• Journal of the Society of Disaster Information
• /
• v.11 no.1
• /
• pp.135-147
• /
• 2015

Recent underground common utility tunnels are underground facilities for jointly accommodating more than 2 kinds of air-conditioning and heating facilities, vacuum dust collector, information processing cables as well as electricity, telecommunications, waterworks, city gas, sewerage system required when citizens live their daily lives and facilities responsible for the central function of the country but it is difficult to cope with fire accidents quickly and hard to enter into common utility tunnels to extinguish a fire due to toxic gases and smoke generated when various cables are burnt. Thus, in the event of a fire, not only the nerve center of the country is paralyzed such as significant property damage and loss of communication etc. but citizen inconveniences are caused. Therefore, noticing that most fires break out by a short circuit due to electrical works and degradation contact due to combustible cables as the main causes of fires in domestic and foreign common utility tunnels fire cases that have occurred so far, the purpose of this paper is to scientifically analyze the behavior of a fire by producing the model of actual common utility tunnels and reproducing the fire. A fire experiment was conducted in a state that line type fixed temperature detector, fire door, connection deluge set and ventilation equipment are installed in underground common utility tunnels and transmission power distribution cables are coated with fire proof paints in a certain section and heating pipes are fire proof covered. As a result, in the case of Type II, the maximum temperature was measured as $932^{\circ}C$ and line type fixed temperature detector displayed the fire location exactly in the receiver at a constant temperature. And transmission power distribution cables painted with fire proof paints in a certain section, the case of Type III, were found not to be fire resistant and fire proof covered heating pipes to be fire resistant for about 30 minutes. Also, fire simulation was carried out by entering fire load during a real fire test and as a result, the maximum temperature is $943^{\circ}C$, almost identical with $932^{\circ}C$ during a real fire test. Therefore, it is considered that fire behaviour can be predicted by conducting fire simulation only with common utility tunnels fire load and result values of heat release rate, height of the smoke layer, concentration of O2, CO, CO2 etc. obtained by simulation are determined to be applied as the values during a real fire experiment. In the future, it is expected that more reliable information on domestic underground common utility tunnels fire accidents can be provided and it will contribute to construction and maintenance repair effectively and systematically by analyzing and accumulating experimental data on domestic underground common utility tunnels fire accidents built in this study and fire cases continuously every year and complementing laws and regulations and administration manuals etc.

• Archives of design research
• /
• v.19 no.4 s.66
• /
• pp.61-70
• /
• 2006

The functions and roles in the various fields of modern society are changing into the unified and multiplex structure, which is simultaneous and virtual communication environments beyond physical space and time, by the digital IT technology. The urban traffic system is also being intellectualized in order to solve urban traffic problems and convenient services by using digital IT technology. The bus, which is the one of the most common public transportation, are suffering in the decrease of bus service quality and the bus passengers rate because of the development of other public transportation systems such as the subway and electric railway and by rapidly increasing private cars. By recognizing these problems, many domestic and overseas cities are promoting to introduce the Bus Information System (BIS) to improve service quality of buses through the intelligent traffic system. According to the construction of this new information system called the Bus Information System (BIS), the new bus stop configuration system and design plans are being required to solve the existing bus stop information system. Therefore, this research was conducted to suggest an effective BIS configuration system plan and synthetic design goals based on the investigation the problems of the information system and the BIS configuration system for Busan city. Also, this research are conducted the below actions as follows: First, the literature survey was conducted, such as theoretical documents on the bus stop and the Bus Information System(BIS), Also, the design trend of the BIS was examined through domestic and overseas BIS cases studies. Scondly, the problems related to the information system in Busan city bus stops were investigated to investigate the present state and problems of the Bus Information System (BIS). Finally, as a result of this research, the effective BIS configuration system plan and design approach methods of bus stops were proposed for by Busan city based on the above investigation results.

