• World Technopolis Review
• /
• v.6 no.1
• /
• pp.5.1-5.12
• /
• 2017

The Republic of Korea developed a national project to construct a new administrative capital, Sejong city and to relocate administrative organizations of the central government for improvement of overpopulated capital, Seoul and regional balanced development. By the way, to relocate the central administrative organizations was not a sufficient condition for the sustainable development of the city. An industrial infrastructure development has been tried to attract universities, enterprises and research institutions in the region as a demand for internal growth power of the city was increased. In addtion, a basis for regional endogenous growth through projects to establish innovation system based on industry-academia cooperation was prepared as well. This paper reviews the major contents of the development plans for Tech-Valley project and looks into major introductory functions, characterization plans, strategies for fostering strategic industry, cooperation system of the inside and outside the region, and a strategy for building innovation platform. This case can be regarded as a significance of constructing technology infrastructure for the sustainable growth by preparing foundation for establishing innovation system and a cluster based on this system in the process of building and developing new city which did not have any industrial platform in the region.

• Journal of Mechanical Science and Technology
• /
• v.15 no.7
• /
• pp.876-888
• /
• 2001

For a large scaled optimization based on response surface methods, an efficient quadratic approximation method is presented in the context of the trust region model management strategy. If the number of design variables is η, the proposed method requires only 2η+1 design points for one approximation, which are a center point and tow additional axial points within a systematically adjusted trust region. These design points are used to uniquely determine the main effect terms such as the linear and quadratic regression coefficients. A quasi-Newton formula then uses these linear and quadratic coefficients to progressively update the two-factor interaction effect terms as the sequential approximate optimization progresses. In order to show the numerical performance of the proposed method, a typical unconstrained optimization problem and two dynamic response optimization problems with multiple objective are solved. Finally, their optimization results compared with those of the central composite designs (CCD) or the over-determined D-optimality criterion show that the proposed method gives more efficient results than others.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.12
• /
• pp.3040-3052
• /
• 2000

For effective construction of second-order response surface models, an efficient quad ratic approximation method is proposed in the context of trust region model management strategy. In the proposed method, although only the linear and quadratic terms are uniquely determined using 2n+1 design points, the two-factor interaction terms are mathematically updated by normalized quasi-Newton formula. In order to show the numerical performance of the proposed approximation method, a sequential approximate optimizer is developed and solves a typical unconstrained optimization problem having 2, 6, 10, 15, 30 and 50 design variables, a gear reducer system design problem and two dynamic response optimization problems with multiple objectives, five objectives for one and two objectives for the other. Finally, their optimization results are compared with those of the CCD or the 50% over-determined D-optimal design combined with the same trust region sequential approximate optimizer. These comparisons show that the proposed method gives more efficient than others.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.10
• /
• pp.1368-1374
• /
• 2005

To investigate the genetic relationships among various cattle breeds, bovine mtDNA D-loop region was used in 411 animals of 18 cattle breeds, including 8 Asian Bos taurus, 7 European Bos taurus, 1 Asian Bos indicus, and 2 African Bos indicus. The size of amplified PCR products from mtDNA D-loop region was 964 bp and the products were digested by 15 different restriction enzymes. Two different band patterns were identified in eight restriction enzymes (BstXI, Hae III, Msp I, Apa I, Taq I, Alu I, BamH I, EcoN I) and the rest of restriction enzymes showed more than 3 different band patterns among which Apo I and MspR9 resulted in 7 different restriction patterns. The genotypes, number of haplotype, effective number of haplotype, and degree of heterozygosity were analyzed. Based on all the PCR-RFLP data, different haplotypes were constructed and analyzed for calculating genetic distances between these breeds using Nei's unbiased method and constructing a phylogenetic tree.

• Journal of Cadastre & Land InformatiX
• /
• v.48 no.2
• /
• pp.213-225
• /
• 2018

For constructing three-dimensional (3D) spatial information occlusion region problem arises in the process of taking the texture of the building. In order to solve this problem, it is necessary to investigate the automation method to automatically recognize the occlusion region, issue it, and automatically complement the texture. In fact there are occasions when it is possible to generate a very large number of structures and occlusion, so alternatives to overcome are being considered. In this study, we attempt to apply an approach to automatically create an occlusion region based on learning by patterning the blocked region using the recently emerging deep learning algorithm. Experiment to see the performance automatic detection of people, banners, vehicles, and traffic lights that cause occlusion in building walls using two advanced algorithms of Convolutional Neural Network (CNN) technique, Faster Region-based Convolutional Neural Network (R-CNN) and Mask R-CNN. And the results of the automatic detection by learning the banners in the pre-learned model of the Mask R-CNN method were found to be excellent.

• Journal of KIISE:Software and Applications
• /
• v.36 no.2
• /
• pp.122-130
• /
• 2009

Conventional approaches for car number plate detection have dealt with those input images having similar sizes and simple background acquired under well organized environment. Thus their performance get reduced when input images include number plates with different sizes and when they are acquired under different lighting conditions. To solve these problem, this paper proposes a new scheme that uses the geometrical features of number plates and their topological information with reference to other features of the car. In the first step, those edges constructing a rectangle are detected and several pixels neighboring those edges are selected as the seed pixels for region growing. For region growing, color and intensity are used as the features, and the result regions are merged to construct the candidate for a number plate if their features are within a certain boundary. Once the candidates for the number plates are generated then their topological relations with other parts of the car such as lights are tested to finally determine the number plate region. The experimental results have shown that the proposed method can be used even for detecting small size number plates where characters are not visible.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.3
• /
• pp.381-395
• /
• 2023

