• Journal of Wetlands Research
• /
• v.12 no.3
• /
• pp.1-13
• /
• 2010

Most of investigations about the effects of dam construction on the surrounding environments have focused mainly on the change of climate conditions and crop production. In order to research the effect of dam construction on the surrounding vegetation, we chose the Soyanggang dam whose storage capacity is the largest in Korea, and was built 33 years ago. We surveyed and analyzed the surrounding vegetation by using quadrat method and measured the soil moisture content among floodplain (FP), 5m above the flood plain (AFP) and control group (CG) which is 3km far from the lake through ridge. The largest value of mean importance percentage of the canopy~understory layer at FP was Salix koreensis (87.9%) and those of AFP and CG was Quercus mongolica (38.9% and 40.4% respectively) and the largest important percentage of the herb layer at FP was Artemisia capillaris (34.2%) and those of AFP and CG was Oplismenus undulatifolius var. undulatifolius (9.4% and 24.6% respectively). The Shannon-Wiener diversity index of shrub~canopy layer at FP (0.26) was lower than AFP (2.34) and CG (2.23) and there was not any significant difference in the herb layer among three groups. The S${\o}$rensen similarity index between FP and AFP, FP and CG was 0, and that of AFP and CG was relatively high. The highest density of tree and subtree with the DBH level of FP was S. koreensis of 5~10cm (240/ha), and that of AFP and CG was Quercus spp. of 15~20cm (400/ha and 466/ha respectively). And the highest density of seedlings of FP was Pinus densiflora (7,040/ha), and that of AFP and CG was Quercus spp. (720/ha and 400/ha respectively). The soil water content of FP (6.28%) was relatively lower than AFP and CG (11.13% and 10.14% respectively; p<.01). These results indicated that construction of Soyanggang dam changed the vegetation of the floodplain, without showing a change in its upland areas.

• Journal of the Korea Concrete Institute
• /
• v.20 no.1
• /
• pp.67-75
• /
• 2008

An engineered cementitious composite produced with slag particles (Slag-ECC) had been developed based on micromechanical principle. Base grain ingredients were properly selected, and then the mixture proportion was optimized to be capable of achieving robust tensile ductility in the hardened state. The rheological design is performed in the present study by optimizing the amount of admixtures suitable for self-consolidating casting and shotcreting process in the fresh state. A special focus is placed on the rheological control which is directly applicable to the construction in field, using prepackaged product with all pulverized ingredients. To control the rheological properties of the composite, which possesses different fluid properties to facilitate two types of processing (i.e., self-consolidating and shotcreting processing), the viscosity change of the cement paste suspensions over time was initially investigated, and then the proper dosage of the admixtures in the cement paste was selected. The two types of mixture proportion were then optimized by self-consolidating & shotcreting tests. A series of self-consolidating and shotcreting tests demonstrated excellent self-consolidation property and sprayability of the Slag-ECC. The rheological properties altered through this approach were revealed to be effective in obtaining Slag-ECC hardened properties, represented by pseudo strain-hardening behavior in uniaxial tension, allowing the readily achievement of the desired function of the fresh Slag-ECC. These ductile composites with self-consolidating and shotcreting processing can be broadly utilized for a variety of applications, e.g., in strengthening seismic resistant structures with congested reinforcements, or in repairing deteriorated infrastructures by shotcreting process.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.1
• /
• pp.123-132
• /
• 2014

This study aims to develop the diagnostic evaluation method of the riverine ecobelt for construction, conservation, and maintenance of the riverine ecobelt. The value indices in the proposed evaluation method are composed of total 5 fields and 19 elements. The 5 fields are flood control, environmental function, growth of plants, ecobelt function, and restoration potential. Flood control field is composed of total 3 elements such as length, width, and density of green area. Environmental function field is composed of 4 elements such as park use, landscape boundary and edge, microclimate control, non-point pollution control. Growth of plants field is composed of 6 elements such as species composition, forest height, stratum structure, vine plants, plant vitality, and succession of plants. Ecobelt function field is composed of 4 elements such as longitudinal connectivity, lateral connectivity, in-stream forest or habitat, roads on bank top. Restoration potential field is composed of 2 elements such as landform and land use of the immediate vicinity. The score system ranging 1~4 was adopted. The weighting parameters of elements were unified with each other. The final grade system ranging 1~5(1: very good~5: very bad) was adopted, and the final grade was evaluated by the mean values of each field. According to the test application of the diagnostic evaluation method of the riverine ecobelt, the final grades showed effectively the real condition of each site.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1996.05a
• /
• pp.91-115
• /
• 1996

