• 한국기계가공학회지
• /
• 제14권2호
• /
• pp.38-43
• /
• 2015

Tungsten inert gas (TIG) welding is commonly used in industries that require airtightness, watertightness, oiltightness, and precision. It is a non-consumable welding method that is commonly used for the welding of non-ferrous metals, but it can be used to weld most metals. The methods of TIG welding can be divided into three types. The first, manual welding is done directly on the metal by a welder with a torch. The second, semi-automatic welding, gets help from a material supplying machine, but it is conducted by a welder. Lastly, automated welding is conducted fully by a machine during its process and operation. Depending on the selection of electrode, the amount of heat that is applied to the base material and the electrode rod changes and makes the shape of welded parts different. A direct-current positive electrode was used for this study. Through the change of shielding gas type on a structural steel (SS-400) that is commonly used in industry, the composition and shape changes in welded parts were detected after welding. The heat-affected area, hardness value, and tensile strength were also identified through hardness testing and tensile testing. In this study, it was found that the higher hardness value of the heat-affected is, the weaker the tensile strength becomes.

• 한국재료학회지
• /
• 제16권5호
• /
• pp.277-284
• /
• 2006

The alloys were prepared by a non-consumable vacuum arc melting and homogenized at $1050^{\circ}C$ for 24 hrs. Two kind of surface modifications were performed alkali treatment in 5.0M NaOH solution subsequent and heat treatment in vacuum furnace at $600^{\circ}C$, and were oxidizing treatment at the temperature range of 550 to $750^{\circ}C$ for 30 minutes. After surface modification, these samples were soaked in SBF which consists of nearly the same ion concentration as human blood plasma. Cytotoxicity tests were performed in MTT assay treated L929 fibroblast cell culture, using indirect methods. A porous and thin activated layer was formed on Titanium and Ti-8Ta-3Nb alloy by the alkali treatment. A bone-like hydroxyapatite was nucleated on the activated porous surfaces during the in vitro test. However, Ti-8Ta-3Nb alloys showed better bioactive properties than Titanium. According to XRD results, oxide layers composed of mostly $TiO_2$(rutile) phases. Cytotoxicity test also revealed that moderate oxidation treatment lowers cell toxicity and Ti-8Ta-3Nb alloy showed better results compared with Titanium.

• 한국항해항만학회지
• /
• 제44권4호
• /
• pp.354-361
• /
• 2020

"선용품" 이라는 용어는 일반적으로 선박에서 사용되는 모든 관련 기계적 부속품과 소모성 자재를 통칭하는 용어이다. 선박은 원양을 운항하기에 긴급 상황에서 선용품에 대한 수요가 발생할 경우 긴밀하게 대응하기가 쉽지 않다. 특히, 부정기선의 경우 더욱 선용품의 보급계획을 예측하기 어려우므로 적정 보급지를 결정하는 것은 어려운 일이다. 본 연구는 각 선주사 및 선박관리업체를 대상으로 한 설문 조사를 통해 부정기선박의 보급지 결정 시 고려되는 요소와 중요도를 파악하였다. 이를 통해 각 국가별, 항만별 공급절차를 제시하였고, 이를 통해 효율적인 선용품 보급 물류 방식을 제안하였다.

• 대한치과기공학회지
• /
• 제26권1호
• /
• pp.97-104
• /
• 2004

A new Ti-10Ta-10Nb alloy has designed and examined some possibility of forming more passive oxide film by oxidation treatment which is closely related to corrosion resistance and biocompatibility. Ti-6Al-4V and Ti-10Ta-10Nb alloys were prepared by consumable vacuum arc melting and homogenized at 1050$^{\circ}C$ for 24hours. Alloy specimens were oxidized at the temperature range of 400 to 750$^{\circ}C$ for 30minutes, and the oxide films on Ti alloys were analysed by optical microscope, SEM, XPS and TGA. Cytotoxicity test was performed in MTT assay treated L929 fibroblast cell culture by indirect method. It is found out that the oxide film on Ti-10Ta-10Nb alloy is denser and thinner compared to Ti-6Al-4V alloy. The weight gain during the oxidation was increased rapidly at the temperature above 650$^{\circ}C$ for Ti-6Al-4V alloy and above 700$^{\circ}C$ for Ti-10Ta-10Nb alloy respectively. It was analysed that the passive film of the Ti alloys consisted of TiO2 through X-ray photoelectron spectroscopy (XPS) analysis. It is found out by cytotoxicity test that moderate oxidation treatment lowers cell toxicity, and Ti-10Ta-10Nb alloy showed better result compared to Ti-6Al-4V alloy.