• Cartoon and Animation Studies
• /
• s.35
• /
• pp.29-65
• /
• 2014

Visual culture art education (VCAE) seems to be the new paradigm for art education after postmodernism. Getting beyond the traditional art education, VCAE has expanded its scope of interest to include the visual environment that surrounds our life, thus pushing the boundary of art education beyond the traditional fine arts to cover pop culture and visual art. VCAE shares the issues as well as a lot of elements of culture and art education and in fact serves as a major theoretic background for culture and art education, in that it pays attention to the sociocultural context of images and emphasizes visual literacy and constructionist learning. In this paper, I have reviewed the theoretical background and related issues of VCAE with a view to presenting a direction for animation education, which is gaining in importance coming into the Age of Digital Media. VCAE was born in the progressive cultural atmosphere from the 1970s and thereafter, and its gist consists in figuring out visual artifacts and their action in order to improve individual and social life. Yet, VCAE continues with its development according to the changing aspects of visual culture, and currently, it is expanding its scope of interest to cover the esthetic, experiential education in visual culture and construction of meaning through digital story-telling. In the visual environment of the Digital Age, animation is establishing itself as the center of the visual culture, being a form that goes beyond an art genre or technology to realize images throughout the visual culture. Also, VCAE, which has so far emphasized visual communication and critical reading of culture, would need to reflect the new aspects of the visual culture in digital animation across the entire gamut from experiencing to understanding and appreciating art education. In this paper, I emphasize on Cross-Curricula, social reconstruction, the expansion of animation education, interests in animation as a digital media, and animation literacy. A study of animation education from the perspective of VCAE will not only provide a theoretical basis for establishing animation education, but also enrich the content of VCAE, traditionally focused on critical text reading, and promote its contemporary and futuristic orientation.

• Journal of the Korean association of regional geographers
• /
• v.2 no.2
• /
• pp.133-157
• /
• 1996

Recently, international convention competition has greatly expanded with the globalization and expand of world economy. As the conventions market has grown, so have the number of places and facilities of convention competing for business, and numerous trade show and the related meetings held the several cities toward world city such as the United States, Europeans Countries, Japan, and Singapore. Convention, in general, are defined as an assembly, often periodical, of members or delegates, as a political, social, professional or religious group. Convention center means the place that hold several social, political, economic conferences and meetings, trade show, exhibitions, and events. Convention center are consisted the several facilities such as meeting room, exhibition hall, event hall. Historically, meetings, conventions, and trade show have been serviced primarily by hotel and convention centers. With the expand of world trade and flow in recent, the conventions, expositions, and meetings industry (CEMI), however, is one of the most rapidly growing industries in hospitality and tourism, and CEMI provides import effect on regional economy and regional development including regional tourism industry. This study focuses on the establishment strategies and location analysis of convention center as a agent for regional development in a case of Yosu Peninsular Area (YPA). YPA is one of the major industrial area of our country, and displays the rapid regional urbanization and social change with the construction such as Kwangyang container port facilities, Yulchon industrial complex, and the extension planning of industrial estate related to Kwangyang Iron and Steel Company, and population size of this area will be reached about two million peoples in 2011. This area, particularly, will be functioned as a major container & export port of our country after the completion of Kwangyang container port facilities in 1988. If the planned industrial estate is constructed, the convention center for conference exhibition, information exchange, and resort facilities for exhibition, international communication will be needed. In addition, resort and leisure facilities for conventions' participants need. This area, therefore, has to make the establishment of convention center for regional development in future. Thus, the major strategies and idea for establishment of convention center as follows: first, this area has requirements for resort convention center, because this area will be functioned as a major export port and industrial district in 21 century; second, in the location analysis of convention center site, Sinwol & Woongchon district, Soho district, and Yongju & Hodu district are selected as developing possible sites; third, the convention center of this area has to consist of two functions such as convention facilities and marine resort facilities; fourth, in order to establish convention center, the selection of main group, financial raising strategies, and the organization of propulsion committee for establishment of convention center are required.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.3
• /
• pp.15-22
• /
• 2010

