• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.113-120
• /
• 2005

Soil nailing system can be mentioned to a method of supporting as the shear strength of in-situ soils is increased by passive inclusions. In the general soil nailing system, facing walls are used in two kind of a lattice concrete block or a cast in placed concrete wall. A case of lattice concrete blocks is used in slow slopes greater than 1:0.7. Also, a case of a cast in placed concrete wall is used in steep slopes less than 1:0.5. The cast in placed concrete walls are constructed to 30cm thick together with a shotcrete facing. In this study, the assembling soil nailing method as a new soil nailing system is proposed. This method is constructed assembly using precast concrete panels. Therefore ability of the construction and quality of the facings can be modified than a usual soil nailing system. Also, this method can be obtained the effects that a global slope stability increase, as precast concrete panels is put on cutting face after excavating a slope.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.807-814
• /
• 2004

Land seismic reflection survey has been increasingly demanded in various civil engineering works because of its own ability to delineate layers, water table, to detect cavities or fracture zones, to estimate seismic velocities of each layer. However, our shallow subsurface structures are very complex. The relatively thin layer(mostly soil) to the wavelength directly followed by a basic rock with high impedance used to generate complicated surface waves, kind of channel waves with high amplitude that is dominate in entire seismograms and hence the useful reflection events will be almost hopelessly immersed in the undesired surface waves. Thus, it would seem that the use of traditional seismic survey could not be likely to provide in itself a satisfactory information about our exploration targets. This paper hence introduces an efficient measuring strategy illustrating a properly controlled arrangement of the vertical single force sources commonly used, yielding a very sharply elongated form of P-energy with a minimum of S radiation energy, what we call, P-beam source. Abundant experiments of physical modeling showed that in that way the surface waves could be enormously reduced and the reflection events would be additive and thus reinforced. Examples of field data are also illustrated. The contribution of P-beam source will be great in civil engineering area as well as in general geological exploration area.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.4
• /
• pp.53-61
• /
• 2011

This study examined evaluation on stabilization of major and trace elements in tailings by various surface water-preventing materials. Six columns were filled with tailings of the Sinlim mine, then covered with tailings only, compacted soils, clay, soil-bentonite mixture, pozzolan and bentonite mat. After injection of artificial rain water, the leachate was sampled with times (3, 6, 9 and 12 pore volume) and analysed for major (Ca, Na, Mg, K) and trace elements (As, Cd, Cu, Pb, Zn) by ICP-AES. With exception to pozzolan type, the pH values of leachate from the other types became stabilized from 5.5 to 7.5, and EC (electric conductivity) of leachate from them decreased with times. For the pozzolan type, however, the pH and EC of leachate increased with time due to its alkalinity producing system. Concentrations of most major and trace elements in leachate decreased and stabilized with time. Consequently, soil-bentonite mixed cover shows the best ability of water-preventing and reducing mobility of elements in tailings site.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.1100-1109
• /
• 2006

In this study, two different technologies which can measure temperature simultaneously at many points are introduced. One is to use a thermal sensor cable that is comprised of addressable thermal sensors connected in parallel within a single cable. The other is to use an optic fiber with Distributed Temperature Sensing (DTS) system. The difference between two technologies can be summarized as follows. A thermal sensor cable has a concept of 'point sensing' that can measure temperature at accurate position of a thermal sensor. So the accuracy and resolution of temperature measurement are up to the ability of the thermal sensor. Whereas optic fiber sensor has a concept of 'distributed sensing' because temperature is measured by ratio of Stokes and anti-Stokes component intensities of Raman backscatter that is generated when laser pulse travels along an optic fiber. It's resolution is determined by measuring distance, measuring time and spatial resolution. The purpose of this study is that application targets of two temperature measurement techniques are checked in technical and economical phases by examining the strength and weakness of them. Considering the functions and characteristics of two techniques, the thermal sensor cable will be suitable to apply to the assessment of groundwater flow, geothermal distribution and grouting efficiency within 300m distance. It is expected that the optic fiber sensor can be widely utilized at various fields (for example: pipe line inspection, tunnel fire detection, power line monitoring etc.) which need an information of temperature distribution over relatively long distance.

• Korean Journal of Hospice Care
• /
• v.3 no.1
• /
• pp.12-30
• /
• 2003

We all human beings, should be reached the terminal of life in the world. There is the only difference between that comes suddenly or slowly. Persons who should be come the terminal stage suddenly due to disease, especially, malignancy, are Hospice patients. Hospice work is the work of all of us because anyone, anywhere, whenever can be suffered in terminal stage. The characters of Hospice-care are total care of wholistic human beings, comprehensive total assessment of the life and the team work composed of diverse team-members, for example, doctors, nurses, social workers, physical therapists, psychologists, ministers & volunteers. The care manager of the total care(the coordinator of Hospice care), should be worked systemically and, rationally. The comprehensive assessment concept should be entered to the infra-consultant of terminal care-program. The care manager should be have the ability of comprehensive assessment for terminal patients. It will also help standardization of Hospice, and application of medical insurance and social security.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.111-112
• /
• 2012

The purpose of this study is to evaluate a defect in apartment buildings as review a safety investigation and consult a defect. As a result to compare a safety investigation to consult a defect, they are almost similar in spite of the purpose and the scope of evaluation are different. Therefore, it needs to establish a special and systemic system, and follow an organized effort about raising a consultant and improving an ability.

