• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.1012-1015
• /
• 2005

This paper is designed to estimate friction and powdering characteristic of coating layer on galvannealed sheet steel with different annealing temperature, which is 465, 505, 515 and $540^{\circ}C$. Estimations of powdering and friction were done using a $60^{\circ}$ bending test and one side friction test, respectively. In order to obviously understand the effect of coatings on friction cross-section of coatings before and after friction test was also observed by SEM. The results show that powdering of coatings is increased with increasing of annealing temperature and that friction characteristic greatly depends on powdering which leads to increase of real contact area between tools and coatings.

• Korean Journal of Metals and Materials
• /
• v.50 no.1
• /
• pp.8-12
• /
• 2012

This study aims to analyze the formability property of surface texturing processed automotive steel sheet for improving the sheet forming property. In the paper, the effect of cavities fabricated using the laser surface texturing technique on automotive high strength steel sheets was studied. The frictional behavior of the sheet drawing is a function of interface parameters such as sheet surface roughness, holding force, contact pressure, etc. For these reasons, automotive steel researchers want to optimize the surface topography of automotive steel sheets in order to enhance the formability. Therefore, this study presents the behavior of deformation of a laser surface texturing steel sheet by considering the frictional operation during the deep drawing process.

• Asia Pacific Journal of Business Review
• /
• v.5 no.2
• /
• pp.45-57
• /
• 2021

The COVID-19 pandemic has ushered in a new era of untact and we are quickly adapting to this untact era. In the current situation where it is difficult to contact each other face-to-face, Virtual Reality (VR) is an opportunity factor for indirect tourism and a good alternative to viewing cultural heritage. This study showed that the effects of experience economies such as entertainment experience, aesthetic experience, escapist experience, and spiritual experience on VR content satisfaction. Furthermore, we examined whether consumers' perceived risks to COVID-19 moderate the relationship between experience economy and satisfaction. This study investigated 149 people who experienced VR content about Jerusalem. The results have shown that entertainment experience and aesthetic experience have a positive effect on the satisfaction with the VR content. Furthermore, perceived risks about COVID-19 have been shown to moderate the effects of aesthetic experience and spiritual experience on satisfaction. Finally, we provided implications based on our findings.

• Imaging Science in Dentistry
• /
• v.52 no.2
• /
• pp.165-170
• /
• 2022

Purpose: This report presents a case of an unusual and rare presentation of Stafne bone defect (SBD) with apical resorption extending from the lower right lateral incisor to the right first premolar. A systematic search of the current literature on cases where SBD affected the adjacent teeth was conducted. Materials and Methods: From 259 identified articles, 114 studies were examined, containing 12 individuals with a mean age of 41.58 years. Ten cases in the anterior mandible and 2 in the posterior mandible were found. Results: The results of SBD varied from apical blunting to severe root resorption, and some cases showed close apical contact with the lesion or involvement of the root without any effect. Conclusion: SBD is an unusual incidental finding in the anterior region of the mandible, and unexpected behavior of the lesion, such as root resorption, must be considered.

• Journal of Institute of Convergence Technology
• /
• v.11 no.1
• /
• pp.7-12
• /
• 2021

The magnetic gear, which amplifies the torque by filtering the magnetic field generated by the low-speed permanent magnet with a modulator, can exclude gear contact and can be effectively applied when there are environmental restrictions. In this paper, we discuss the magnetic force characteristics of a magnetic gear using a magnetic focusing array that replaces a general permanent magnet array magnetized in a radial direction along the circumferential direction. The torque increasing effect of the discussed array, known as an arrangement that increases the principal component by focusing a radial magnetic field, is compared with that of a general magnetic gear. In particular, in a magnetic gear using such an array, the sensitivity of torque according to variables is analyzed to see how various variables known as factors affecting torque have an effect.

• Advances in concrete construction
• /
• v.15 no.2
• /
• pp.127-135
• /
• 2023

The present paper develops application of TSDT and MCST to analysis of a FG cylindrical micro-shell. The present model may be used as a sensor applicable in badminton net to detect contact. The radial and axial displacement components are described based on TSDT for more accurate analysis. The effect of small scales is accounted based on MCST. The solution is presented for a SS boundary condition to account the influence of various important parameters. A comparative analysis is presented to examine the effect of order of employed shear deformation theory on the axial and radial displacements.

