• Journal of the Korean Solar Energy Society
• /
• v.32 no.3
• /
• pp.33-41
• /
• 2012

As the wind farms in large scale demand enormous amount of construction cost, minimizing the economic burden is essential and also it is very important to measure the wind resources and forecast annual energy production correctly to judge the economic feasibility of the proposed site by way of installing a Met mast at or nearby the site. Wind resources were measured by installing a 80[m] high Met mast at WangdeungYeo Island to conduct the research incorporated in this paper and offshore wind farm was designed using WindPRO. Wind farm of 100[MW] was designed making use of 3 and 4.5[MW] wind generator at the place selected to compare their annual energy production and capacity factor applying the loss factor of 10[%] and 20[%] respectively to each farm. As a result, 336,599[MWh] was generated by applying 3[MW] wind generator while 358,565 [MWh] was produced by 4.5[MW] wind generator. Difference in the energy production by 3[MW] generator was 33,660 [MWh] according to the loss factor with the difference in its capacity factor by 3.8[%]. On the other hand, 23 units of 4.5 [MW] wind generators showed the difference of annual energy production by 35,857 [MWh] with 4.0[%] capacity factor difference.

• Geophysics and Geophysical Exploration
• /
• v.7 no.3
• /
• pp.191-196
• /
• 2004

Seismic waveform inversion can be solved by using the classical Gauss-Newton method, which needs to construct the huge Hessian by the directly computed Jacobian. The property of Hessian mainly depends upon a source and receiver aperture, a velocity model, an illumination Bone and a frequency content of source wavelet. In this paper, we try to invert the Marmousi seismic data by controlling the huge Hessian appearing in the Gauss-Newton method. Wemake the two kinds of he approximate Hessian. One is the banded Hessian and the other is the approximate Hessian with automatic gain function. One is that the 1st updated velocity model from the banded Hessian is nearly the same of the result from the full approximate Hessian. The other is that the stability using the automatic gain function is more improved than that without automatic gain control.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.16 no.4
• /
• pp.27-40
• /
• 2013

These day morden cities have serious climatic problems due to enviornmental load caused by excessive development of urbanization. As technological improvement to answer to various ecological disasters and climate changes are also called on the field of construction, inter-disciplinary studies linked to the estabilishment of sustainable energy generation systems and enviornmental control is needed in a consilient point of view. This study aims to analyse optimal site conditions for photovoltaic system and green roof planting through solar radiation simulation in a integrated perspective. In so doing, it seeks to proffer basic study for developing a sound use of roof area that is sustainable in environmental and resources aspects. A computer simulation showed that, in the case of total seasonal solar radiation, summer season resulted 312.5kWh in 35% of total annual solar radiation. This season indicated the lowest radiation rate of the year for direct sunlight in 45.8% of total seasonal solar radiation. Due to such solar radiation simulation, at the largest optimal planting area, Glechoma hederacea var. longituba secured $719.16m^2$ of gross roof area.

• Science of Emotion and Sensibility
• /
• v.6 no.3
• /
• pp.73-87
• /
• 2003

This research extends a general theory of human cognition to an applied domain of piloting skills. We examined how fast and accurately pilots achieve and maintain situation awareness in flight by measuring their consistency judgment between a written statement describing a flight situation and a cockpit display showing a current state of an aircraft. The goal of this research is to determine whether situation awareness is influenced by expertise level as a Auction of two different kinds of flight situation variables. It was revealed that flight situation variables representing relations between flight elements had an effect on situation awareness. Working memory was found to play a critical role in integrating a variety of flight information form multiple sources. It was also revealed that flight situation variables representing the contents of flight elements had influence on situation awareness in flight. These results were explained in a theoretical framework of a construction-integration model to reveal the cognitive processes underlying situation awareness in flight.