• Journal of Preventive Medicine and Public Health
• /
• 제29권2호
• /
• pp.215-225
• /
• 1996

Decentralization to local governments and amending of Health Center Law are to promote the efforts of health planning at the level of local agencies. In the health facility planning, it is important to take into account that what to be built, where to be located, how far should be service area and so forth, because health facilities are immovable, and require capital as well as personnel and consumable supplies. The aim of our study, answering to the question of 'where to be located?', is to determine the best location of urban health sub-center. At the local level, planning is the matter of finding the best location of specific facilitiy, in relation to population needs. We confine the accessibility, which is basic to location planning, to geographic one. Location-Allocation Model is used to solve the problem where the location is to maximize geographic accessibility. To minimize the weighted travel distance, objective function, $R_k=\sum{\sum}a_{ij}w_{i}d_{ij}$ is used. Distances are measured indirectly by map measure-meter with 1:25,000 Suwon map, and each potential sites, 10 administrative Dongs in Kwonson Gu, Suwon, are weighted by each number of households, total population, maternal age group, child age group, old age group, Relief for the livelihood, and population/primary health clinics. We find that Kuwoon-Dong, Seodun-Dong, Seryu3-Dong, according the descending orders, are best sites which can minimize the weighted distance, and conclude that it is reasonable to determine the location of urban health sub-center among those sites.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.70-70
• /
• 2010

In the present study, to estimate the mechanical properties of 800 MPa grade weld metal, welding was carried out using 800 and 600 MPa grade flux cored arc welding (FCAW) consumable and characteristics of the weld metals were investigated. The chemical composition of weld metals was investigated by an optical emission spectroscopy (OES) method. The microstructure of weld metals was analyzed by optical microscopy (OM) and secondary electron microscopy (SEM). The compositions and sizes of inclusions which are the dominant factors for the nuclei of acicular ferrite were analyzed by an transmission electron microscopy (TEM). In addition, mechanical properties of the weld metals were evaluated through tensile tests and charpy impact tests. Mostly the acicular ferrite phase which has high strength and toughness was observed. The 600 MPa grade weld metal was consisted of 75% acicular ferrite and 25% ferrite which was formed at high temperature (grain boundary ferrite, widmanstatten ferrite, polygonal ferrite). However, the 800 MPa grade weld metal was composed of about 73% acicular ferrite and 27% low temperature phase (bainite, martensite). Toughness was considerably decreased due to the increase of tensile strength (from 600 MPa to 800 MPa). The sizes of inclusions which were observed in both weld metal were $0.4{\sim}0.8\;{\mu}m$, it is effective size to form acicular ferrite.

• Journal of Welding and Joining
• /
• 제31권5호
• /
• pp.35-40
• /
• 2013

In this paper, we propose the Tangible Virtual Reality Representation Method to using haptic device and feature to morphology of created bead from Flux Cored Arc Welding. The virtual reality was started to rising for reduce to consumable materials and welding training risk. And, we will expected maximize virtual reality from virtual welding training. In this paper proposed method is get the database to changing the input factor such as work angle, travelling angle, speed, CTWD. And, it is visualization to bead from extract to optimal morphological feature information to using the Neural Network algorithm. The database was building without error to extract data from automatic robot welder. Also, the Neural Network algorithm was set a dataset of the highest accuracy from verification process in many times. The bead was created in virtual reality from extract to morphological feature information. We were implementation to final shape of bead and overlapped in process by time to using bead generation algorithm and calibration algorithm for generate to same bead shape to real database in process of generating bead. The best advantage of virtual welding training, it can be get the many data to training evaluation. In this paper, we were representation bead to similar shape from generated bead to Flux Cored Arc Welding. Therefore, we were reduce the gap to virtual welding training and real welding training. In addition, we were confirmed be able to maximize the performance of education from more effective evaluation system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권12호
• /
• pp.5842-5861
• /
• 2019

