• 한국식품영양학회지
• /
• 제32권3호
• /
• pp.167-178
• /
• 2019

The purpose of this study was to investigate the intake status of energy drinks, knowledge of caffeine and the perception on intake of energy drinks by university students. We surveyed 351 university students from October 25, 2017 to January 25, 2018. The subjects (70.9%) consumed energy drinks more than once. Male students consumed energy drinks more frequently than the female ones. A huge portion (68.3%) of the subjects consumed energy drinks to recover from fatigue and reduce sleepiness. Moreover, they consumed most of the energy drinks at home and the university library. The main anticipated efficacy of energy drinks was the relieving drowsiness. Respondents (86.3%) perceived that energy drinks could be hazardous to the health of human beings. The main risks of consuming energy drinks were sleep disorders, addiction problems and heart beating. The main recognized effects of energy drinks were relieved drowsiness and decreased fatigue. The major side effects were heart beating, nausea, vomiting, heartburn and sleeping disorders. This study suggests that nutritional education is needed to confirm the recommendation of daily intake for caffeine and to raise awareness about the side effects of energy drinks.

• Geomechanics and Engineering
• /
• 제17권1호
• /
• pp.57-67
• /
• 2019

Water-induced strength reduction is one of the most critical causes for rock deformation and failure. Understanding the effects of water on the strength, toughness and deformability of rocks are of a great importance in rock fracture mechanics and design of structures in rock. However, only a few studies have been conducted to understand the effects of water on fracture properties such as fracture toughness, crack propagation velocity, consumed energy, and microstructural damage. Thus, in this study, we focused on the understanding of how microscale damages induced by water saturation affect mesoscale mechanical and fracture properties compared with oven dried specimens along three notch orientations-divider, arrester, and short transverse. The mechanical properties of calcite-cemented sandstone were examined using standard uniaxial compressive strength (UCS) and Brazilian tensile strength (BTS) tests. In addition, fracture properties such as fracture toughness, consumed energy and crack propagation velocity were examined with cracked chevron notched Brazilian disk (CCNBD) tests. Digital Image Correlation (DIC), a non-contact optical measurement technique, was used for both strain and crack propagation velocity measurements along the bedding plane orientations. Finally, environmental scanning electron microscope (ESEM) was employed to investigate the microstructural damages produced in calcite-cemented sandstone specimens before and after CCNBD tests. As results, both mechanical and fracture properties reduced significantly when specimens were saturated. The effects of water on fracture properties (fracture toughness and consumed energy) were predominant in divider specimens when compared with arrester and short transverse specimens. Whereas crack propagation velocity was faster in short transverse and slower in arrester, and intermediate in divider specimens. Based on ESEM data, water in the calcite-cemented sandstone induced microstructural damages (microcracks and voids) and increased the strength disparity between cement/matrix and rock forming mineral grains, which in turn reduced the crack propagation resistance of the rock, leading to lower both consumed energy and fracture toughness ($K_{IC}$).

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.836-845
• /
• 2007

In DC 1500V electric traction substations, diode rectifiers are commonly used to supply stable DC power with electric train sets. However, it operates in the first quadrant of the voltage-current plane and thus needs regenerative inverters which transfer the surplus regenerative power caused by regenerative braking of electric train sets into the grid. In order to select the proper capacity and installation position of regenerative inverter, it needs to investigate the consumed and regenerative energy of the electric traction substations in advance. This paper presents an analysis of regenerative energy in two substations operating in Seoul line 2 and Kwangju line 1. DC line voltage and feeder currents are measured for a day to calculate consumed and regenerative power for four feeders. We calculated an amount of regenerative energy consumed in other feeders and estimated the cost reduction in energy consumption due to the reuse of regenerative energy.