• Information Systems Review
• /
• v.11 no.1
• /
• pp.107-132
• /
• 2009

The purpose of this research is to define the consulting competence of IT consultants and empirically analyze the perceptual differences between the IT consultant group and the client group. Based on the previous researches and the opinion of the actual IT consultants, the consulting capability model has been established, which consists of six categories and eighteen factors. Six categories are (1) IT domain expertise, (2) problem solving ability, (3) project management capability, (4) communication skills, (5) human relations skills, and (6) professional ethics and attitude. Two field surveys have been performed and the responses of 174 IT consultants 116 clients have been acquired. It is shown that the level of possessed proficiency of IT consulting capability is far lower than the level of the required proficiency. And there exist the perceptual difference between two responding groups with respect to the level required proficiency but no difference exists in terms of the level of possessed proficiency. The findings of this research can provide some useful information in order to fully understand the differences between the IT consultant group and the client group.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.19 no.3
• /
• pp.162-167
• /
• 2016

Purpose: To determine the socio-economic impact of gluten free diet (GFD) on Saudi children and their families Methods: A cross-sectional study was conducted in which an online questionnaire was sent to all families registered in the Saudi celiac patients support group. We included only children (age 18 years of age and younger) with biopsy-confirmed celiac disease (CD). Results: A total of 113 children were included in the final analysis, the median age was 9.9 years; 62.8% were females. One hundred (88.5%) of the participating families reported that GFD food was not easily available in their areas, 17% of them reported that it was not available at all in their area. One hundred and six (93.8%) reported that the price of GFD food was very expensive and 70 (61.9%) families that the diet was heavily affecting their family budget. Significant social difficulties were reported among the participating families and their children including interference with the child's interaction with other children (49.6%), the families' ability to attend social gatherings (60.2%), the families' ability to eat in restaurants (73.5%), and the families' ability to travel (58.4%). Conclusion: There is significant negative socio-economic impact of GFD on children with CD & their families. Health care providers should be aware of these psycho-social difficulties and be well trained to provide a proper education and psychological support for these patients and their families.

• Journal of vocational education research
• /
• v.35 no.4
• /
• pp.131-153
• /
• 2016

The purpose of this study was to derive evaluator's role and capability for institution accreditation evaluation of NCS-based vocational competency development training. This study attempted to explore in various ways evaluator's minute roles using Delphi method, and to derive knowledge, skill, attitude and integrity needed to verify the validity. To the end, this study conducted the Delphi research for over three rounds by selecting education training professionals and review evaluation professions as professional panels. From the results, roles of evaluators were defined as the total eight items including operator, moderator-mediator, cooperator, analyzer, verifier, institution evaluator, institution consultant, and learner, and the derived capabilities with respect to each role were 25 items in total. The area of knowledge included four items of capabilities such as HRD knowledge, NCS knowledge, knowledge of vocational competency development training, and knowledge of training institution accreditation evaluation, and the area of skill comprised fourteen items of capabilities such as conflict management ability, interpersonal relation ability, word processing ability, problem-solving ability, analysis ability, pre-preparation ability, time management ability, decision making ability, information comprehension and utilization ability, comprehensive thinking ability, understanding ability of vocational competency development training institutions, communication ability, feedback ability, and core understanding ability. The area of attitude was summarized with the seven items in total including subjectivity and fairness, service mind, sense of calling, ethics, self-development, responsibility, and teamwork. The knowledge, skill and attitude derived from the results of this study may be utilized to design and provide education programs conducive to qualitative and systematic accreditation and assessment to evaluators equipped with essential prerequisites. It is finally expected that this study will be helpful for designing module education programs by ability and for managing evaluator's quality in order to perform pre-service education and in-service education according to evaluator's experience and role.

• Journal of the Korea Safety Management & Science
• /
• v.21 no.3
• /
• pp.1-9
• /
• 2019

The Industrial Innovation Movement, based on win-win cooperation with SMEs, is a structure that enables suppliers who have struggled with corporate growth through productivity innovation due to poor manufacturing environment and lack of innovation. To this end, consultants and technical experts will support production innovation activities to improve production methods and improve productivity through process and management consulting. The purpose of this study was to explore the driving factors of the industrial innovation movement to improve the corporate ecosystem by improving the productivity of SMEs using modified IPA. The research results are as follows. First, in order to revitalize the Industrial Innovation Movement, the CEO-related elements of the participating companies should be maintained and strengthened. The motivation, education support, innovation organizational culture, the establishment of an innovation promotion system requires centralization of efforts for improvement. Second, in order to revitalize the Industrial Innovation Movement, the consultant's ability to analyze problems and suggest alternatives should be continuously strengthened. Third, in terms of the Central Promotion Headquarters, it was found that the Industrial Innovation Movement would be successful if the public information, industrial inspection for benchmarking, and provision of various information to support innovation activities were urgently improved.