• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.807-812
• /
• 2001

This study is peformed for checking the limitation and application of each curing/heating methods on cold-weathering mat foundation construction, considering temperature control, early strength security and temperature declination range limit, by means of concrete material properties and thermal analysis technique that were published previously. In the result of this analysis, we checked the open air temperature and mat depth that are possible to apply each curing/heating methods on cold-weathering construction and found curing/heating time of each methods that is able to prevent early aged freezing damage and thermal crack

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.711-716
• /
• 2002

The purpose of this study is to develop a strength control model for application of variety internal condition at construction field. The results of this study were shown as follows ; 1) According to results of compressive strength of concrete by using equivalent age, new curve is applicable of construction field because there is similar relation with logistic curve. 2) It is shown that the construction period is shorten by reduction of the formwork removal time, because a predicted compressive strength of using the new curve is high than proposed compressive strength of standard.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.520-521
• /
• 2011

인버터의 병렬운전은 인버터간의 특성, 선로임피던스 차이, 각 구성품들의 오차 등으로 인해 적정한 제어가 되지 않는 경우 인버터간의 순환전류가 발생하여 인버터의 무효전력 부담이 증가하여 전체 전력 시스템의 용량을 감소시키게 된다. 본 논문에서는 4병렬 인버터의 병렬제어 알고리즘으로서 전압지령치와 주파수지령치의 regulation 성능이 좋은 동기좌표계 droop 제어기법을 적용한 1.2MW급 연료전지용 EBOP를 제안한다.

• Korean Journal of Computational Design and Engineering
• /
• v.17 no.4
• /
• pp.225-233
• /
• 2012

A comprehensive research effort in order to develop and disseminate modernized Korean housing (Hanok) has recently been initiated by Korean government. This large scale research project encompasses a wide spectrum of housing development including public policy, architectural plans, modules, construction materials and methods, prefabricated assemblies, automated production, construction management, and advanced information systems. For the purpose of integrating and automating the whole processes from an industry perspective, it is of great importance to develop a standard classification system and project numbering system (PNS) for the modernized Korean housing. This paper focuses on the standard classification systems and PNS for cost and schedule control. The distinct characteristics and managerial requirements were explored and embedded into the proposed classifications for modernized Hanok.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.113-116
• /
• 2006

After laws for recycling promotion of construction wastes was established on December, 2003, successive technical and institutional measures related to construction wastes are driven. Typically quality standards for recycled aggregate were enacted and officially announced, and recently the quality assurance system for recycled aggregate is promoted to be established. In relation, this study reviewed major factors affecting certification examination necessary to carry out quality assurance system for recycled aggregate and related standards to guarantee the quality of recycled aggregate. More specifically it is suggested that working place examination related to manufacturing facility and planning, quality control manpower and system, environmental and safety control, etc, and quality inspection with classified by for road construction, for concrete, and for asphalt concrete are used as quality assurance standards.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.1408-1411
• /
• 2005

The purposes of daily cover are to control odor and volatile organic compound emissions, to control litters, to mitigate rainfall infiltration. Under usual operation of landfill, the soil layer of 15cm thick is used for daily cover, but about $20{\sim}$25% of landfill capacity is consumed by daily cover volume. Considering our limited land and difficulty in getting landfill site, developing an alternative daily cover material which usually occupies much less volume than soil will be very significant. Also, if we can use waste material for alternative daily cover, we can get additional benefit of recycling waste.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.6
• /
• pp.534-539
• /
• 2013

Recently, the number of vehicles equipped with cameras that are generally used to recognize surroundings is increasing. For robust recognition, a huge amount of tests under various environments are performed. Furthermore, the installation position or orientation of the camera is also changed depending on the vehicle. This change also accompanies many tests. Correspondingly, a large cost and a great deal of manpower are required to perform these tests. This paper proposes a method to cut these costs while conducting enough tests through the construction of a database of videos and a geometric transformation of images.

• KCID journal
• /
• v.19 no.1
• /
• pp.3-18
• /
• 2012

In recent years, as environmental problems have become great concerns among many people, th loss of beach sand has become one of the highly controversial issue. Major reasons for the beach erosion within the cases of West Coast can be classified as: 1) erosion at Unyeo, Baeksajang beaches are caused by the wave refraction according to the large-scale sand dredging, 2) erosion at Kkotji, Baeksajang, and Unyeo beaches are caused by large-scale embankment construction and the coastal road construction, and 3) erosion at Chollipo and Hakampo beaches are caused by construction of small ports. Erosion in the west coast of Korea coast beach erosion control measures, include groin, zeotube, terraced stone, jetty groin, and beach nourishment. Erosion control measures initially installed to prevent erosion showed a positive effect. However, if there is no continuous source of sand, the effect of measures is fewness.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2003.05a
• /
• pp.9-12
• /
• 2003

High flowing concrete has not spread whole in the normal concrete structure, because it requires special quality control technique. And recently owing to the lack of natural resources and reinforcement of environmental standard, the construction cost of cement is increased rapidly. Also remicon industry has gone through various economical difficulty as the manufacture cost of concrete is increased. So, the purpose of this study is to evaluate the qualities of middle fluidity concrete using the fly-ash and portland blast-furnace slag cement in order to decrease the amount of cement and resolve the problem of the quality control of high flowing concrete and the manufacture cost. The results of this study show that it reduce the amount of addition of superplasticizer and develope properties of concrete to the use the fly-ash and portland blast-furnace slag cement.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10b
• /
• pp.916-921
• /
• 1998

This study describes the result for the placement of the super flowing concrete(SFC) in under-pinning-top-slab which is located Inchon subway section 1-10 where, due to heavy reinforcements and limited working space, it was difficult to place concrete. After placing 600㎥, smooth construction and quality control were possible due to the good flow-ability, self-fillingability, and the resistance of segregation of the SFC itself. Furthermore, economical efficiency was obtained through not only the reduction of the works, labors, and site noise but also the efficient construction control. Because of the crack prevention, high strength, and a fine concrete surface, this study could be considered as a momentum to be adopted generally for applying the proposed method to the difficult subway construction area in the near future.