• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.5
• /
• pp.527-533
• /
• 1999

Hertzian indentation tests with spherical indenters in water were conducted to examine the contact fatigue in three dental ceramics, such as feldspathic porcelain, micaceous glass-ceramic (MGC) and glass-infiltrated alumina, which was used as dental restorations, and evaluated the effect of contact damage on strength. Initial damage was dependent of microstructure, showing cone cracks of brittle behavior in the feldspathic porcelain and deformation of quasi-plastic behavior in the MGC, with an intermediate case in the glass-infiltrated alumina. However, as increasing the number of cyclic loading (n=1~n =$10^6$)all materials showed an abrupt strength degradation, at which fracture was originated from damage in the contact fatigue. There were two strength degradation with increasing the number of cyclic loading in specific loads (200N, 500N, 1000N):first was from the cone cracks, and second was from the radial cracks created by cyclic loading. The radial cracks, once formed, led to rapid degradation in strength properties, Finally the material was failed at the high number of cyclic loading. Strength degradation with indentation load at fixed number of cyclic loading indicated that the feldspathic porcelain should be highly damage tolerant to the contact fatigue.

• Applied Chemistry for Engineering
• /
• v.32 no.6
• /
• pp.664-670
• /
• 2021

Stainless steel was applied as bipolar plate (BP) of polymer electrolyte membrane fuel cell (PEMFC) due to high mechanical strength, electrical conductivity, and good machinability. However, stainless steel was corroded and increased contact resistance resulting PEMFC performance decrease. Although the corrosion resistance could be improved by surface treatment such as noble metal coating, there is a disadvantage of cost increase. The stainless steel corrosion behavior and passive layer influence on PEMFC performance should be studied to improve durability and economics of metal bipolar plate. In this study, SUS316L bipolar plate of 25 cm² active area was manufactured, and experiments were conducted for corrosion behavior at an anode and cathode. The influence of SUS316L BP corrosion on fuel cell performance was measured using the polarization curve, impedance, and contact resistance. The metal ion concentration in drained water was analyzed during fuel cell operation with SUS316L BP. It was confirmed that the corrosion occurs more severely at the anode than at the cathode for SUS316L BP. The contact resistance was increased due to the passivation of SUS316L during fuel cell operation, and metal ions continuously dissolved even after the passive layer formation.

• Korean Chemical Engineering Research
• /
• v.57 no.2
• /
• pp.177-184
• /
• 2019

Non-fluorinated water repellent coating solutions were obtained using methyltrimethoxysilane (MTMS) and trimethylethoxysilane (TMES) as precursors. The solutions were spin-coated on a cold-rolled steel sheet and cured thermally to prepare water repellent coating films. During this process, the effect of molar ratio of TMES/MTMS was studied for the hydrophobic properties of the coating films. Hydrophobic properties of coating films were characterized using contact angle measurement, surface morphology analysis and infrared spectroscopy. When the molar ratio of TMES/MTMS was varied from 0 to 30, the contact angle of the un-coated cold-rolled steel sheet was $30^{\circ}$, whereas when the molar ratio of TMES/MTMS was 1, the contact angle increased to $104^{\circ}$ and water repellency was significantly improved. In the case of TMES/MTMS molar ratios of 10, 15, 25 and 30, the contact angles of coating films showed $109^{\circ}$, $114^{\circ}$, $117^{\circ}$ and $144^{\circ}$, respectively. At this time, the hydrophobicity of the coating films was improved by the increase of the surface roughness and the content of the methyl component at the coating surface. In particular, when the molar ratio of TMES/MTMS was 30, the overall surface roughness was greatly increased due to the presence of surface particles as well as the water repellency due to methyl groups of TMES, resulting in super hydrophobicity of $144^{\circ}$.

