• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.149-150
• /
• 2012

According to the increase of demand of the deteriorated building. The interest of the building's maintenance is continually increased, so studies about how to increase building's stability & prolonged life span are increased. This study's purpose is to maintain building's function, so we suggest a protocol type system of UI to estimate reasonable planning of demand of repair & replacement and to distribute budget.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.65-68
• /
• 2007

DOCSIS 3.0 MAC protocol regulate CM and CMTS Channel transfer times through MAP message. Standards does not include the details of MAP Inter-arrival Time affecting the performance of MAC protocols for DOCSIS 3.0. In this paper, we evaluationed the performance of protocol follow in MAP Inter-arrival Time on DOCSIS 3.0. Based on the evaluation results, we propose the optimal MAP Inter-arrival Time. We found that the protocol shows best performance when the MAP Inter-arrival Time is 0.05sec. The research results can apply to performance element which important for the construction of DOCSIS 3.0 base cable networks.

• ETRI Journal
• /
• v.22 no.1
• /
• pp.30-37
• /
• 2000

Existing tree construction mechanisms are classified into source-based trees and center-based trees. The source-based trees produce a source-rooted tree with a low delay. However, for the applications with multiple senders, the management overheads for routing tables and resource reservations are too high. The center-based trees are easy to implement and manage, but a priori configuration of candidate center nodes is required, and the optimization mature such as tree cost and delay is not considered. In this paper, we propose a new multicast tree building algorithm. The proposal algorithm basically builds a non-center based shared tree. In particular, any center node is not pre-configured. In the purposed algorithm, a multicast node among current tree nodes is suitably assigned to each incoming user: Such a node is selected in a fashion that tree cost and the maximum end-to-end delay on the tree are jointly minimized. The existing and proposed algorithms are compared by experiments. In the simulation results, it is shown that the proposed algorithm approximately provides the cost saving of 30% and the delay saving of 10%, compared to the existing approaches. In conclusion, we see that the cost and delay aspects for multicast trees can be improved at the cost of additional computations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.7
• /
• pp.1357-1362
• /
• 2009

The multimedia contents are diffused rapidly. Also, the course individual service of communication and broadcasting coexists with each other and develop to the integrated fusion service with development of the high speed broadband IP network technology. The IPTV which is representative broadcasting a communication total service is the powerful application field. The communication industry has been interested in data processing of the high-definition that supports many kinds of internet service by internet protocol. In this paper, we configure the standard routing protocol use in the small scaled, on RIP environment and the link status routing protocol use the large scale autonomous network, on OSPF environment. We also measure and evaluate broadcasting quality by PSNR(Peak Signal-to-Noise Ratio). Finally, we propose the network construction plan for IPTV services which are efficient.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.12
• /
• pp.455-462
• /
• 2016

Wireless sensor networks have been researched to gather data about events on sensor fields from sources at sinks. Multipath routing is one of attractive approaches to reliably send data against the problem of frequent breakages on paths from sources to sinks due to node and link failures. As mobile events such as humans, animals, and vehicles are considered, sources may be continuously generated according to the movement of the mobile event. Thus, mobile events provide new challenging issue in multipath routing. However, the research on multipath routing mainly focus on both efficient multipath construction from sources to static sinks and fast multipath reconstruction against path breakages. Accordingly, the previous multipath routing protocols request each source continuously generated by a mobile event to construct individual multipath from the source to sinks. This induces the increase of multipath construction cost in the previous protocols in proportion to the number of source. Therefore, we propose efficient multipath routing protocol for supporting continuous sources generated by mobile events. In the proposed protocol, new source efficiently reconstructs its multipath by exploiting the existing multipath of previous sources. To do this, the proposed protocol selects one among three reconstruction methods: a local reconstruction, a global partial one, and a global full one. For a selection decision, we provide an analytical energy consumption cost model that calculates the summation of both the multipath reconstruction cost and the data forwarding cost. Simulation results show that the proposed protocol has better performance than the previous protocol to provide multipath routing for mobile events.