In the recent years, protected horticultural facilities have been modernized and glasshouses are also propagating in Korea, even most vegetables production are conducted in the traditional plastic houses covered with, for example, PVC film for just temperature keeping. It would limit the productivity and competitivity of the vegetable production industry without automatization and high quality year round production. A plant factory, aimed to produce vegetables in the limited areas, was initiated in Christensen farm, Denmark in 1957, and widely propagated in some developed countries. As it has the automatized system which enables to keep optimized environment conditions, it will be the best facility for high quality products as well as year round planned production. However, we have not even started the plant factory production. Since the plant factory is requiring lots of resources, besides plant cultivation technologies, such as environment control, automatic engineering and robotics, our approach to the development of plant factories should be minded on Practical Plant Factories considering our current farming practices and least capital needs rather than blindly employing the advanced technologies from developed countries. Thus, Korean plant factory development can be initiated with year round leaf vegetables production in NFT or DFT cultivation system instead of the moval bed system, in which aerial environment factors such as light, temperature, humidity and CO$_2$ concentration and root environment ones such as solution concentration, temperature, pH and water soluble oxygen shall be automatically controlled. And the seeding, seedling and transplanting operations shall be accomplished in the house entrance, and the harvesting and grading opreations shall be conducted in the house exit. For practical plant factories, environment control technologies including artificial light source, illumination and air conditioning, automatic management for nutrient solution and automatic production line of moval bed system, transplanting and harvest should be developed along with researches on the cost reduction of factory building construction.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.804-809
• /
• 2015

Since Korea is home to Reticulitermes speratus, a kind of subterranean termites that prefer dark and humid conditions, there have been increasing damages to wooden structures by termites. One noticeable attribute of Korean subterranean termites is that they prefer than Pinus densiflora, the major construction material for Korean traditional houses. And because wide varieties of termites are distributed all over the world, it is not so easy to choose appropriate control methods depending on specific areas. This necessitates careful applications of the following control methods depending on the kinds of termites: fumigation treatment, soil termiticide, preservatives and insect treatment, termite colony elimination system, chemical treatment, and other physical and biological treatment methods. The purpose of this study is to investigate the control effects of environmentally-friendly Alkaline copper quaternary (ACQ), Copper Azole (CuAZ) and Micronized copper quarter (MCQ) on the termites contributing to the damage of wooden structures. It was found in this study that wood with preservative treatment produced a significantly higher termicidal efficacy than untreated wood.

• Journal of Korean Society of Forest Science
• /
• v.101 no.3
• /
• pp.412-425
• /
• 2012

Concrete Soil Erosion Control Dam, which blocks flow of debris flow in torrential stream, are reported to lose expected functions due to structural failure and collapses, caused by poor construction, material deterioration and external impacts. In this paper, an integrity assessment technique for debris barriers was proposed, which allows preliminary detection of problems inherent in debris barriers. The proposed integrity assessment technique is a non-destructive method based on SASW method, one of surface-wave tests. In this paper, a practical procedure and analysis guidelines in applying the SASW technique to debris barrier was proposed and its validity was verified using five decrepit debris barriers older than 20-year old. As a result, the SASW method was validated for the reliable grade evaluation method for concrete soil erosion control dam, and the resulting grades turned out to agree with the results determined by Sabang Associations.