• Journal of Environmental Science International
• /
• v.10 no.6
• /
• pp.387-391
• /
• 2001

The hydroxyapatite(HAp) as a carrier the for ion exchange agent of $Ag^+$ions was prepared in semiconductor fabrication, The Ca/P molar ratio of the HAp was 1.65. The HAp is molded in shape of the antimcrobial ball and then sintered at 100$0^{\circ}C$ Ag-containing HAp(HAp-Ag) was prepared by incorporating $Ag^+$/ions in HAp crystals through an ion-exchange reaction in solutions containing 0.01M $AgNO_3$. The antimicrobial effect of HAp-Ag for bacteria such as Escherichial coli and Staphylococcus aureus has been Investigated. The concentrations of silver in the antimicrobial ball was determined by inductively coupled plasma and the amount of $Ag^+$ions was 9.0$\mu\textrm{g}$/g. The HAp-Ag exhibited excellent antimicrobial effect for bacteria such as E. coli and S. aureus. The bactericidal activity was considered to be caused by direct contact of bacteria with $Ag^+$ions in the HAp crystals. The HAp would likely to be possible as a carrier of antimicrobial metal ions such as Ag, Cu, and Zn by recycling of waste sludge in the semiconductor fabrication process.

• Journal of Korean Physical Therapy Science
• /
• v.8 no.2
• /
• pp.1073-1080
• /
• 2001

The purpose of this study was to determine the effect of lift to the shoe of the affected limb on gait patterns in subjects with hemiplegia. The subjects of this study were 18 post-stroke hemiplegics. For the study, insole of the paretic side was lifted 10 mm higher, and duration of dynamic weight bearing was measured. before and after the lift application. For the measurement of carry-over effect of lift, we got data of there three items prior to and 3 weeks after lift application and 3 days after removal of the lift. Dynamic weight bearing was significantly decreased in heel contact and footflat phases only when just after application of the lift, without any change after 3 weeks application. In heel-off phase, dynamic weight bearing did not show any significant difference between before and just after application of lift whereas significantly decreased after 3 weeks application. According to this study, lift applied to the shoe of the paretic limb was not significantly effect in inducing dynamic weight bearing, but changed a dynamic weight bearing.

• Nuclear Engineering and Technology
• /
• v.52 no.7
• /
• pp.1380-1385
• /
• 2020

An annular linear induction electromagnetic pump (ALIP) which has a developed pressure of 0.76 bar and a flow rate of 100 L/min is designed to analysis end effect which is main problem to use ALIP in thermohydraulic system of the prototype generation-IV sodium-cooled fast reactor (PGSFR). Because there is no moving part which is directly in contact with the liquid, such as the impeller of a mechanical pump, an ALIP is one of the best options for transporting sodium, considering the high temperature and reactivity of liquid sodium. For the analysis of an ALIP, some of the most important characteristics are the electromagnetic properties such as the magnetic field, current density, and the Lorentz force. These electromagnetic properties not only affect the performance of an ALIP, but they additionally influence the end effect. The end effect is caused by distortion to the electromagnetic field at both ends of an ALIP, influencing both the flow stability and developed pressure. The electromagnetic field distribution in an ALIP is analyzed in this study by solving Maxwell's equations and using numerical analysis.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.5
• /
• pp.773-777
• /
• 2012

Recently UV laser micromachining processes is widely introduced to meet the needs of advanced components of IT, BT and ET industries. Due to the characteristics of non-contact and high-speed laser processing, UV laser micromachining is applied to manufacture very thin substrate such as polymer, metals and composite. These minimum line width obtained by UV laser micromachining is generally determined from laser wavelength, optical lens and its numerical aperture. In this paper we will show the lens effect of water droplet on the surface of workpiece to reduce the line width when UV laser light is irradiated and focused through the water droplet. Because of the refraction effect generated by the semi-spherical or spherical shape of water droplet, we can find smaller line width. And water droplet could not only protect thermal deformation, but also carry away burr around micro dent. Firstly fundamental theory of minimum line width was derived from relationship between the geometry of water droplet and laser light trace, and then experimental and simulation results will be finally compared to verify the effectiveness of water droplet lens effect of UV laser micromachining process.