Today's rapid shifts toward a new paradigm are combining city spaces with reality and technology, which is known as a ubiquitous environment. An ubiquitous environment means that 'whenever' and 'wherever' become connected. It is a great possibility that this will change our future lifestyle. Korea has the biggest advantage in the implementation of this new environment, such as having an excellent network infrastructure. Using these attributes of a ubiquitous environment, changes are being made toward ubiquitous cities within developing fields of construction, landscaping, streets, art, and the environment. This research is based on background of research that activated media pole in public city space has been done research about reality of digital skill, fusion, and sense of ubitizen, and Kang-Nam U-street applied by ubiquitous technique. While reflecting an environment that can be utilized in a modern digital society, the application of ubiquitous technology to media pole can be a space for the two-way communication of the current paradigm. It would also be meaningful to create a new cultural space through media pole. Through evaluation, citizens of the ubiquitous age are going to interact to raise the satisfaction that media pole in city space can prevent giving direction to develop and trial and error about service ability, identity, and publicity. Finally, the media pole can be used as a fundamental element to suggest directions for change when viewed as future development.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.5
• /
• pp.79-91
• /
• 2011

In this paper, a DS (Data Synchronization) server for mobile communication environments is constructed and the suitability and the performance of its operations are validated. The DS server provides a way to update the newest data and keep data consistency for clients (mobile devices). In addition, the DS server constructed in this paper supports various synchronization types, and detects all changes and conflicts. In case of data conflicts, the DS server resolves the conflicts according to the several policies implemented in this work. The DS server conforms to the OMA(Open Mobile Alliance) DS standard protocol for interoperability with other mobile devices and servers. In addition to the transmission-by record scheme proposed by the OMA DS standard protocol, the DS server constructed in this paper also provides the transmission-by field scheme for the enhancement transmission performance between the server and clients. In order to validate its operations, data synchronization between the DS server and the SCTS (SyncML Conformance Test Suit), the suitability validation tool provided by the OMA, is performed. The validation results show that the DS server constructed in this paper satisfies all of the test cases except the Large Object function. The Large Object function will be implemented later because the function is not needed for the personal information synchronization process which this paper aims for. Also, synchronization times of the DS server are measured while increasing the number of data and clients. The results of the performance evaluations demonstrate that the DS server is scalable, in the sense that it has not suffered from any serious bottlenecks with respect to the number of data and clients. We expect that this work will provide a framework for various studies in the future for improving mobile DS operations.

• Journal of Distribution Science
• /
• v.10 no.6
• /
• pp.39-53
• /
• 2012

It is widely known that knowledge management plays a facilitating role that contributes to upgrading organizational performance. Knowledge management systems (KMS), especially, support the knowledge management process including the sharing, creating, and using of knowledge within a company, and maximize the value of knowledge resources within an organization. Despite this widely held belief, there are few studies that describe how companies actually develop, share, and practice their knowledge. Companies in the domestic small franchise sector, which are in the early stages in terms of knowledge management, need to improve their KMS to manage their franchisees effectively. From this perspective, this study uses a qualitative approach to explore the actual process of knowledge management implementation. This article presents a case study of PB (Paris Baguette) company, which is the first to build a KMS in the franchise industry. The study was able to confirm the following facts through the analysis of target companies. First, the chief executive's support is a critical success factor and this support can increase the participation of organization members. Second, it is important to build a process and culture that actively creates and leverages information in knowledge management activities. The organizational learning culture should be one where the creation, learning, and sharing of new knowledge is developed continuously. Third, a horizontal network organization is needed in order to make relationships within the organization more close-knit. Fourth, in order to connect the diverse processes such as knowledge acquisition, storage, and utilization of knowledge management activities, information technology (IT) capabilities are essential. Indeed, IT can be a powerful tool for improving the quality of work and maximizing the spread and use of knowledge. However, during the construction of an intranet based KMS, research is required to ensure that the most efficient system is implemented. Finally, proper evaluation and compensation are important success factors. In order to develop knowledge workers, an appropriate program of promotion and compensation should be established. Also, building members' confidence in the benefits of knowledge management should be an ongoing activity. The company developed its original KMS to achieve a flexible and proactive organization, and a new KMS to improve organizational and personal capabilities. The PB case shows that there are differences between participants perceptions and actual performance in managing knowledge; that knowledge management is not a matter of formality but a paradigm that assures the sharing of knowledge; and that IT boosts communication skills, thus creating a mutual relationship to enhance the flow of knowledge and information between people. Knowledge management for building organizational capabilities can be successful when considering its focus and ways to increase its acceptance. This study suggests guidelines for major factors that corporate executives of domestic franchises should consider to improve knowledge management and the higher operating activities that can be used.

