• Korean Journal of Applied Biomechanics
• /
• v.34 no.3
• /
• pp.133-144
• /
• 2024

Objective: Neuromuscular training may often result in an incomplete improvement of biomechanical risk factors associated with non-contact ACL injury. This study aimed to investigate the effects of reactive neuromuscular training (RNT) on dynamic postural control of the lower extremity during single-leg drop landing (SLDL) in comparison with conventional neuromuscular training (CNT). Method: Twenty-eight recreational female athletes were randomized to a CNT group (n=15) or a RNT group (n=13). All participants performed SLDL for three-dimensional motion analysis before and after CNT and RNT. The kinematic variable was calculated from before 50 milliseconds (ms) to after 100 ms initial contact: joint angle (degree). The kinetic variable was calculated from initial contact to after 100 ms: internal net joint moment (Nm/kg). Time series curve for normalized data was represented for group means and associated 95% confidence intervals. Effect sizes using Cohen's d was also calculated. Results: In within-group differences, the CNT group showed decreased knee flexion angle (0~100% of the task) and decreased knee valgus angle (0~50% of the task) after the intervention, whereas the RNT group showed increased hip flexion angle (0~14% of the task), decreased hip adduction angle (0~100% of the task), and decreased knee valgus angle (0~100% of the task) after the intervention. In between-group differences, the RNT group exhibited more hip flexion angle (0~49, 61~91% of the task), more knee flexion angle (0~100% of the task), and less knee valgus angle (0~55% of the task) than the CNT group. Conclusion: These findings suggest that both training intervention programs modified dynamic posture of the hip and knee during SLDL. Therefore, combining a neuromuscular training program with RNT technique would be more efficient for future injury prevention efforts.

• Journal of Korea Foundry Society
• /
• v.14 no.3
• /
• pp.248-257
• /
• 1994

Research in heat transfer and solidification commonly involves experimentation and mathematical modeling with associated numerical analysis and computation. Inverse problems in heat transfer are part of this paradigm. During the solidification of metal casting, an interfacial heat transfer resistance exists at the boundary between the casting and the mold, and this heat transfer resistance usually varies with time. In the case of the squeeze casting the contact heat transfer resistance is decreased by pressure and ideal contact is almost accomplished. In the present work, heat transfer coefficient, which is inverse value of the heat transfer resistance, was used for convenience. A numerical technique, Non-Linear Estimation has been adopted for calculation of the casting/mold interfacial heat transfer coefficient during the squeeze casting process. In this method, the measured temperature data from experiment were used. The computational results were applied to the analysis of heat transfer and solidification.

• Archives of Pharmacal Research
• /
• v.27 no.4
• /
• pp.442-448
• /
• 2004

Wogonin (5,7-dihydroxy-8-methoxyflavone) is a down-regulator of cyclooxygenase-2 and inducible nitric oxide synthase expression, contributing to anti-inflammatory activity in vivo. For further characterization of modulatory activity on ploinflammatory gene expression in vivo, the effect of wogonin was examined in this experiment using animal models of skin inflammation. By topical application, wogonin inhibited an edematic response as well as ploinflammatory gene expression against contact dermatitis In mice. Wogonin inhibited ear edema ($19.4-22.6\%$) at doses of $50-200\;{\mu}g$/ear and down-regulated interleukin-$1{\beta}$ induction ($23.1\%$) at $200{\mu}g$/ear in phenol-induced simple irritation. Wogonin ($2{\times}50-2{\times}200{\mu}g$/ear) also inhibited edematic response ($51.2-43.9\%$) and down-regulated ploinflammatory gene expression of cyclooxygenase-2, interleukin-$1{\beta}$, interferon-$\gamma$, intercellular adhesion molecule-1 and inducible nitric oxide synthase with some different sensitivity against picryl chloride-induced delayed hypersensitivity reaction. All these results clearly demonstrate that wogonin is a down-regulator of ploinflammatory gene expression in animal models of skin inflammation. Therefore, wogonin may have potential for a new anti-inflammatory agent against skin inflammation.

• Macromolecular Research
• /
• v.8 no.1
• /
• pp.6-11
• /
• 2000

In this study, we examined the charging behavior of chopped carbon fibers during electro-flocking process, which is one of the key processes of the novel technique for fabricating conductive polymer composite films. Short carbon fibers (CF) during electroflocking were electrically charged by the combined effect of contact charging, corona charging and tribocharging. The specific charge built on CF surface was measured by using Faraday cup method. Specific charge increased not only with increasing electric field strength and potential impressed to mesh electrode as expected from theoretical considerations in literature, but with decreasing mesh opening size due to the improved contact charging condition. However, CF length was found unexpectedly to influence the amount of CF specific charge due to the agglomerated nature of CF flocks leading to the change in charging conditions.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.4
• /
• pp.354-361
• /
• 2008

Cold rolled steel sheet for automotive was treated by Ar/$O_2$ atmospheric pressure plasma to improve the adhesive bonding strength. Through the contact angle test and calculation of surface free energy for cold rolled steel sheet, the changes of surface properties were investigated before and after plasma treatment. The contact angle was decreased and surface free energy was increased after plasma treatment. And the change of surface roughness and morphology were observed by AFM(Atomic Force Microscope). The surface roughness of steel sheet was slightly changed. Based on Taguchi method, single lap shear test was performed to investigate the effect of experimental parameter such as plasma power, treatment time and flow rate of $O_2$ gas. Results shows that the bonding strength of steel sheet treated in Ar/$O_2$ atmospheric pressure plasma was improved about 20% compared with untreated sheet.