This paper presents a GIS-based site suitability analysis for a smart hydrogen energy plant in the Gangwon-Do region, South Korea. A GIS-based multi-criteria decision analysis (MCDA) was implemented in this study to identify the most suitable sites for the development of smart hydrogen energy plants. The study utilizes various spatial data layers, including hydrogen generation potential and climatic conditions, environmental and topographic conditions, and natural catastrophic conditions, to evaluate the suitability of potential sites for the hydrogen energy plant. The spatial data layers were then used to rank and prioritize the sites based on suitability. The findings revealed that 4.26% of the study area, or 712.14 km², was suitable for constructing smart hydrogen energy plants. Some regions of Cheorwon-gun, Chuncheon-si, Wonju-si, Yanggu-gun, Gangneung-si, Hoengseong-gun, and near the coastal region along the east coast were found to be suitable for solar and wind energy utilization. The proposed MCDA provides a valuable tool for decision-makers and stakeholders to make informed decisions on the location of smart hydrogen energy plants and supports the transition to a sustainable and low-carbon energy system. Decision-makers can use the results of this study to select suitable sites for constructing smart hydrogen energy plants.

• Journal of architectural history
• /
• v.1 no.2 s.2
• /
• pp.9-38
• /
• 1992

In the study the documents in Ryu Hee-Choon's diary (Miahm-Ilgicho) from Oct. 29th 1575 to Feb. 9th 1577, for Kaeg-Chung(客聽) are arranged and analized. Ryu, Hee-Choon (Mi-ahm) was a civil minister in the era of Myung-Jong to Sun-Jo of the Chosun dinasty. This study would be one of the basal material for actually inquiring into the character of houses for the gentry in the late 16th century. Above all, the significance of this is that it study could show the details of the architectural economy, the organization of architectural society and the process of the supply of architectural material at that time. Craftsmen devoting themselves to this work are carpenters, artisans making roof titles, roofers and artisans constructing walls. And the content that are craftsmen of monks(僧匠), artisans of commoners(私匠) and slaves belong to government(官奴) is noticeable thing. In this construction work, monks in temples of the region and laboures commandeered by the government office are mainly mobilized. Except of them, private slaves and commoners mobilized by government office also devoted themselves to this work. But, it required more research whether this aspect could be the general character of the construction work of the gentry in the late 16th century. Architectural material, in the case of wood was cut and transported mostly from islands like Jin-do by labourers commandeered by the head officer of the region and monks. Superintendents seemed to come be non-specialists of noble families of the ruling class. So, it is thought that they managed mainly the manpower supply and administration. And some architectural ironworks, much provisions and marine products for labourers and craftsmen were proided by the government office of the region. This could be understood in the same context as above that goverment office of the region contributed to commandeering labourers and supplying architectural material in some degree. Carpenters and roofers took wages that is, about 7.7 pils(匹) of cotton cloth for each carpenter and 5 pils of cotton cloth and some provisions for each roofer. This would be a noticeable thing for researching wages of craftsmen at that time

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.12
• /
• pp.1873-1878
• /
• 2017

Both the introduction of the Renewable Energy Portfolio Standard (RPS) system into the electric energy market in 2012 and a decrease in the cost of constructing photovoltaic (PV) power plants have been increasing the number of MW PV plants in South Korea. Jeju Island is located at the center of three nations, South Korea, China and Japan, and its provincial government declared in 2012 that the island will be a clean region where greenhouse gases are not emitted by 2030. The Jeju provincial government is now doing its best to install PV plants and wind farms to realize a carbon-free island. In this study we investigated contribution of MW PV plants to the power of the electric grid during summer peak times on Jeju Island. Mt. Halla the highest mountain in South Korea, is located at the center of Jeju Island, and we divided the island into four regions and carried out analyses of a total of 24 PV plants. The average contribution of the PV plants in the respective region to electric power of Jeju Island during summer peak times was investigated and compared with those of the other regions. The best average contribution during the 12.5% maximum load period was obtained from the PV plants in the western region, and the value was 33% during 2015 and 2016.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.7
• /
• pp.1015-1025
• /
• 2015

The development of diverse polymyxin derivatives is needed to solve the toxicity and resistance problems of polymyxins. However, no platform has generated polymyxin derivatives by genetically engineering a polymyxin synthetase, which is a nonribosomal peptide synthetase. In this study, we present a two-step approach for the construction of engineered polymyxin synthetases by substituting the adenylation (A) domains of polymyxin A synthetase, which is encoded by the pmxABCDE gene cluster of Paenibacillus polymyxa E681. First, the seventh L-threonine-specific A-domain region in pmxA was substituted with the L-leucine-specific A-domain region obtained from P. polymyxa ATCC21830 to make polymyxin E synthetase, and then the sixth D-leucine-specific A-domain region (A_6-D-Leu-domain) was substituted with the D-phenylalanine-specific A-domain region (A_6-D-Phe-domain) obtained from P. polymyxa F4 to make polymyxin B synthetase. This step was performed in Escherichia coli on a pmxA-containing fosmid, using the lambda Red recombination system and the sacB gene as a counter-selectable marker. Next, the modified pmxA gene was fused to pmxBCDE on the chromosome of Bacillus subtilis BSK4dA, and the resulting recombinant strains BSK4-PB and BSK4-PE were confirmed to produce polymyxins B and E, respectively. We also succeeded in constructing the B. subtilis BSK4-PP strain, which produces polymyxin P, by singly substituting the A_6-D-Leu-domain with the A_6-D-Phe-domain. This is the first report in which polymyxin derivatives were generated by genetically engineering polymyxin synthetases. The two recombinant B. subtilis strains will be useful for improving the commercial production of polymyxins B and E, and they will facilitate the generation of novel polymyxin derivatives.