• Journal of Intelligence and Information Systems
• /
• v.25 no.3
• /
• pp.221-238
• /
• 2019

Recently, companies and public institutions have been actively introducing chatbot services in the field of customer counseling and response. The introduction of the chatbot service not only brings labor cost savings to companies and organizations, but also enables rapid communication with customers. Advances in data analytics and artificial intelligence are driving the growth of these chatbot services. The current chatbot can understand users' questions and offer the most appropriate answers to questions through machine learning and deep learning. The advancement of chatbot core technologies such as NLP, NLU, and NLG has made it possible to understand words, understand paragraphs, understand meanings, and understand emotions. For this reason, the value of chatbots continues to rise. However, technology-oriented chatbots can be inconsistent with what users want inherently, so chatbots need to be addressed in the area of the user experience, not just in the area of technology. The Fourth Industrial Revolution represents the importance of the User Experience as well as the advancement of artificial intelligence, big data, cloud, and IoT technologies. The development of IT technology and the importance of user experience have provided people with a variety of environments and changed lifestyles. This means that experiences in interactions with people, services(products) and the environment become very important. Therefore, it is time to develop a user needs-based services(products) that can provide new experiences and values to people. This study proposes a chatbot development process based on user needs by applying the design thinking approach, a representative methodology in the field of user experience, to chatbot development. The process proposed in this study consists of four steps. The first step is 'setting up knowledge domain' to set up the chatbot's expertise. Accumulating the information corresponding to the configured domain and deriving the insight is the second step, 'Knowledge accumulation and Insight identification'. The third step is 'Opportunity Development and Prototyping'. It is going to start full-scale development at this stage. Finally, the 'User Feedback' step is to receive feedback from users on the developed prototype. This creates a "user needs-based service (product)" that meets the process's objectives. Beginning with the fact gathering through user observation, Perform the process of abstraction to derive insights and explore opportunities. Next, it is expected to develop a chatbot that meets the user's needs through the process of materializing to structure the desired information and providing the function that fits the user's mental model. In this study, we present the actual construction examples for the domestic cosmetics market to confirm the effectiveness of the proposed process. The reason why it chose the domestic cosmetics market as its case is because it shows strong characteristics of users' experiences, so it can quickly understand responses from users. This study has a theoretical implication in that it proposed a new chatbot development process by incorporating the design thinking methodology into the chatbot development process. This research is different from the existing chatbot development research in that it focuses on user experience, not technology. It also has practical implications in that companies or institutions propose realistic methods that can be applied immediately. In particular, the process proposed in this study can be accessed and utilized by anyone, since 'user needs-based chatbots' can be developed even if they are not experts. This study suggests that further studies are needed because only one field of study was conducted. In addition to the cosmetics market, additional research should be conducted in various fields in which the user experience appears, such as the smart phone and the automotive market. Through this, it will be able to be reborn as a general process necessary for 'development of chatbots centered on user experience, not technology centered'.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.41 no.2
• /
• pp.11-18
• /
• 2023

