• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.3
• /
• pp.195-201
• /
• 2023

Garlic (Allium sativum)is a major crop in most Asian countries, and its consumption in Asia-Pacific countries exceeds 90% of the global consumption. It contains beneficial ingredients and numerous essential nutrients, such as manganese, vitamin B6, and vitamin B1. Garlic demand is rising not only in Asian countries but also around the world. Particularly, garlic demand has been steadily increasing in European countries, such as Spain, France, Italy, and the American continent. In South Korea, 331,671 tons and 387,671 tons of garlic was produced in 2018 and 2019, respectively, making the country the fifth ranking garlic producer in the world, and the production has been increasing every year. In this study, the study on temperature distribution in cold storage of Korean garlic in folding wire mesh pallet container using CFD (Computational Fluid Dynamics) analysis was performed and Computations were based a commercial simulation software (ANSYS Workbenh Ver. 18.0). Considering the respiration heat of garlic, the decreasing rate of temperature in the area in contact with the cold air was fast due to the inflow of cold air inside, while the decreasing rate of temperature in the center of the pallet was very low. In order to maintain a uniform temperature distribution inside the agricultural product storage pallet in a low-temperature warehouse, it is considered desirable to install an air passageway to allow low-temperature air to flow into the wire mesh pallet.

• Journal of Ocean Engineering and Technology
• /
• v.38 no.5
• /
• pp.282-293
• /
• 2024

This study examined the collision dynamics between tsunami-driven drifting containers and port cranes, prompted by risks from the recent 7.6 magnitude earthquake and tsunami off Noto Peninsula, Japan. Hydraulic experiments were conducted to analyze container drift and collision forces using motion analysis software (DIPP-Motion) and a load cell installed on a crane leg model. The key parameters included the tsunami wave height, container weight (empty and loaded), initial position, and revetment type. The results suggested that higher tsunami wave heights led to more extraordinary inundation, allowing containers to float more efficiently, reducing bottom friction, and increasing drift speed and collision forces. The collision speeds ranged from 1.59 to 2.48 m/s, with collision forces of 45.18 to 77.68 N, representing increases of 6.45 to 15.58 times than no object. Heavier containers required deeper water to float, resulting in lower drift and collision speeds (0.88-0.89 times that of lighter containers). The wave-absorbing revetment caused higher flow velocities, producing collision speeds and forces 1.32-1.48 times greater than the vertical revetment. These findings highlight the importance of considering the tsunami magnitude, container weight, initial position, and revetment type in design, with face-to-face contact conditions crucial for estimating the maximum collision forces and preventing future tsunami damage.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.1
• /
• pp.77-82
• /
• 2010

Our study aims to understand the flow of liquid in an open-top rectangular microchannel that can be used in micro total analysis systems ($\mu$-TAS) because it has advantages in terms of light transmission and energy efficiency. We measured the liquid velocity using particle tracking technique and conducted a simulation with computational fluid dynamics by altering the area of channel cross section and channel length for the capillary-driven flow in the open-top rectangular microchannel. When liquid water drops to an entrance of the fabricated microchannel with a height of 20 μm and a width of 20 ${\mu}m$, it flows along the microchannel by only capillary force. In the wetting behavior of the liquid, important parameters of this flow are channel size, contact angle and liquid properties such as surface tension and viscosity, which are used to control the flow of liquid in the microchannel.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.4
• /
• pp.367-375
• /
• 2014

In numbers of kinds of heat exchanger, the shell-tube heat exchanger is the most commonly used type of heat exchanger in the industry field. In order to improve the thermal performance of the heat exchanger, this study was analyzed heat transfer characteristics according to arrangement of baffle and direction of baffle and bump phase of baffle about shell-tube heat exchanger using appropriate SST (Shear Stress Transport) turbulence model for flow separation and boundary layer analysis. As the boundary condition for CFD (Computational Fluid Dynamics) analysis, the inlet temperature of shell side was constantly 344 K and the variation of the water flow rate was 6, 12, 18 and 24 l/min. As the result of analysis, zigzag baffle arrangement enhances heat transfer rate and pressure drop. Furthermore, in the direction of the baffle, heat transfer rate is more improved with vertical type and angle $45^{\circ}$ type than existing type, and pressure drop was little difference. Also, the bump shape of baffle surface contributes to heat transfer rate and pressure drop improvement due to the increased heat transfer area. Through analysis results, we knew that the increase of the heat transfer was influenced by flow separation, fluid residual time, contact area with the tube, flow rate, swirl and so on.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.9
• /
• pp.1027-1032
• /
• 2012

Two types of very small multiplying gears and arrays have been developed for new dental hand-pieces, and the increased speed ratios, modules, number of teeth, gear diameters, and gear types were calculated based on the dynamics of the machinery. The contacting and bending strengths were evaluated for gear teeth with two design concepts using AGMA equations and finite element analyses, and the contacting stresses on teeth with and without DLC (diamond-like-carbon) coating layers were calculated. Fatigue and tension tests were performed to obtain an S-N curve, the Young's modulus, and the strength of the gear material, and these were utilized in the analyses. Slightly larger stresses were found for 2-axis-type gears than for other types of gears, and the S-N curves showed that a gear lifetime of 109 cycles was satisfied. The contacting stresses in gears coated with DLC were reduced by 30%. A new prototype model of a hand-piece with small gears was successfully fabricated and tested.