• Tribology and Lubricants
• /
• v.20 no.5
• /
• pp.237-244
• /
• 2004

Micro/nano tribological characteristics of PTFE coating films were experimentally studied. PTFE (polytetrafluoroethylene) modified polyethylene and low molecular weight PTFE were used as a coating materials. These films were deposited on Si-wafer (100) by IBAD (ion beam assisted deposition) method. The Ar ion beam sputtering was performed to change the surface topography of films using a hollow cathode ion gun under different Ar ion dose conditions in a vacuum chamber. Micro/nano tribological characteristics, water wetting angles and roughness were measured with a micro tribotester, SPM (scanning probe microscope), contact anglemeter and profilometer, respectively. The durability of the films were measured with macro tribotester. Results showed that the PTFE coating surfaces were converted to hydrophobic. The water contact angle of coated surfaces and surface roughness increased with the coating thickness. Adhesion and friction in micro and nano scale were governed by magnitude of normal load in soft material such as PTFE films. As the increase of sputtering time on low molecular weight PTFE films, the surface roughness was increased and nano adhesion and friction were decreased. The nano tribological characteristics of surfaces are mainly improved by chemical modification such as PTFE coating and given a synergy effect by the physical modification such as topographic modification.

• Journal of the Korean Ceramic Society
• /
• v.51 no.5
• /
• pp.399-405
• /
• 2014

Porous alumina with different porosities, 5.2 - 47.5%, were coated with cover-glass having a thickness of $160{\mu}m$, using epoxy adhesive. We investigated the effect of the porosity of the substrate layer on the crack initiation load, and the size of cracks propagated in the coating layer. Hertzian indentations were used to evaluate the damage behavior under a constrained loading condition. Typically, two types of cracks, ring cracks and radial cracks, were observed on the surface of the glass/porous alumina structure. Indentation stress-strain curves, crack initiation loads, crack propagation sizes, and flexural strengths were investigated as a function of porosities. The results indicated that a porosity of less than 30% and a higher substrate elastic modulus were beneficial at suppressing cracks occurrence and propagation. We expect lightweight mechanical components with high strength can be successfully fabricated by coating and controlling porosities in the substrate layer.

• Journal of Korean Ophthalmic Optics Society
• /
• v.14 no.2
• /
• pp.27-30
• /
• 2009

Purpose: Transmittance at UV-visible spectra range was measured to confirm the effect of wet/dry state of commercially available SCL on human eyes. Method: Commercially available five SCLs fabricated by different materials were selected to measure optical properties according to humidity. Results: A relatively high transmittance above about 80% in the visible spectra range of the SCLs were observed. In the UV spectra range, the wet samples showed higher transmittance than those dried except an unusual case. Conclusions: All the samples having a high optical properties in the visible spectra range exhibit a high transmittance in the UV region. Further research will be needed to develop new materials having a sharp absorption edge in the UV spectra range.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.301-301
• /
• 2012

Amorphous In-Ga-Zn-O (a-IGZO)는 광학적으로 투명하고 높은 전자이동도를 가지고 있어서 차세대 thin-film-transistor의 channel layer 물질로 각광받고 있다. 이러한 a-IGZO를 TFT channel layer로 사용하기 위해서는 소스 드레인 전극물질과 IGZO박막의 계면에서 ohmic contact을 만드는 것도 중요하다. 하지만 산화물 반도체의 특성상 금속물질을 증착시킬 때 산화금속계면을 형성하기 때문에 ohmic contact이 형성되기 어려운 것으로 알려져 있다. Au는 보통 전극물질로 많이 사용되는데, 이는 전기전도도가 매우 높고, 독특한 산화환원반응 특성을 보이지만, 화학반응을 잘 일으키지 않는 안정성을 가지는 성질에 기인한다. 본 연구진은 Au가 a-IGZO에 증착 시에 일어나는 표면의 화학적 상태변화를 이해하기 위해 방사광을 이용한 고분해능 광전자 분광법을 이용하여 표면변화를 분석하였다. Au는 (Au 4f) 증착 초기엔 약간의 gold oxide가 함께 형성되지만, 주로 metal gold의 형태로 존재하였다. In 3d, Ga 3d, O 1s, Zn 3d 각각의 스펙트럼에서는 Au 증착으로 인해 낮은 결합에너지에 새로운 state가 나타났다. 한편, In은 상대적으로 다른 원소들에 비해 Au와 좀 더 결합을 잘 하는 것으로 나타났는데 이는, In 5s 전자궤도가 전도메커니즘에서 중요한 역할을 하기 때문에, In-Au의 상대적인 강한 결합은 a-IGZO의 전기적 특성 변화에 기여할 수 있음을 의미한다.

• Journal of Korean Academy of Nursing
• /
• v.30 no.5
• /
• pp.1133-1144
• /
• 2000

This study was conducted to evaluate the effects of the program for the autistic children which was designed to promote mother-child attachment. The subjects of this study were consisted of 11 pairs of mother and child( 7 for participant group:PG, 4 for non-participant group: NPG), who were diagnosed as Pervasive Developmental Disorder. The intervention was consisted with play activity centered mother-child interaction, educational activity for mothers, lecture, video-feedback, and supports. The main data were collected by video-taping and analyzed by Wilcoxon Rank Sign Test, and Content Analysis. The results obtained were as follows, 1. Before the program, there were no significant group differences on the children's and the mother's characteristics. After the program, total score on the attachment of PG was higher than that of NPG, but not significant. Only proximity-seeking behaviors and contact-maintaining behaviors were higher significantly(p<.05). Then the characteristics on contact- maintaining behaviors of PG were lasting longer and reciprocal than those of NPG. 2. After the program, the score on mother's nurturing behavior of PG was significantly more increased. The mother's behaviors to her child of PG became more child- centered, positively responsive, expressive supportively. But there were pretty big individual difference. It can be concluded that Mother-child Attachment Promotion Program is effective. Thus it can be recommended to be a early intervention model for autistic children.