This study aims to distinguish what can be used in consideration of the national situation with Korea for Chinese Scenic and Historic Interest Areas, and the results are as follows; First, the Chinese Scenic and Historic Interest Areas expanded to the existing scenic cruise culture, travel, and tourism culture in the process of the influx of Western culture in the modern and contemporary era, and became popular as a travel destination. Accordingly, the Chinese government developed the tourism industry around the scenic sites, and thanks to the development of transportation and communication, the Scenic and Historic Interest Areas has become an important national heritage. This influenced the establishment of the system related to Scenic and Historic Interest Areas, and today, it is operated around the Scenic and Historic Interest Areas ordinance. Second, the designation of the Scenic and Historic Interest Areas is divided into the size of the site according to the area, and the process of selecting the Scenic and Historic Interest Areas classification, rating evaluation, and comprehensive value evaluation according to evaluation indicators and rating standards is carried out. Accordingly, according to the results of the classification, it is subdivided from the national level to the Scenic and Historic Interest Areas at the local level. Third, the central government is in charge of managing and supervising Scenic and Historic Interest Areas across the country, and the local government's construction department is in charge of supervising Scenic and Historic Interest Areas in the region. The management organization of Scenic and Historic Interest Areas established by local governments above the county level has a system that actually protects, utilizes, and manages Scenic and Historic Interest Areas. In addition, 14 detailed indicators are used to monitor Scenic and Historic Interest Areas. Based on these results, considering the application of the domestic scenic site policy, the method of developing the policy that has established the system from the perspective of the utilization of the people is worth considering. On the other hand, the evaluation of the designation and management system through the setting of various indicators has limitations in that it is difficult to secure objectivity in impressing or evaluating the landscape. Therefore, rather than blindly introducing quantified evaluation, it seems that guidance and promotion on how to expand consensus on scenic values and enjoy heritage should be prioritized.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.216-217
• /
• 2022

