraction of the teeth, being designated as 2-, 4-, and 8-week groups, respectively. Results obtained were as follows. 1. Macroscopically there was neither an infection at the implant site nor an exposure of the implant. 2. Histologically the surrounding bone of the implant was less mature in the 2-week group than in the 4- and 8-week groups. 3. The implant-bone contact ranged from 75 to 82%, with no significant differences among the groups. No increase in the implant-bone contact was found with increasing healing periods from 4 to 12 weeks after implant insertions. 4. The average depth (0.64mm) of the fibrous connective tissue ingrowth in the 2-week group was slightly deeper than those in the 4- (0.51mm) and 8-week (0.53mm) groups at 12 weeks after implant insertion. 5. the implant-bone interfacial bond strengths were 73.05 kgf in the 2-week group, 69.71 kgf in the 4-week group and 73.76 kgf in the 8-week group. No significant difference was noted in pullout force among the groups. The degree of confidence of interfacial bone strength was highest in the 8-week group, followed by the 4- and 2-week groups. These results indicate that at least 4 weeks of healing period will be required before implant is to be inserted following tooth extraction.

• Journal of Environmental Science International
• /
• v.19 no.11
• /
• pp.1437-1444
• /
• 2010

This research was to find out the effectiveness of the horticultural therapy program based on the therapeutic factors and the most meaningful experiences of the clients. For this purpose "Green harmony" program focused on harmony through horticulture was implemented. It is based on the preposition that holistic health is promoted with harmonious relationships with oneself, other people, community and nature. The program has three-fold structure: In innermost it deals with the task of the late adolescent, i.e., self identity, secondly the experience of communication and solidarity in the group, and finally extension of interest to the community. For the therapeutic intervention, questions using the metaphor of the activity were given to the clients for the establishment of self-identity, while group activity and the donation of the works let the second and third purpose accomplished. Outdoor activity, 'Tire garden project', has provided the clients with chances of the contact with nature, cooperation with other group members, and a contest to provoke enthusiasm. Also recycling and greening of the community were possible by utilizing old tires for the containers and by donating the final works to the community. For the evaluation of the result, the effect of the program on the stress of the college students was tested, and the most meaningful experiences during the participation to the program were asked to identify the therapeutic factors acknowledged by clients. "Green harmony" program has brought positive effects on the stress of the clients in spite of relatively short period of five weeks. The clients has acknowledged plant/nature contact and interactions between group members for the most meaningful experiences. This research suggests "Green harmony" horticultural therapy program based on the therapeutic factors is highly applicable for the general populations.

• The Journal of Advanced Prosthodontics
• /
• v.3 no.2
• /
• pp.63-68
• /
• 2011

PURPOSE. The object of this study was to investigate the effect of UV irradiation (by a general commercial UV sterilizer) on anodized titanium surface. Surface characteristics and cellular responses were compared between anodized titanium discs and UV irradiated anodized titanium discs. MATERIALS AND METHODS. Titanium discs were anodized and divided into the following groups: Group 1, anodized (control), and Goup 2, anodized and UV irradiated for 24 hours. The surface characteristics including contact angle, roughness, phase of oxide layer, and chemical elemental composition were inspected. The osteoblast-like human osteogenic sarcoma (HOS) cells were cultured on control and test group discs. Initial cellular attachment, MTS-based cell proliferation assay, and ALP synthesis level were compared between the two groups for the evaluation of cellular response. RESULTS. After UV irradiation, the contact angle decreased significantly (P<.001). The surface roughness and phase of oxide layer did not show definite changes, but carbon showed a considerable decrease after UV irradiation. Initial cell attachment was increased in test group (P=.004). Cells cultured on test group samples proliferated more actively (P=.009 at day 2, 5, and 7) and the ALP synthesis also increased in cells cultured on the test group (P=.016 at day 3, P=.009 at day 7 and 14). CONCLUSION. UV irradiation induced enhanced wettability, and increased initial cellular responses of HOS cells on anodized titanium surface.