• Korean Institute of Interior Design Journal
• /
• no.38
• /
• pp.134-142
• /
• 2003

The residential apartments have become a choice of a popular housing space since the first establishment of Mapo apartment in 1962. Therefore, the residential market experienced a bloom where residential apartments were sold as they were built simultaneously. However, this phenomenon was turned around and unsold lots appeared after the period of IMF and as the construction companies put out more various apartments by differing the characters and the strategies in building apartments. As a result, the leadership of residential market moved from the suppliers to consumers, in consequence, the wants of the consumers became more demanding. The consumer can freely control the number of rooms with a variable wall system or a bigger sized apartment with two entrances to the living room as well as having a bathroom with a master bedroom in a small-sized apartment. Many conceptual trials like this were taken to improve the residential environment and to give a change to the unit plan of the public housing. From these changes, one can observe a general trend that is taking place in current residential housing. Consequently, this study is on the type classification of unit plans in public housing built after 1999 and dwelled from 2001. The objectives of this study are to confirm the characteristics of the unit plans applied in recent public housing and provide basic materials that can be incorporated to residential space plan from now and hereafter.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.11
• /
• pp.1907-1912
• /
• 2016

In fact, in order to obtain good performances and low torque ripple, a high-resolution sensor is needed, which is costly and usually needs a special construction for the machine. So researchers are becoming aware of their cost and are exploring the possibility of cost reduction. Information of rotor position is necessary to drive Linear Switched Reluctance Motor(LSRM). Therefore, linear optical encoder is used to detect a mover position. Normally, since the price of encoder, which is used for linear motor is relatively higher than the one used for rotory motor and the cost of additional equipment increases with the length of motor. This is not always appropriate, considering economical efficiency in case of using the linear optical encoder. As a results, LSRM has a great part for the total cost. Therefore, in this paper, we propose LSRM position detecting modeling with reflective type photo-sensor. Additionally, we have investigated the possibility of the reduced position sensor for LSRM drives with advanced control technique. To certify the overall characteristics of the proposed method, a simulation using PSIM software has been carried out and the informative results are displayed.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.4
• /
• pp.56-61
• /
• 2000

Cognition and control of grinding trouble occurring during the grinding process are classified into a quantitative knowledge which depends on experimental data and qualitative knowledge which relies on skilful engineers. Grinding operations include a large number of functional parameters, since there are several ways of coping with grinding trouble. One is the qualitative method which depends on empirical knowledge utilizing the skilful experts from the workship, the other is the quantitative method which utilizes the experimental data obtained by a sensor. But, they are all difficult to accomplish from the grinding trouble-shooting system. The reason is that grinding troubles are now easily controlled in the quantitative method, and therefore, trouble-shooting has mainly relied on the knowledge of skilful engineers. Thus, there is an important issue of how a grinding trouble-shooting system can be designed and what knowledge is utilized among the large amount of grinding trouble information. In this paper, basic strategy to develop the grinding database of rule-based model, which is strongly depended upon experience and intuition , is described.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.6
• /
• pp.1025-1031
• /
• 2013

A library of parametric CAD models should be provided for the reuse of design data in configuration design. Mechanical products have many options and parameters, which in turn, require a large number of CAD models for configuration designs. Existing methods for library construction are limited in their ability to decrease the number of CAD models and ensure independency between the configuration design system and the library. To solve these problems, we propose a method that controls a CAD library based on part-shape information model, and also present its technical details. To verify the proposed method, a CAD library for bicycles was constructed and design modification experiments using a prototype part-shape controller were performed. From the experiments, we found that the proposed method can effectively decrease the required number of CAD models by reusing models for configuration designs.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.1
• /
• pp.53-60
• /
• 2005

The wire rope of container crane is a important component to container transfer system and is used in a myriad of various applications such as elevator, mine hoist, construction machinery, and so on. If it happen wire rope failures in operating, it may lead to the safety accident and economic loss, which is productivity decline, competitive decline of container terminal, etc. To solve this problem, we developed the active and portable wire rope fault detecting system. The developed system consists of three parts that are the fault detecting, signal processing, and remote monitoring part. All detected signal has external noise or disturbance according to circumstances. Therefore we applied to discrete wavelet transform to extract a signal from noisy data that was used filter. As experimental result, we can reduce the expense for container terminal because of extension of exchange period of wire rope for container crane and this system is possible to apply in several fields to use wire rope.