• 한국식생활문화학회지
• /
• 제14권1호
• /
• pp.1-15
• /
• 1999

A survey was conducted in 591 college students using 8 different cafeterias serving 31 meals. The information was obtained about the name and amount of dishes they consumed from the menu offered by college foodservice. Mean nutrient contents per meal in offered menu were higher than 1/3 of RDA for their age, sex in offered menu. The mean energy content was 466kcal from rice, 113kcal from soup, 141kcal from side dish and 21kcal from kimchi. When side dishes were classified by cooking methods, side dishes using grilling, frying, roasting methods had high energy content and fat percent above 200kcal, 40% per dish. By main ingredients, side dishes with animal food were higher energy than with plant food. Students consumed 94% of the energy provided in offered menu. When compared to proportion of foods consumed by sex, there was 43% of female and 22% of male consumed less than half in soup and 31% of female and 12% of male in kimchi. The most prevalent menu patterns of subjects included rice, soup, 2 side dishes, kimchi and were the same in both sexes. Mean energy intakes per meal were 989kcal for males and 842kcal for females which were enough to meet 1/3 of RDA for their age and sex. Most nutrient intake except fat and vitamin B1 were higher in set menu than in cafeteria. Nutrient adequacy ratio(NAR) were above 0.9 except calcium and vitamin A. The mean energy intake was 542kcal from rice, 70kcal from soup, 164kcal from side dish and 20kcal from kimchi. In conclusion, intake of most of the nutrients of students obtained from males in college foodservice were sufficient but calcium intake was insufficient and fat content was above 20% of energy. High fat consumption was due to side dishes from frying, grilling, roasting with animal food. To provide desirable meals in college foodservice, use of fat in cooking must be decreased.

• Journal of Biosystems Engineering
• /
• 제43권2호
• /
• pp.128-137
• /
• 2018

Purpose: This study was designed to elucidate the energy-utilization patterns for five methods of robo production. Methods: Robo (fried melon cake) was produced using five different methods, and the energy used for each unit operation was calculated using standard equations. The sensory attributes of the products were determined by panelists. Data were analyzed using descriptive analysis and analysis of variance at p < 0.05. Results: The energy demands for processing 2.84 kg of melon seed into robo (fried melon cake) using processes 1 (traditional method), 2, 3, 4, and 5 (improved methods) were 50,599.5, 21,793.6, 20,379.7, 21,842.9, and 20,429.3 kJ, respectively. These are equivalent to energy intensities of 1,7816.7, 7,673.8, 7,175.9, 7,691.2, and 7,193.4 kJ/kg, respectively. For the traditional process, the frying operation consumed the highest energy (21,412.0 kJ), and the mixing operation consumed the lowest energy (675.0 kJ). For the semi-mechanized processes, the molding operation consumed the highest energy (6,120.0 kJ), and the dry milling consumed the lowest energy (14.4 kJ). Conclusions: The energy-consumption patterns were functions of the type of unit operation, the technology involved in the operations, and the size of the equipment used in the whole processing operation. Robo produced via the milling of dried melon seed before oil expression was rated highest with regard to the aroma and taste quality, as well as the overall acceptability of the sensory evaluation, and required the lowest energy consumption. Full mechanization of the process line has potential for further reduction of the energy demand.

• Journal of Preventive Medicine and Public Health
• /
• 제17권1호
• /
• pp.289-294
• /
• 1984

The energy expended while playing tennis was determined from the players heart rate and from the amount of oxygen they consumed. This study was made using eight healthy but unathletic male college students. Expired air was collected for 2 minute periods during each game by the Douglas bag method. Samples were collected when serving and receiving. The air collected was measured using a wet test gas meter. The amount of air collected was expressed in STPD. Oxygen consumption was determined by measuring the oxygen content of the expired air with a Orzat gas analyzer. The energy expended during the tennis games was calculated indirectly. The caloric coefficient of oxygen was multiplied by the volume of oxygen consumed. The caloric coefficient of oxygen varied from 4.6 to 5.1 kcal/liter of oxygen. In this study the value of 5 kcal/liter of oxygen was used in the calculations. The accuracy of the measurements of energy expended was tested using regression analysis of the measured volume of oxygen. The mean values of heart rate, oxygen consumed and energy expended did not vary when the activity of serving and receiving was compared. The mean value of oxygen consumed during play was $1.4329{\pm}282ml/min$ or $21.6{\pm}4.0ml/kg/min$. The energy expended was $7.15{\pm}1.46kcal/min$ or $6.45{\pm}1.23kcal/kg/min$. The values were equivalent to 5.5 mets. When the levels of oxygen consumed were estimated using the formulas, they were found to be higher than the measured levels. The estimated amounts, however, were within 25% of the measured amounts.