• Journal of Wetlands Research
• /
• v.13 no.1
• /
• pp.139-148
• /
• 2011

Web structure of spiders is a foraging strategy as well as an investment to get prey. In order to make a good foraging decision spiders should change its foraging strategy in the basis of sensory information provided by potential prey species. We conducted experiments to demonstrate whether a wasp spider, Argiope bruennichi modifies its web-building behavior after experiencing sensory information emitted by a cricket species, Teleogryllus emma. To know how the web structures would be modified, we quantified web characteristics after providing sensory information of the cricket and compared to the control group. Web construction decreased in the course of the experiment in both, control group(without stimulus) and experimental group(with stimuli). The results did not show remarkable differences between two groups. However, on the first day after providing sensory information of the cricket, the web-building behavior of A. bruennichi decreased only in 3.7% of the experimental group individuals against 11.8% of the control group individuals. The number of the stabilimentum constructions decreased overall in both groups. On the first day the decreasing proportion was doubled in the control group(14.7%), comparing to the experimental group(7.4%). The individuals did not lower its web height and did not extend its web area according to sensory information of the prey.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.4
• /
• pp.100-107
• /
• 2018

The objective of this study is to assess the strengthening effects of fiber reinforced polymer(FRP) sheets such as Carbon fiber, Glass fiber, and PET(polyethylene terephthalate) on reinforced concrete flexural members. Variables of theoretical analysis are types of strengthening materials, material properties and amount of strengthening materials. A virtual flexural member without FRP sheets was created as a control specimen to understand the structural behavior of the non-strengthened specimen in terms of elastic and ultimate cross section. In total, 11 specimens including one non-strengthened and ten strengthened specimens were investigated. Various variables such as types of strengthening, strengthening properties, and amount of strengthening were studied to compare the behavior of the control specimen with those of strengthened specimens with regard to moment-curvature relationship. Results of theoretical analysis showed that the moment capacity of strengthened specimens was superior to that of the control specimen. However, the control specimen indicated the best ductility among all the specimens. As the amount of strengthening increased, flexural performance was improved. Furthermore, the results indicated that the ductile effect of members was affected by the ultimate strain of FRP sheets. The strengthening effect on the damaged member was similar to that on the non-damaged one since there was less than 10% difference in terms of flexural strength and ductility. Therefore, even if a damaged member is treated as non-damaged for analysis there is probably no noticeable difference.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.537-548
• /
• 2013

In this study, the hydraulic channel routing model was constructed to analysis the effect of flood control with the operation of Chungju Dam for 2006 flood. Study area was divided with up- and downstream of Chungju Dam in the upper Han River of Paldang Dam. The model was calibrated and verified for the flood event of 1995-2008. The effects of flood control of Chungju Dam were compared with the simulation results without the dam, and the rising effects of stage in the main observation stations were analyzed by the variation of released dam discharge. Consequently, the operation of Chungju Dam for 2006 flood was performed properly, but the effects of flood control of Chungju Dam were so focused in downstream of the dam that institutional complement was demanded to reduce the flood damage in the upper region of the dam. The limit of decision rule of downstream stage in the backwater region of dam was analyzed to solve the problem, and the decision rule of downstream stage was proposed to consider the discontinuity between the backwater region of dam and the design flood of upper stream. The proposed rule will be used to design the reduction of flood damage in upper stream of dam and to apply the analysis of region for flood damage.

• Journal of Oral Medicine and Pain
• /
• v.30 no.1
• /
• pp.35-44
• /
• 2005

Purpose: The aim of this preliminary study was to evaluate the effect of Problem-Based Learning (PBL) curriculum on development of comprehension of basic medical knowledge and quality of semi-structured problem solving including scientific reasoning skill. This scientific reasoning contained five components including: size of simple, design of research cause-effect, construction of risk factor, analysis statistic of data, interpretation of result. Materials and Methods: Seoul National University Dental students (100) participated in this experience during two weeks, 2004. Forty eight multiple-choice questions (MCQ) concerned "Infection Control and Prevention" were asked before and after two sections of Lecture-Based Learning (LBL) and PBL (pretest-posttest control group design). A semi-structured problem in epidemiological research was asked to these students after two sections (posttest-only control group design). Data (mean and SD) were analysed using the t Test for two independent samples (p<.05), comparing PBL versus LBL. Results: Our analyse of scores show no difference between LBL and PBL in the development of comprehension of "Infection Control and Prevention". The quality problem solving (epidemiological research) was significantly different between the two groups (p=.029); specially, two components' scores of reflection on scientific reasoning cause-effect (p=.000) and interpretation of result (p=.001) were significantly better for PBL than for LBL. Conclusion: Theses results indicate that comparing LBL and PBL, PBL curriculum have not been disadvantaged in comprehension of basic knowledge, and have contributed to develop the scientific reasoning in problem solving.