• Journal of the Korean Applied Science and Technology
• /
• v.39 no.2
• /
• pp.205-219
• /
• 2022

This study is a descriptive research study to understand the effects of nurses' perception of the disabled, contact experience with the disabled, and human rights sensitivity on attitudes toward the disabled. The subjects of the study were 181 nurses working at two university hospitals in D City and one university hospital in C Special Self-Governing City. Data were collected from September 2, 2021 to October 6, 2021. The collected data wre analyzed using IBM SPSS 26.0 program, and analyzed with t-test, ANOVA, Pearson's Correlation Coefficients, and Multiple Regression Analysis. Factors affecting the subject's attitude toward people with disabilities were perception of people with disabilities(t=-3.96, p<.001), presence or absence of contact with patients with disabilities(t=3.23, p=.001), and the ability to perceive responsibility among human rights sensitivity(t=2.13, p=.035), whether or not they had completed education for improvement the awareness of the disabilities(t=2.90, p=.004), and whether they were recognized of the Act on the Right to Health and Medical Accessibility for the Disabled(t=2.44, p=.016), which showed 30% of explanatory power(F=9.36, p<.001). Accordingly, it is necessary to develop an educational program that can foster nurses' attitudes toward the disabled, including awareness of the disabled, human rights sensitivity, the Health Rights Act for the Disabled, and the experience of contact with the disabled.

• Health Policy and Management
• /
• v.8 no.2
• /
• pp.149-165
• /
• 1998

The purpose of this study is to examine the effect of the health status on the quality of life of the rural elderly, and to examine the conditional effect of socialsupport for that influence. 'Quality of life' used in this study was defined by unidimensional approach. The data were collected by conducting individual interviews with 296 rural elderly people aged 60 and the above who were living in one township of Kangwondo, between the time period of October and November 1995. The main findings are as follows: 1. Hierarchical regression analyses were carried out to examine the relative contribution of three set of variables on the quality of life. The first step, which included sociodemographic factors showed that the coefficient of determination (R$^{2}$) was 8% and income was a statisically significant variable. The second step, by adding health related factors, revealed that the R$^{2}$ was increased to 34% by 26% point and the degree of health recognition was the statistically significant variable. The third step, by projecting additionall social support related variables revealed that the R$^{2}$ was 42% 2. The conditional effect of social support was analyzed to examine the influence the health status has on the quality of life. The results are as follows: 1) The IADL and the degree of social contact interacted, resulting in that the higher degree of social contact boosted the stronger effect of IADL. 2) The effect of subjective health recognition on the quality of life is depended upon degree of family ontact. 3) The effect of eyesight on the quality of life is depended upon degree of satisfaction in social relation. The lower the degree of social support was, the bigger the influence of health related variables affecting quality of life became. This study explains that health status is a major factor in predicting the quality of life of the aged. Particularly the subjective health recognition was an important factor as the perception of quality of life.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.06a
• /
• pp.19-23
• /
• 2000

Stiction is an undesirable phenomenon that can be encountered often in Micro-Electro Mechanical Systems (MEMS) applications, In order to minimize this effect, Self-Assembled Monolayers (SAM) are commonly used. In this work the frictional characteristics of SAM are investigated using both micro-tribotester and SPM. It was found that the performance of SAM is quite sensitive to coating condition. The experimental results show promise for SAM to be used in sliding applications of micro systems.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.1055-1056
• /
• 2012

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.195-195
• /
• 2015

반도체 제조 시 ohmic contact을 형성하고, barrier metal layer형성을 위해 NH3 기체를 사용하는 rapid thermal nitridation (RTN)은 반도체 공정에 있어 매우 중요한 핵심 기술이다. 그러나 공정 진행 시 발생하는 공정 부산물에 의한 chamber오염으로 인해 매우 정확히 입사 되어야 할 thermal energy의 controllability가 저하되고 있어, 미세 공정능력 구현의 한계에 부닥치고 있다. 본 연구에서는 quartz plate liner를 적용하여 RTN 공정에서 발생하는 공정 부산물인 ammonium chloride (NH4Cl)의 chamber 표면 증착을 최소화하였고, 공정 진행 온도의 controllability를 확보하였다.

• Proceedings of the Zoological Society Korea Conference
• /
• 2000.04a
• /
• pp.71.1-71
• /
• 2000

No Abstract, See Full Text

• IE interfaces
• /
• v.12 no.4
• /
• pp.506-513
• /
• 1999

We use a path analysis to identify influential latent variables on employees' anticipated commitment to a merged bank. Survey samples are taken from Hanvit bank which is a merged form of Hanil and Sangup. Latent variables used in the path analysis are perceptions of organizational support, contact conditions, organizational unity, employee threat and organizational commitment. We find an interesting pre-merger group membership effect as well as merger pattern perceived by employees on the path for the anticipated commitment to the merged bank.