• KIEAE Journal
• /
• v.8 no.5
• /
• pp.69-76
• /
• 2008

Recent industrial development and technological breakthroughs have made our life much more convenient, however, at the cost of environmental degradation resulting from indiscreet focus on development in combination of disregard of impact on eco system. Notably, global warming is one of the most serious environmental issues, triggering attention for environmental protection in Korea and elsewhere. To address such issues, nations around the world are beefing up environmental regulatory framework such as UNFCCC(United Nations Framework Convention on Climate Change) to tackle environmental challenges from global perspective. Against the backdrop, Korea has been engaging actively in global initiatives to reduce climate change, ratifying UNFCCC in 1993 and the Kyoto Protocol in October, 2002. However, unlike the government responding to environmental degradation in earnest, construction industry is far from making efforts to reduce wastes. Construction waste is a source of environmental deterioration world wide and adds to the aggregate cost that construction companies should assume. Korean construction firms also need to develop initiative aggressively to respond to changes in environmental policies and reduce construction costs. Therefore, this study aims at examining sources of wastes in construction sites and suggest solution in order to prod local construction companies to develop countermeasures.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.5
• /
• pp.1589-1597
• /
• 2014

For several decades, economic growth has achieved in the aspect of productivity and effectiveness not environmental friendly. As a result, global warming is a major agenda to solve. Therefore, global effort to sustainable development has been adopted like UNFCCC and Kyoto protocol that aimed to reduce greenhouse gas. However, the construction industry has only focused on applying techniques for using less energy sources not monitoring sustainable construction and development. Therefore, this study developed a tool for monitoring greenhouse gas emissions in construction industry. The proposed system evaluates and estimates BAU (Business as usual) for each phase of a construction project. For this purpose, analyzed the greenhouse gas emission factors coincide to life cycle of a construction project. The scope of monitoring is determined according to data availability and emission factor. Then, the system framework is developed and the calculation logic is proposed the system features provide comparison between the emission estimates for eco-friendly design and the actual emission of construction and operation phases. The system would be utilized as a tool for supporting to green construction realization and green construction performance evaluation.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.200-201
• /
• 2021

According to the dispute cases filed for claiming the collective defect repair fees, inter-layer concrete joints turned out to be the most frequently disputed item. For this reason, this study selects the inter-layer concrete joints to further analyze the primary causes and details of each dispute case. From the results of this study, three primary causes of the disputes are found, which are 1) the absence of standard specifications for construction quality control and management after construction; 2) the absence of established standards for repair when construction defects are found. In order to prevent construction defects in inter-layer concrete joints, this study provides three suggestions including 1) the current standard specifications for inter-layer concrete joints should be further specified by the Ministry of Land, Infrastructure and Transport; 2) a construction defect should be judged according to the compliance to the standard specifications; and 3) a clear and institutional protocol needs to be established for defect repair in cases that new public apartment houses have been judged to have defects.

• Journal of the Korean Professional Engineers Association
• /
• v.29 no.5
• /
• pp.99-103
• /
• 1996

In this paper we discuss Gigabit information communication service utilizing Gigabit information super-highway, multimedia data processing technology for the services, multimedia communication protocol for transmitting multimedia data and construction of Gigabit information communication network which can be accessed everywhere and present items which should be tactically prepared for high-level information society of the 21 st century.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8B
• /
• pp.539-546
• /
• 2007

For better performance and to avoid member service annoyance that results due to joining-clients' waiting durations and time-outs when there are more than one client wanting to join concurrently for Personal Broadcasting System service, there is a need for improving concurrent member joining mechanism. For a more efficient and better performing, this paper apply Overlay Multicast based mini-Overlay Broadcasting Control Protocol(mOBCP) Algorithm on Personal Broadcasting System. mOBCP proposed is performance-effective mechanism, since it considers the case of how fast will children, concurrently, find and join new parents when paths to existing parents are in Failure. The performance comparison, in terms of tree construction time variation and Latency are done through simulations and the results conclude in favour of the Proposed mOBCP.