• Journal of Korean Society on Water Environment
• /
• v.32 no.6
• /
• pp.562-569
• /
• 2016

Recently, Low Impact Development (LID) is being used in Korea to control urban runoff and nonpoint source pollution. In this study, we evaluated the reduction of surface runoff from a study area, as the effect of connecting three bioretention as LID-BMP. Surface runoff and storage volume of bioretention is estimated by the Curve Number (CN) method. In this study, the storage volume of bioretention is divided by the volume of surface runoff and precipitation which directly enters the bioretention. The ratio of captured surface runoff volume to storage volume is highly influenced by the ratio of drainage area to surface area of bioretention. The high bioretention surface area-to-drainage area ratio captures more surface runoff. The ratio of 1.2 captures 51~54% of the total surface runoff, ranging from 5-30cm of bioretention depth; a ratio of 6.2 captures 81~85%. Three connected bioretentions could therefore captures much more runoff volume, ranging from $35.8{\sim}167.3m^3$, as compared to three disconnected bioretentions at their maximum amount of precipitation with non-effluent from the connecting three bioretentions. Hence, connecting LID-BMPs could improve the removal efficiencies of surface runoff volume and nonpoint source pollution.

• Journal of Korean Society of Water and Wastewater
• /
• v.14 no.1
• /
• pp.62-75
• /
• 2000

Most of biological treatment to remove contaminants in municipal wastewater have been conducted by activated sludge process. But, the process have several probIems such as enormous site needed for construction of treatment facilities, unstable treatment due to limited ability to control load fluctuation, frequent sludge bulking and appearance of lots of surplus sludge. In this study, the experiments were performed through submerging biofilm of PEPP media in existing aeration tank with raw water from municipal wastewater treatment plant and then submerging PVDC and PEPP media, different from shape and chemical peculiarity in anoxic reactor. Throughout the experience, nutrient removal efficiency according to HRT, nitrogen phosphorous removal efficiency, behavior of nitrogen and dewatering efficiency have been compared and analysed with those of activated sludge process. As the results, BOD removal efficiency according to BOD volumetric load and F/M ratio was not found any differency in two processes, but was decreased below 90% as going along the condition of high load in activated sludge process. Kinetic coefficient was $K_{max}=1.162day^{-1}$, $K_s=53.77mg/L$, $Y=0.166mgVSS/mgBOD_{rem}$. and $K_d=0.019day^{-1}$. It was found that the removal efficiency, even though in aerobic condition, in biofilm process equipped anoxic reactor was higher than the one in activated sludge process within the range of 70~80%, and became better as HRT increased. Phosphorous removal efficiency was not found any differency in two processes. In biofilm process, treament efficiency even in conditions of high load was not decreased, because the biomass concentration could be maintained in high condition compared with activated sludge process. As HRT increased, suspended and attached biomass was increased and the other hand, F/M ratio was decreased as biomass' increasing. Biomass thickness was increased. from $10.43{\mu}m$ to $10.55{\mu}m$ as HRT increased and density of biomass within $40.79{\sim}41.16mg/cm^2$. The results also present that the dewatering efficiency of sludge generated in biofilm process was higher than in activated sludge process, and became better as HRT increased.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2002.11a
• /
• pp.280-287
• /
• 2002

Most Technological laws of Korea are almost identical to those of Japan. Electricity was not introduced to Korea until lighting ceremony in Kyong-Bok palace observed in 1887. Since Korea was annexed to Japan in 1910, Korea have applied Japanese law and regulations made by Chosun government-general. And public works were under Japan control. Korea accepted adopted the power plants of America, codes of NESC, ASME / ANSI, MEMA while Japan accepted or adopted only IEC. Our generation distribution system takes American style while our consumer side takes Japanese style. As global trade system was transferred GATT into WTO, the technological standards, certification, construction and testing are in harmony internationally. The WTO / TBT agreement came in effect after 12th, April, 1979. The sections in the agreement require the members to exchange their own standards and codes for the harmonized ones by degree. The Korean distribution system has a strong resemblance to American system so that the internal engineers are confused in application of the relevant standards. IEC60364 and NEC are technologically similar but practically unconvertible because both have their different originality, that is to say Europe and USA. This paper deals with the fundamental elements of electrical safety system on review of IEC 60364 and NEC. This paper considers how engineers should apply IEC60364 and NFPA 70(NEC) based on all-the-way review of them.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.24 no.1
• /
• pp.45-62
• /
• 2013