• Land and Housing Review
• /
• v.12 no.4
• /
• pp.81-92
• /
• 2021

This study investigates whether urban expansion can act as a cause of the decline of the original city center through the Space Syntax methodology. The urban spatial structure analysis was conducted targeting the downtown area of Jeju-eupseong. The time points for longitudinal analysis were set at five points between 1914 and 2021 including the Japanese colonial period when the cadastral map was drawn up in Jeju City, and the urban spatial structure was analyzed and compared for each time point. ASA (Angular Segment Analysis) was used as a technique for urban spatial structure analysis. This study shows that urban expansion is a cause of the decline of the original downtown. The original city center has moved away from the center as the urban structural change due to the urban expansion. The urban structure of the eastern part of Jeju City has undergone a major transformation between 1914 and 2021. As the old Jeju area where the original city center was located is geographically in contact with the sea, urban sprawl has been made toward Halla Mountain and further to the south of Jeju. Accordingly, the city center has transformed from a monocentric to a polycentric structure. Due to the dynamics of the urban sprawl, the old downtown of Jeju became one of the peripheral neighbourhoods in the Greater Metropolitan of Jeju.

• 한국노년학
• /
• v.40 no.1
• /
• pp.91-109
• /
• 2020

This study aims to investigate the interdependence of Korean middle and old-aged couples in the association between exercise and life satisfaction through grip strength trajectory. Data were drawn from the nationally representative Korea Longitudinal Study of Aging (KLoSA) collected from 2006 to 2016. The sample included couples over 45 years of age in the first wave and participated in all six waves of the survey (Ncouple=1,997). There were three steps for analyses: correlation, parallel latent growth curve model, tests of indirect effects of the mediation paths. Covariates included in the models were husbands and wives' characteristics (age, education, work status, chronic diseases, marital satisfaction, contact frequency with friends or neighbors) and couple's household income. Results showed husbands' and wives' life satisfaction and grip strength were interdependent upon each other. Also, exercise participation of both husbands and wives was associated with both husbands' and wives' life satisfaction via the initial level of grip strength of husbands. Moreover, exercise participation of only husbands was associated with wives' life satisfaction through the initial grip strength of husbands. These results suggest the aging processes of middle and old-aged couples need to be understood in the context of gender dynamics and couple interdependence.

• Journal of the Korean earth science society
• /
• v.23 no.4
• /
• pp.357-368
• /
• 2002

In this study we have tried to explain the barrel-shaped morphology for young supernova remnants considering the dynamical effects of the ejecta. We consider the magnetic field amplification resulting from the Rayleigh-Taylor instability near the contact discontinuity. We can generate the synthetic radio image assuming the cosmic-ray pressure and calculate the azimuthal intensity ratio (A) to enable a quantitative comparison with observations. The postshock magnetic field are amplified by shearing, stretching, and compressing at the R-T finger boundary. The evolution of the instability strongly depends on the deceleration of the ejecta and the evolutionary stage of the remnant. the strength of the magnetic field increases in the initial phase and decreases after the reverse shock passes the constant density region of the ejecta. However, some memory of the earlier phases of amplification is retained in the interior even when the outer regions turn into a blast wave. The ratio of the averaged magnetic field strength at the equator to the one at the pole in the turbulent region can amount to 7.5 at the peak. The magnetic field amplification can make the large azimuthal intensity ratio (A=15). The magnitude of the amplification is sensitive to numerical resolution. This mens the magnetic field amplification can explain the barrel-shaped morphology of young supernova remnant without the dependence of the efficiency of the cosmic-ray acceleration on the magnetic field configuration. In order for this mechanism to be effective, the surrounding magnetic field must be well-ordered. The small number of barrel-shaped remnants may indicate that this condition rarely occurs.

• Journal of the Daesoon Academy of Sciences
• /
• v.47
• /
• pp.173-202
• /
• 2023

In this study, we delve into the potential for innovative cultural education techniques that utilize the timeless tales of Princess Bari and The Tale of Shim Cheong as tailored for the upcoming generations of overseas Korean learners. With a rising number of young overseas Koreans born and raised in their host countries, there emerges a pressing need to craft an educational framework that resonates with the evolving dynamics of their generation. Our endeavor revolves around proposing educational strategies that help solidify identity while carefully considering the intrinsic motivation prevalent among most overseas Koreans. Naturally, the choice of employing the classic epics Princess Bari and The Tale of Shim Cheong as educational resources was deliberate. These narratives are rich in rites of passage and offer profound insights into the transformative journey of their protagonists. Both characters are affluent women in patriarchal societies, and both embark on quests to redefine themselves through new relationships, liberating themselves from the confines of parental ties. This narrative framework provides a unique opportunity for overseas Koreans who are often adrift in the social fabric of their adopted countries. These stories inspire them to introspect and contemplate their own identities. By intertwining their personal narratives with the empowering stories of characters, students are provided a chance to reaffirm their authentic selves. Therein, a paradigm shift can occur that allows individuals to embrace the core elements that define them. Our ultimate objective was to enable students to explore their own stories and immerse themselves in the intricate narratives of classical works. This immersive experience fosters a profound sense of unity with the characters and paves the way for a comprehensive educational plan. This plan not only celebrates the hybrid nature of identity but also cultivates a deep sense of positivity within amalgamated 'subjects.' Such an approach not only fosters a stronger connection with one's heritage but also sparks a genuine curiosity about and affinity for the rich cultural tapestry of one's home country. It's not just education; it's a transformative journey that enriches the lives of overseas Koreans and nurtures a profound bond with their cultural roots.