• Convergence Security Journal
• /
• v.24 no.1
• /
• pp.59-68
• /
• 2024

With advancements in artificial intelligence technology, intelligent CCTV systems are being deployed across various environments, such as river bridges and construction sites. However, a conflict arises regarding the opening and closing of rooftop access points due to concerns over potential accidents and crime incidents and their role as emergency evacuation spaces. While the relevant law typically mandates the constant opening of designated rooftop access points, closures are often tacitly permitted in practice for security reasons, with a lack of appropriate legal measures. In this context, this study proposes a detection system utilizing intelligent CCTV to respond to emergencies that may occur on rooftops. We develop a system based on the YOLOv5 object detection model to detect assault and suicide attempts by jumping, introducing a new metric to assess them. Experimental results demonstrate that the proposed system rapidly detects assault and suicide attempts with high accuracy. Additionally, through a legal analysis of rooftop access point management, deficiencies in the legal framework regarding rooftop access and CCTV installation are identified, and improvement measures are proposed. With technological and legal improvements, we believe that crime and accident incidents in rooftop environments will decrease.

• Animal Bioscience
• /
• v.37 no.7
• /
• pp.1168-1176
• /
• 2024

Objective: As a charismatic species, cashmere goats have rich genetic resources. In the Inner Mongolia Autonomous Region, there are three cashmere goat varieties named and approved by the state. These goats are renowned for their high cashmere production and superior cashmere quality. Therefore, it is vitally important to protect their genetic resources as they will serve as breeding material for developing new varieties in the future. Methods: Three breeds including Inner Mongolia cashmere goats (IMCG), Hanshan White cashmere goats (HS), and Ujimqin white cashmere goats (WZMQ) were studied. IMCG were of three types: Aerbas (AEBS), Erlangshan (ELS), and Alashan (ALS). Nine DNA samples were collected for each population, and they were genomically re-sequenced to obtain high-depth data. The genetic diversity parameters of each population were estimated to determine selection intensity. Principal component analysis, phylogenetic tree construction and genetic differentiation parameter estimation were performed to determine genetic relationships among populations. Results: Samples from the 45 individuals from the five goat populations were sequenced, and 30,601,671 raw single nucleotide polymorphisms (SNPs) obtained. Then, variant calling was conducted using the reference genome, and 17,214,526 SNPs were retained after quality control. Individual sequencing depth of individuals ranged from 21.13× to 46.18×, with an average of 28.5×. In the AEBS, locus polymorphism (79.28) and expected heterozygosity (0.2554) proportions were the lowest, and the homologous consistency ratio (0.1021) and average inbreeding coefficient (0.1348) were the highest, indicating that this population had strong selection intensity. Conversely, ALS and WZMQ selection intensity was relatively low. Genetic distance between HS and the other four populations was relatively high, and genetic exchange existed among the other four populations. Conclusion: The Inner Mongolia cashmere goat (AEBS type) population has a relatively high selection intensity and a low genetic diversity. The IMCG (ALS type) and WZMQ populations had relatively low selection intensity and high genetic diversity. The genetic distance between HS and the other four populations was relatively high, with a moderate degree of differentiation. Overall, these genetic variations provide a solid foundation for resource identification of Inner Mongolia Autonomous Region cashmere goats in the future.

• Journal of Space Technology and Applications
• /
• v.4 no.1
• /
• pp.27-47
• /
• 2024

In the New space era, satellites are being developed to perform on-orbit service (OOS) missions. Various missions for orbital service include failure repair, refueling, towing, component replacement, and space construction, and in order to do so, a robot arm payload must be mounted. Unlike conventional satellite payloads, the robot arm payload is not move in a fixed state, but is a payload that must move continuously to perform the mission. It is also characterized by the need to perform the mission while being directly exposed to outer space, rather than existing inside the structure of the satellite. Due to the characteristics of these payloads, thermal design and interpretation that can be operated smoothly in an extreme space thermal environment is essential, but there are not many papers on thermal design and interpretation of the robot arm. This paper introduces and summarizes cases of thermal design and interpretation of robot arm payloads developed so far, and finally, it intends to suggest directions for thermal design and interpretation of robot arm payloads to be developed in the future.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.5
• /
• pp.195-200
• /
• 2024