• Journal of the Korean Society of School Health
• /
• v.26 no.2
• /
• pp.72-80
• /
• 2013

Purpose: This study was done to construct and test a structural model to explain factors associated with middle school students' suicidal ideation focusing on mediating effects of anger and depression Methods: Data was collected by questionnaires from 349 students selected randomly in 11 middle schools in D city. The data were analyzed using PASW 18.0(win) and AMOS 18.0(win) program. Results: Model fit indices for the hypothetical model were in good agreement with the recommended levels (CFI=.957, GFI=.945). Based on the constructed model, depression was significantly affected by anger directly, and suicidal ideation was directly influenced by depression, indirectly by anger. It was confirmed that depression turned out to be a important mediating variable on suicidal ideation and anger in middle school students. Conclusion: The results suggest that intervention strategies for dealing with anger or depression is important to reduce the suicidal ideation in middle school students. In addition, specific nursing intervention plans, including fostering of humanistic and achievement-focused educational environment, peer support programs, and individual counselling, need to be developed and implemented to control a feeling of anger and depression.

• Journal of Sericultural and Entomological Science
• /
• v.39 no.1
• /
• pp.36-43
• /
• 1997

In order to express the FLP recombinase in B. mori cultured cell line, BmN-4, transient expression system using a heat shock protein gene (hsp70) promoter of Dorosophilla melnogaster was constructed. This vector was designated as pHsSV. Activity strength of the hsp70 promoter was compared with that of immediate early gene (IE-1) and polyhedrin gene of BmNPV employing the E. coli $\beta$-galactosidase gene as a reporter gene. The result showed that the pHs $\beta$-gal plasmid vector expressed the $\beta$-galactosidase at 2nd and 3rd day after the transfer of plasmid DNA into BmN-4 cells, which was similar to that of pIE1 $\beta$-gal vector, but different from that of a recombinant virus, vBm $\beta$-gal. For the construction of FLP recombinase transient expression vector, the FLP recombinase gene was cloned by polymerase chain reaction technique. To express the FLP recombinase, this gene was inserted into pHsSV plasmid vector, under the control of the hsp70 promotor, and tranfected in BmN-4 cells. The expressed FLP recombinase was estimated at 44kDa on a 12.5% SDS-PAGE.

• Proceedings of the KOR-KST Conference
• /
• 1995.05b
• /
• pp.69-76
• /
• 1995

Difficulties in riding , driving and parking are a common issue which inevitably appears in city urbanization and city modernization development all over the world. However, those cities differ in controlling the traffic. According to the specific practice in Shanghai, this article presents the various factors which affect the traffic capacity and operation quality . This article also outlines transportation system management technique of overall coordination and comprehensive control in the following seven aspects : controlling traffic motivation : improving traffic distribution : reasonably and scientifically selecting travel mode, travel route and travel time : reinforcing traffic management and road construction. The article finally suggests that the above mentioned points are cost-effective ways of the handling traffic plight for metropolitan transport.

• Journal of Sensor Science and Technology
• /
• v.17 no.3
• /
• pp.229-235
• /
• 2008

In order to monitor the anticancer drug in stable conditions, the Web based anticancer drug management system and alarm services were constructed and assessed in this study. Anticancer drug should be exact to the correct patient in the right environment. To overcome the restriction of existing equipment that only monitors fragmentarily, temperature and humidity were continuously monitored to maintain stable environments using sensor networks and RFID for the monitoring and management of anticancer drug. Construction drug identification and the effect of normal air outside the anticancer dispensary with obstacles were evaluated in working hour. Pre-installed control system in the dispensary could be alternated with auto sensing and alarming. We expected that the efficiency of anticancer drug management and the reliability of drug medication by handwork would be increase accordingly.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.3
• /
• pp.621-627
• /
• 2017

In this study, GPS (Global Positioning System) is applied to rollers for quality control problems caused by empirical judgment of compaction construction. In addition, database and 3D modeling of location information can eliminate unnecessary compaction or excessive compaction, thereby improving quality and shortening the time. This paper presents a methodology of ICMV (Intelligent Compaction Measurement Values) analysis by designing a intelligent compaction method using an accelerometer. Detailed method of ICMV analysis includes CMV (Compaction Meter Value) analysis which can quickly and conveniently evaluate the compaction of the compacted ground.