• Journal of Nutrition and Health
• /
• 제41권4호
• /
• pp.317-326
• /
• 2008

This study was performed to investigate the effects of alcohol drinking frequency and foods consumed along with alcohol on anthropometry, serum lipid levels, and blood pressures in 73 male type 2 diabetic patients aged 30-59 years old. Dietary data for usual intake were obtained from the subjects by the 3-day food records. Separate data for foods consumed along with alcohol as accompaniment were collected and analyzed for energy and nutrient intakes. Both alcohol drinking frequency and/or the amount of energy consumed from accompaniment influenced clinical data as well as anthropometric measurements. The serum total- and HDL-cholesterol, triglyceride levels and systolic blood pressure were significantly higher in the group with a drinking frequency of ${\geq}$ 2/week than that of ${\leq}$ 1/week and also in the group whose daily energy intake from accompaniment was greater than the median (106.6 kcal/d) than that below the median. When the data were adjusted for age, amount of energy intake from alcohol and diet, the anothropometric measurements such as body weight, BMI, waist circumference were significantly higher in patients whose energy intake from accompaniment was greater than the median than that below the median. The results of our study suggest that both alcohol drinking frequency and the energy intake from foods consumed along with alcohol as accompanements are important contributing factors to clinical and anthropometric parameters whose associations with the cardiovascular complications are well established in patients with diabetes mellitus.

• 대한지역사회영양학회지
• /
• 제23권1호
• /
• pp.60-72
• /
• 2018

Objectives: This study was conducted to investigate the awareness of energy drinks, energy drink consumption behaviors, and associated factors among college students. Methods: A total of 536 students from three universities in Cheongju completed a self-administered questionnaire regarding awareness and consumption of energy drinks as well as general characteristics, health-related characteristics, and eating habits. Results: Approximately half of the respondents reported they knew what energy drinks were, while 45.7% had heard of energy drinks but did not know what they were. However, 76.9% had experience in using energy drinks. The main reason for using energy drinks was to stay awake, and the main place that they were used was on campus or at the library. More than 70% of energy drink users did not read the caffeine contents of energy drinks. After consuming energy drinks, 31.3% experienced adverse effects, the most serious being sleep disturbance. Approximately 33% of students consumed energy drinks once a month or more frequently, and men consumed energy drinks more frequently than females. Energy drink users who consumed at least one drink each month were more likely to be natural science major or drink more milk for male students, and to have more allowances or consume less meat for female students, compared with non-users. Conclusions: Our study showed that 33% of students consumed at least one energy drink each month, and there were a small number of students consumed energy drinks almost every day or energy drinks mixed with alcohol. Accordingly, college students should be taught potential health hazards of energy drinks mixed with alcohol as well as energy drinks alone. In addition, reading labels about caffeine and sugar contents in energy drinks is encouraged.

• Nutrition Research and Practice
• /
• 제8권1호
• /
• pp.81-93
• /
• 2014

This study was conducted to investigate nutrient consumption by Korean adults in various places. To accomplish this, we used the 1998-2009 Korea National Health and Nutrition Examination Survey (KNHANES). Subjects of this investigation were over 19 years and the study included 37,160 people. The meals were categorized as breakfast, lunch, dinner, and snacks consumed at home, or while eating-out. Investigation of the rate of consumption at serving places based on daily meals and years showed that eating-out generally increased with time. The consumption of meals prepared at home was higher than that of meals consumed anyplace else in 1998, 2001, 2005, and 2007-2009. However, the rate of consumption of home meals decreased from 1998 to 2007-2009, while the rate of eating-out increased during this period. Annual nutrient intake according to serving places with respect to meals, energy, fat, and sodium were significantly lower in home meals than those consumed elsewhere in 2007-2009 relative to 1998. The sodium intake and energy distribution ratio of fat in meals consumed while eating-out increased significantly from 1998 to 2007-2009. The energy, fat and sodium intake and energy contribution ratio of fat consumed in meals at institutions was significantly higher in 2007-2009 than in 1998. Based on these results, additional research is required to develop guidelines for dietary life improvement at each serving place and to address education and policies for balanced nutrition intake.

• Journal of Advanced Marine Engineering and Technology
• /
• 제11권4호
• /
• pp.33-40
• /
• 1987

Arc power is consumed energy per unit time between welding electrodes. The relations between consumed energy and electrode distance, current, voltage are nonlinear characteristics. Therefore commercial A.C. wattmeter cannot be used for measurement of the arc power. Most of arc energy measuring systems are developed for relay contact arc measurement. Relaly arc requires integrated instantaneous power because relay arc finishes in a short instant. But most of welding powers are continually consumed powers, therefore instantaneous power must be continually indicated in the form of averagy value. The author propose a new measurement method of power in which the current and voltage of welding electrode is multiplied and the resultant signal is passed to low pass filter in order to remove higher order frequency components. After integrating, the signal is devided by the integral interval and the results are stored in a computer memory.