The purpose of this study is to propose optimized cognitive warfare strategies for the Korean Peninsula by analyzing recent war case studies. Through the analysis of the Armenia-Azerbaijan war, the Israel-Palestine conflict, the Ukraine-Russia war, and the Israel-Hamas conflict, it was found that the following aspects are crucial in conducting cognitive warfare: 1) applying methods according to objectives, 2) organizing and structuring appropriately to the objectives and means, and 3) utilizing various means from both civilian and military sectors. Based on these findings, cognitive warfare strategies optimized for the operational environment of the Korean Peninsula were suggested in terms of the three elements of military innovation. From the aspect of methodology, it is recommended to develop cognitive warfare scenarios based on legitimacy and legality, and to integrate roles according to the level of warfare. Regarding organization and structuring, the establishment of a national-level control tower and the construction of an integrated response system involving civilians, government, military, and police based on legislation are proposed. In terms of means, it is suggested to utilize various tools from the civilian, government, military, and police sectors, such as North Korean defectors, psychological warfare broadcasts against North Korea, social media, and cyber operations, for auditory, visual, and message delivery. In future battlefields characterized by hyper-connectivity and hyper-intelligence, the execution of cognitive warfare will become increasingly important. Therefore, it is necessary to continuously develop optimized cognitive warfare strategies for the Korean Peninsula through comprehensive national efforts.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.1
• /
• pp.143-155
• /
• 2018

The Natural Landscape Rating System was introduced in the amendment of the NATURAL ENVIRONMENT CONSERVATION ACT in 2006. For landscape preservation, the system aims to consider the effects of development projects or plans implemented in a natural landscape on skylines, scenic resources, and view corridors. Currently, a lack of consistency in standards for determining Landscape Control Points (LCP) to assess landscape impact lowers the accuracy and reliability of the assessment results. As the perception of and the impact on a landscape varies, depending on the location of the LCP, it is necessary to establish a reasonable set of criteria to select viewpoints and avoid unreliability in the assessment due to unclear criteria. The intent of this study is to propose an objective and reasonable set of criteria for LCP selection to effectively measure the impact on the landscape from development projects that anticipate a change in the landscape and, ultimately, to suggest basic analysis methods to assess the landscape impact of development projects and to monitor the landscape in the future. Among the development projects affecting natural landscapes, as reported in the statement of the environmental impact assessment, cases of construction of a single building or other small-scale development projects were studied. Four spot development projects were analyzed in depth for their landscape impacts, in order to make recommendations for the LCP selection procedure, which aims to widen the scope of selection according to the direction of viewpoints from the target site. The existing results of analysis based on LCP have limitations because they failed to cover the viewshed of the target buildings when there are topographical changes in the surroundings. As a solution to this problem, a new viewshed analysis method has been proposed, with a focus on the development site and target buildings, rather than viewpoints, as used in past analysis.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.3
• /
• pp.44-55
• /
• 1987