Gulpur 수력발전 프로젝트는 전력난을 겪고 있는 파키스탄에 102 MW 규모의 수력발전소를 건설하여 30년 동안 운영 관리한 후 파키스탄 정부로 양도하는 IPP(Independent Power Producing) 형식의 투자사업이다. 남동발전과 DL E&C, 롯데건설이 Sponsor로서 출자한 자본금과, ADB, IFC, K-EXIM 등의 대주단로부터의 차입금을 재원으로 하여 소요 사업비를 조달하고 사업을 개발하였다. DL E&C와 롯데건설이 EPC(Engineering, Procurement, Construction)를 수행하였고, 이산이 Design consultant의 역할을 수행하였다. Gulpur 수력발전 프로젝트의 발전형식은 수로식(run-of-river)으로 201 m³/s의 발전유량과 102 MW의 발전 시설용량을 이용하여 연평균예상발전량은 398 GWh이다. 주요 구조물로는 설계 재현빈도 1년의 유수전환시설(가물막이댐 & 가배수터널)과 콘크리트 중력식댐(H 67 m, L 205 m), 도수터널(D 6.7 m, L 215 m, 2기), 옥외형 발전소 (H 51 m, W 60 m, L 38 m, Kaplan 2기)가 있으며, 2015년 10월 착공하여 2020년 3월 상업발전을 시작하였다. 본 프로젝트는 DL E&C의 첫 번째 EPC 해외수력발전 프로젝트이다. 따라서 프로젝트의 성공적 수행을 위한 경제적 설계, 시공의 효율성 및 안정성 확보 등을 위하여 많은 연구를 수행하는 과정에서 다양한 기술 개선을 이룰 수 있었다. 본고에서는 Gulpur 프로젝트를 통하여 도출된 성공 사례들을 소개 및 공유하고자 한다. 첫 번째로 콘크리트 중력식댐 시공을 위한 유수전환시설의 최적 설계빈도를 산정하였다. 일반적으로 유수전환시설의 규모는 설계기준에 제시된 설계 재현빈도를 이용하는데, 해외 설계기준에서는 10년, 국내 설계기준에서는 1~2년으로 다르게 제시되어 있는 문제점이 있다. 유수전환시설의 규모는 프로젝트의 경제성에 큰 영향을 미치기 때문에 최적 설계빈도의 결정이 필요하며, 위험도분석기법(Risk Analysis)과 기대화폐가치법(Expected Monetary Value)을 이용하여 유수전환시설의 최적 설계 재현빈도와 이에 영향을 미치는 인자를 분석하였다. 위험도는 몬테카를로 시뮬레이션으로 산정된 가물막이댐 파괴확률과 재현빈도를 이용하여 산정된 가물막이댐 월류확률을 고려하였으며, 비용 및 피해액으로는 유수전환시설의 공사비, 가물막이댐 파괴시의 재건설비용과 지체보상금, 가물막이댐 월류시의 복구비용을 고려하였다. 이에 대한 연구결과로, 유수전환시설의 사용기간과 월류시의 복구비용이 유수전환시설의 설계 재현기간 결정에 가장 큰 영향을 미치는 것으로 나타났고, 특히 월류시의 복구비용이 작을수록 낮은 설계 재현빈도를 선택하는 것이 타당한 것으로 나타났다. 예를 들어, 유수전환시설의 사용기간이 3 ~ 5년, 복구비용이 0.5 ~ 1.0 mil USD 이하인 조건에서 가물막이시설의 최적 설계빈도는 1년 ~ 2년인 것으로 나타났다. 또한, 유수전환시설의 사용기간은 본댐의 규모와 시공기간 등을 고려하여 결정되는 사항으로 설계자가 임의 조정할 수 없지만, 복구비용은 시공 관리자에 따라 결정되는 부분으로, 적극적 홍수 피해 저감 및 복구방안을 마련하는 것이 프로젝트의 경제성을 향상시킬 수 있다는 것을 알 수 있었다. 두 번째로 프로젝트의 경제성 향상, 홍수기 댐 시공시의 안전성 확보를 위하여 홍수 조기경보시스템(Early Warning System)을 개발 및 활용하였다. 수로식(Run-of-river) 수력발전댐은 대부분 산악지역에 위치하기 때문에 국지성 강우 및 급한 지형 경사로 인하여 돌발홍수(flash flood)의 발생 가능성이 높다. 따라서 시공 중 홍수(월류) 발생을 미리 감지하고 현장에 전파할 수 있는, 수로식(Run-of-river) 수력발전댐 현장을 위한 홍수 조기경보시스템이 필요하며, 이를 리스크 인식, 모니터링 및 경보, 전파 및 연락, 반응 능력 향상의 4가지 부분으로 나누어 구축하였다. 리스크 인식 부분에서는 가물막이댐 월류 발생 상황에 대한 위험도, 취약성, 리스크를 제시하였으며, 모니터링 및 경보 부분에서는 상류 측정수위에서 유도된 현장 예상수위와 실제 현장 측정 수위를 대상으로 경보홍수위와 위험홍수위로 나누어 관리하였다. 전파 및 연락 부분에서는 현장 시공 조직을 활용하여 홍수시를 대비한 비상연락체계도(Emergency communication flow chart)를 운영하였으며, 반응 능력 향상을 위해 비상연락체계도의 팀별 Action plan을 상세화 하였다. 세 번째로 현장의 지질특성과 50여 차례 발파시험으로 현장 고유의 발파진동감쇄곡선을 도출하였으며, 이를 통해 현장의 시공성과 콘크리트 품질 확보를 동시에 달성할 수 있는 방안을 제시하였다. 콘크리트댐 공사에서는 제한된 공기 내에 공사를 완료하기 위해 사면부 굴착과 콘크리트 타설이 동시에 수행될 수밖에 없는 문제점을 가지고 있다. 그러나 신규 콘크리트 타설면 근처에서 발파를 수행하는 경우 발파로 발생되는 탄성파가 일정 수준을 초과하게 되면, 콘크리트 양생에 영향을 주게 된다. 따라서 다수의 현장 발파시험을 통해 발파거리와 최대진동속도의 상관관계 즉, 발파진동감쇄곡선을 도출함으로써 현장의 발파진동특성을 도출할 수 있었다. 또한, 기존 연구 논문들을 통해 콘크리트 재령기간 별 안전진동속도를 선정하고, 해당 안전진동속도를 초과하지 않는 범위에서 콘크리트 타설면과 발파위치의 거리에 따라 1회 발파 가능한 장약량을 산정하여 적용하였다. 이와 같은 체계적인 접근을 통해 콘크리트 타설과 발파 작업 동시 수행에 대한 논란을 해소할 수 있었다.