Since research articles aren't be fixed in particular system, author name of articles have been handled not by authority control but by unique identifier. While unique identifier has a tendency that moves toward open-transparent global link system, lately ORCID has been initiated. ORCID is not only link diverse existing ID system as a partner, for example, publisher's ID systems, university's research assessment systems, manuscript tracking systems but also let researchers self-claim by themselves to identify their own articles. Though, since ORCID run based on overseas' publications, it is not appropriate to adapt ORCID shortly to Korean researcher's identification. So this study suggests the direction of domestic researcher's identification system by applying ORCID.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.3-23
• /
• 1997

The growth in fast-track construction and repair has prompted major efforts to develop high-early-strength concrete mix compositions. Such mixtures rely on the use of relatively high cement contents and accelerator dosages to increase the rate of strength development. The measures, however, seem to compromise the long-term performance of concrete in applications such as full-depth patches as evidenced by occasional premature deterioration of such patches. The hypothesis successfully validated in this research was that traditional methods of increasing the early-age strength of concrete, involving the use of high cement and accelerator contents, increase the moisture and thermal movements of concrete. Restraint of such movements in actual field conditions, by external or internal restraining factors, generates tensile stresses which introduced microcracks and thus increase the permeability of concrete. This increase in permeability accelerates various processes of concrete deterioration, including freeze-thaw attack. Fiver reinforcement of concrete is an effective approach to the control of microcrack and crack development under tensile stresses. Fibers, however, have not been known of accelerating the process of strength gain in concrete. The recently developed specialty cellulose fibers, however, were found in this research to be highly effective in increasing the early-age strength of concrete. This provides a unique opportunity to increase the rate of strength gain in concrete without increasing moisture an thermal movements, which actually controlling the processes of microcracking and racking in concrete. Laboratory test results confirmed the desirable resistance of specialty cellulose fiber reinforced High-early-strength concrete to restrained shrinkage microcracking an cracking, and to different processes of deterioration under weathering effects.

• International Journal of Advanced Culture Technology
• /
• v.6 no.3
• /
• pp.187-192
• /
• 2018

Permeate alteration technique is compounded the steeple sway-tuner status of the gleam-differential realization level (GDRL) on the permeate realization morph. The realization level condition by the permeate realization morph system is associated with the sway-tuner system. As to search a dot of the dot situation, we are gained of the permeate value with character-dot by the output signal. The concept of realization level is composed the reference of gleam-differential level for alteration signal by the permeate tuner morph. Moreover displaying a steeple alteration of the GDRL of the average in terms of the sway-tuner morph, and permeate dot tuner that was the a permeate value of the far alteration of the $Per-rm-FA-{\alpha}_{AVG}$ with $14.63{\pm}1.23units$, that was the a permeate value of the convenient alteration of the $Per-rm-CO-{\alpha}_{AVG}$ with $8.28{\pm}0.97units$, that was the a permeate value of the flank alteration of the $Per-rm-FL-{\alpha}_{AVG}$ with $3.28{\pm}0.58units$, that was the a permeate value of the vicinage alteration of the $Per-rm-VI-{\alpha}_{AVG}$ with $0.51{\pm}0.10units$. The sway tuner will be to evaluate at the steeple ability of the sway-tuner morph with character-dot by the permeate realization level on the GDRL that is displayed the gleam-differential morph by the realization level system. Sway realization system will be possible to control of a morph by the special signal and to use a permeate data of sway tuner level.