In order to study the effect of sawdustboard combined with plastic chips, 0.5mm($T_1$), 1mm($T_2$), 1.4mm($T_3$) thick nylon fiber. polypropylene rope fiber(RP), and 0.23mm thick moth-proof polypropylene net fiber(NP) were cut into 0.5, 1, 2cm long plastic chips. Thereafter, sawdustboard combined with plastic chips prepared as the above and plastic non-combined sawdustboard(control) were manufactured into 3 types of one-, two-, and three layer with 5 or 10% combination level. By the discussions and results at this study, the significant conclusions of mechanical and physical properties were summarized as follows: 1. The MORs were shown in the order of 3 layer> 2 layer> 1 layer among plastic non-combined boards, and $T_3$ < $T_2$ < $T_1$ < RP (NP(5%) < NP(l0%) among plastic combined boards. In 2cm long plastic chip in 1 layer board, the highest strength through all the composition was recognized. 1 layer board showing the lower strength with 0.5cm plastic chip rendered to the bending strength improvement by 2 or 3 layer board composition. On the other hand, 2 or 3 layer combined with 1, 2cm long polypropylene net fiber chips incurred MOR's conspicuous decrease requiring optimum plastic chip combined level and consideration to combined type. 2. MOE in plastic non-combined 3 layer board exhibited sandwich construction effect by higher resin content application to surface layer in the order of 3layer>1layer>2layer with the highest stiffness of the board combined with polypropylene chip, while nylon chip-combined board had little difference from plastic non-combined board. In relevant to length and layer effect, 3 layer board combined with the 0.5cm long polypropylene net fiber chip in 5% and 10% combined level presented 34-43% and 44-76% stiffness increase against plastic non-combined board(control), respectively. Moreover, in 1 layer board, 30% stiffness increase with 10% against 5% combined level in the 1 and 2cm long polypropylene net fiber chip was obtained. 3. Stress at proportional limit(Spl) showing the fiber relationship (r: 0.81-0.97) between MOR presented in the order of 1 layer<2 layer<3 layer in plastic non-combined board. Correspondingly, combined effect by layer and plastic chip length was similar to MOR's. 4. Differently from previous properties(MOR, MOE, Spl). work to maximum load(Wml) of 2 layer board approached to that of 3 layer board. Conforming the above phenomenon. 2 layer combined with 0.5cm long polypropylene net fiber chip kept the greater work than 1 layer. The polypropylene combined board superior to nylon -and plastic non - combined board seemed to have greater anti - failing capacity. 5. Internal bond strength(IB), in contrast to MOR's tendency. showed in the order of T1

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.13 no.2
• /
• pp.2262-2275
• /
• 1971

Fourteenes rervoirs maintained by the local land improvement associations in the province of Chullabuk-Do and 20 reservoir maintained by thos in the province of Chullanam-Do, were surveyed in connection with a correction between storage capacity and sediment deposit. In addition to this survey, 3,347 of small reservoir, that lie scattered around in the above-mentioned two provinces were investigated by using existing two provinces were investigated by using existing records pertaining to storage capacity in the office of City and country, respectively. According to this investigation the following comclusions are derived. 1. A sediment deposition rate is high, being about $10.63m^3/ha$ of drainage area, and resulting in the average decreasc of storage capaity by 27.5%. This high rate of deposition coule be mainly attributed to the serve denudation of forests due to disorderly cuttings of trees. Easpecially, in small reservoir, an original average design storage depth of 197mm in irrigation water depth is decreased to about 140mm. 2. An average unit storage depth of 325.6mm as the time of initial construction is decreased to 226mm at present. This phenomena causes a greater shortage irrigation water, since it was assumed that original storage quantity was already in short. 3. Generally speaking, seepage rates through dam abutment intakepipe, etc, are high due to insufficient maintenance and management of reservoir. 4. It is recommended that sediment deposit should be dredged when a reservoir is dry in drought. 5. Farmers usually waste excessive irrigation water. 6. Water saving methods should be practiced by applying only necessary water for growing stage of rice. 7. In are as where water defficiency for irrigation is severe, a soil moisture content should be kept at about 70% by applying water once in several days. 8. Tube wells should be provided so as to exploit ground water and subsurface current below stream bed as much as possible. 9. If an intake weir was constructed, a water collection well should be built for the use in drought. 10. Water conservation should be forced by converting devastated forests contained in the drainage area of reservoir to protected forests so as to take priority of yrefor estation, gully control, the prohibition of disorderly cutting of trees, etc. 11. Collective rice nurseries should be adopted, and it should be recommended that irrigation water for rice nurseries is supplied by farmer themselves. 12. Sediment desposit in reservoir should be thoroughly dreged so as to secure a original design storage capacity. 13. The structure of overflow weir should be automatic so as to freely control flood level and not to increase dam height.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.6
• /
• pp.86-97
• /
• 2011