A current autonomous vehicle determines its driving strategy by considering only external factors (Pedestrians, road conditions, etc.) without considering the interior condition of the vehicle. To solve the problem, this paper proposes "An Optimal Driving Support Strategy(ODSS) based on an Genetic Algorithm for Autonomous Vehicles" which determines the optimal strategy of an autonomous vehicle by analyzing not only the external factors, but also the internal factors of the vehicle(consumable conditions, RPM levels etc.). The proposed ODSS consists of 4 modules. The first module is a Data Communication Module (DCM) which converts CAN, FlexRay, and HSCAN messages of vehicles into WAVE messages and sends the converted messages to the Cloud and receives the analyzed result from the Cloud using V2X. The second module is a Data Management Module (DMM) that classifies the converted WAVE messages and stores the classified messages in a road state table, a sensor message table, and a vehicle state table. The third module is a Data Analysis Module (DAM) which learns a genetic algorithm using sensor data from vehicles stored in the cloud and determines the optimal driving strategy of an autonomous vehicle. The fourth module is a Data Visualization Module (DVM) which displays the optimal driving strategy and the current driving conditions on a vehicle monitor. This paper compared the DCM with existing vehicle gateways and the DAM with the MLP and RF neural network models to validate the ODSS. In the experiment, the DCM improved a loss rate approximately by 5%, compared with existing vehicle gateways. In addition, because the DAM improved computation time by 40% and 20% separately, compared with the MLP and RF, it determined RPM, speed, steering angle and lane changes faster than them.

• 한국전기전자재료학회논문지
• /
• 제29권8호
• /
• pp.483-488
• /
• 2016

Ultrasound imaging by using piezoelectric materials, such as lead zirconium titanate (PZT) has been one of the most preferred modes of imaging in the medical field due to its simple, low cost and non-ionizing radiation in comparison to other imaging techniques. Recently, the market demand for portable ultrasound is becoming larger with applications in developing countries, disaster area, military, and emergency purposes. However, most of ultrasound probes used is bulky and high power consumable, so unsuitable for such applications. In this study, the 3 layered ceramic specimen consisted of 128 pitches of $420{\mu}m$ in width and $450{\mu}m$ in thickness were prepared by using the Ti-rich PZT compositions co-fired at $1,050^{\circ}C$. Their electrical and ultrasound pulse-echo properties were investigated and compared to the single layer specimen. The 3 layered ultrasound probe showed 1.584 V of Vp-p, which is 3.2 times higher than single layered one, implying that it would allow effectively such a portable ultrasound probe system. The result were discussed in terms of higher capacitance, lower impedance and higher dielectric coefficient of the 3 layered ultrasound probe.

• 청정기술
• /
• 제17권3호
• /
• pp.191-200
• /
• 2011

재생 가능한 자원으로 만들어지는 천연고분자, 바이오 고분자 및 합성고분자들은 지속가능하며 환경 친화적인 플라스틱으로 21세기 화두가 되고 있으나 많은 양의 썩지 않는 석유화학 유래 플라스틱이 사용되고 있다. 최근 들어 세 가지 관점에서 생분해성 고분자들이 많은 관심을 받고 있다: 1. 채취하기 쉬운 자원의 고갈에 따른 석유제품의 가격상승, 2. 폐플라스틱에 대한 환경 및 경제적인 관심, 3. 석유화학 유래 재료의 제조에 따른 이산화탄소배출. 이러한 관점에서 제조공정상에서 이산화탄소를 저감할 수 있는 poly(hydroxy alkanoate)나 poly(lactide)와 같은 생분해성 고분자에 대한 상업적 응용에 대한 관심이 고조되고 있다. 이들 고분자들은 초기분해가 진행됨에 따라 급격히 기계적 물성을 상실하기 때문에 상업적 응용을 위하여서는 분해거동이 중요하다. 본 총설에서는 초기분해속도의 조절을 위한 고분자 개질에 대한 최근의 연구동향을 살펴보았다.