This study analyzed the necessity of the tentatively-named "Framework Act on Landscape Architecture" as an umbrella law in the field of landscape architecture regarding legal, industrial, and academic aspects and is intended to provide basic data to suggest the optimal legal system and legislative proceedings to control it. This study can be summarized as follows: First, a form of framework act on landscape architecture is appropriate for a compromise between ideal type and political framework. Some content is suitable for proclamatory character including present and future issue related to the landscape architecture fields. Second, legislative proceedings are more reasonable as motions coming from assembly proposals rather than government. Motions by assembly proposal recommend the following procedure: submission of a legislative bill by an assemblyperson, passing of a permanent commission, review by government, leading approval by emphasis on correspondence with the principle to carry out government affairs, proclamation. Third, a frame based on content and form can be made up of a total of 7 chapters 34 articles. The function must include the following: the suggestion of direction for government policy, the systematization of the institution and what it includes, the control of government administration, a public service system regarding public relations for landscape architecture and so on. The results of this study will form a social consensus about the necessity of a framework act regarding landscape architecture fields and contribute to informing the importance of landscape architecture as related to other industrial fields.

• Journal of Forest and Environmental Science
• /
• v.19 no.1
• /
• pp.85-98
• /
• 2003

The articles, published in the Journal of Korean Forestry from Number 1(1962) to Number 6, Volume 91(2002), were surveyed and investigated for the research trend analysis about resource-plants for special use or purpose, i. e., edible plants, medicinal plants, feed resource, landscape plants, fiber plants, industrial usuage, and bee plants. If the purpose or subject matter of the research was construction or furniture timber production, mushrooms and/or pulp and paper, such research was not included in this study. These articles were classified again depending on the content of research into 14 categories: habitat environment, ecology, physiology, propagation, silviculture (tending and culture), genetics and breeding, identification, insect and disease control, animal-related research, component analysis, vegetation survey, biotechnology, management, and review. Among the total 1.434 articles published, 396 ones (27.6%) were related with plants for special use or purpose. Vegetation survey was 60 (15.2%): physiology 56(14.1%) : genetics and breeding 56(14.1%): propagation 53(13.4%): and ecology 37(9.3%). Siviculture research field included 11 articles (2.8%), which indicates that the management of resource-plants is so far from economic income as seen in the low number of management research filed articles, i. e., only 6 reports (1.5%) Korean white pine was most popular for research and included 42 articles: Robinia pseudoacacia 23: Castanea crenata 14: and ginkgo tree 14. Research related with these species had focused mainly on propagation, physiology, genetics and breeding, ecology and pest control. Based on this survey and analysis, the followings are suggested: 1. More research is required on forest herbaceous plants. 2. Cooperative research work with other industrial and/or scientific area is recommendable for commercialization including medicine, cosmetics, and food etc. 3. Research on resource-plant conservation, which includes biology, social education and policy, should be supported for next generation. 4. Mutual correspondence and information exchange about the research results between researchers and institutes is more necessary than now.

• Korean journal of applied entomology
• /
• v.54 no.1
• /
• pp.7-15
• /
• 2015

CpBV (Cotesia plutellae bracovirus) is a polydnavirus and encodes a cystatin (CpBV-CST1) gene. Its overexpression suppresses insect immunity and alters insect developmental processes. This study aimed to construct a genetically modified (GM) tobacco to further explore the physiological function of the viral cystatin and to apply to control insect pests. To this end, the transgenic tobacco lines were screened in expression of the target gene and assessed in insecticidal activity. A recombinant vector (pBI121-CST) was prepared and used to transform a bacterium, Agrobacterium tumefasciens. The transformed bacteria were used to generate transgenic tobacco lines, which were induced to grow callus and resulted in about 92% of shoot regeneration. The regenerated plants were screened by PCR analysis to confirm the insertion of the target gene in the plant genome. In addition, the expression of the target gene was assessed in the regenerated plants by quantitative real-time PCR (qRT-PCR). The qRT-PCR analysis showed that the transgenic line plant expressed the target gene about 17 times more than the control tobacco, indicating a stable insertion and expression of the target gene in the transgenic tobacco line. The insecticidal activity was then analyzed using the screened transgenic tobacco lines against the teneral 1st instar larvae of the oriental tobacco budworm, Helicoverpa assulta. Though there was a variation in the insecticidal efficacy among transgenic lines, T9 and T12 lines exhibited more than 95% mortality at 7 days after feeding treatment. These results suggest that CpBV-CST1 is a useful genetic resource to be used to generate GM crop against insect pests.