• IE interfaces
• /
• v.16 no.spc
• /
• pp.93-98
• /
• 2003

This paper addresses an AGV dispatching problem in semiconductor clean-room bays where AGVs move cassettes of wafers between machines or machines and a central buffer. Since each machine in a bay has a local buffer of limited capacity, material flow should be controlled in a careful way to maintain high system performance. It is regarded that two most important performance measures in a semiconductor bay are throughput rate and lead-time. The throughput rate is determined by a bottleneck resource and the lead-time depends on smooth material flow in the system. This paper presents an AGV dispatching procedure based on the concept of theory of constraints (TOC), by which dispatching decisions are made to utilize the bottleneck resource at the maximum level and to smooth the flow of material. The new dispatching procedure is compared with existing dispatching rules through simulation experiments.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2002.05b
• /
• pp.829-836
• /
• 2002

The paper presents a multi-objective genetic algorithm approach to the design of a water distribution network. The objectives considered are minimization of network cost and maximization of a reliability measure. In this study, a new reliability measure, called network resilience, is introduced. This measure mimics a designer's desire of providing excess power at nodes and designing reliable loops with practicable pipe diameters. The proposed method produces a set of Pareto-optimal solutions in the search space of cost and network resilience. Genetic algorithms are observed to be poor in handling constraints. To handle constraints in a better way, a constraint handling technique that does not require a penalty coefficient and applicable to water distribution systems is presented. The present model is applied to two example problems, which were widely reported. Pipe failure analysis carried out on some of the solutions obtained revealed that the network resilience based approach gave better results in terms of network reliability.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.117.1-117
• /
• 2001

A motion handling technique that transforms existing animation motion data to a mathematically well-defined form. The transformed data can be utilized in any kind of autonomous motion creation process that handles such cases as changed environment, structure (kinematic / dynamic) modification, or changed constraints. To overcome the computational burden of traditional spacetime optimization, we divide full motion data frame into several parts, and we applied the transformation technique to each part using an optimizing tool(CFSQP). To show Ire feasibility of the proposed method, a comparison study results with traditional technique is included.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1353-1355
• /
• 2003

Genetic algorithms (GA) is a well known technique that is capable of handling multiobjective functions and discrete constraints in the process of numerical optimization. Together with the Pareto ranking scheme, more than one possible solution can be obtained despite the imposed constraints and multi-criteria design functions. In view of this unique capability, the design of the log-periodic dipole antenna array (LPDA) using this special feature is proposed in this paper. This method also provides gain, front-back level and S parameter design tradeoff for the LPDA design in broadband application at no extra computational cost.

• Transactions on Control, Automation and Systems Engineering
• /
• v.2 no.4
• /
• pp.221-227
• /
• 2000

This paper combines the constrained model predictive control with the feedback linearization to solve a nonlinear system control problem with input constraints. The combined approach consists of two steps: Firstly, the nonlinear model is linearized by the feedback linearization. Secondly, based on the linearized model, the constrained model predictive controller is designed taking input constraints into consideration. The proposed controller is applied to two link robot system, and tracking performances of the controller are investigated via some simulations, where the comparisons are done for the cases of unconstrained, constrained input in feedback linearization.

• Nuclear Engineering and Technology
• /
• v.56 no.10
• /
• pp.4437-4445
• /
• 2024

During the process of bilateral teleoperation, operators not only need to perform complex maintenance tasks but also have to constantly monitor the safety of the operation, leading to reduced operational efficiency. Therefore, in this paper, we introduce a shared autonomous scheme that intervenes in the operator's command input when necessary, autonomously ensuring the safe operation of the manipulator by employing a rolling horizon planning controller based on Nonlinear Model Predictive Control (NMPC). This controller considers the motion boundaries and collision avoidance constraints of the manipulator, accompanied by the design of corresponding objective functions. To validate the effectiveness of the proposed method, we conduct tests on collision-free trajectory tracking and comprehensive performance with collision constraints, confirming the feasibility and excellent performance of the approach.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4999-5008
• /
• 2015

The application of efficient constraint handling technique is fundamental method to find better solutions in engineering optimization problems with constraints. In this research four of constraint handling techniques are used with a meta-heuristic optimization method, harmony search algorithm, and the efficiency of algorithm is evaluated. The sample problem for evaluation of effectiveness is one of the typical discrete problems, optimal pipe size design problem of water distribution system. The result shows the suggested constraint handling technique derives better solutions than classical constraint handling technique with penalty function. Especially, the case of ${\varepsilon}$-constrained method derives solutions with efficiency and stability. This technique is meaningful method for improvement of harmony search algorithm without the need for development of new algorithm. In addition, the applicability of suggested method for large scale engineering optimization problems is verified with application of constraint handling technique to big size problem has over 400 of decision variables.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.6
• /
• pp.785-795
• /
• 2019

This paper is a study on the modeling of the quantity estimation model for offshore plant Material handling equipment in FEED(Front End Engineering Design) verification stage using system engineering approach which is an engineering design methods. The relevant engineering execution procedure is not systemized although the operation method and Material handling equipment selection with weight and space constraints is a key part of the FEED. Using the system engineering process, the stakeholder requirements analysis process, the system requirements analysis, and the final system architecture design were sequentially performed, and the process developed through the functional development diagram and Requirement traceability matrix (RTM) was verified. In addition, based on the established process, we propose a Material handling quantity estimation model and Quantity calculation verification Table that can be applied at the FEED verification stage and we verify the applicability through case studies.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.486-489
• /
• 2006

This paper presents a newly proposed object-oriented finite element framework and its applications on dynamic analysis of plate girder bridge. The developed framework supports various types of finite elements, materials, constraints, loads, and solution methods. One major feature different from other object-oriented finite element programs is that static model and dynamic state can be easily read from or written to a file. In addition, the framework supports efficient DOF pattern handling for a node connecting elements with different DOF patterns, new multi-point constraint handling, and various scripting languages for easy use of the library. In order to show the applicability to dynamic analysis, dynamic moving load analysis on plate girder bridge is performed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.1 s.232
• /
• pp.96-106
• /
• 2005

An integrated single-wafer processing tool, composed of multiple single wafer processing modules, transfer robots, and load locks, has complex routing sequences, and often has critical post-processing residency constraints. Scheduling of these tools is an intricate problem, and testing schedulers with actual tools requires too much time and cost. The Single Wafer Processor (SWP) simulator presented in this paper is to validate an on-line scheduler, and evaluate performance of integrated single-wafer processing tools before the scheduler is actually deployed into real systems. The data transfer between the scheduler and the simulator is carried out with TCP/IP communication using messages and files. The developed simulator consists of six modules, i.e., GUI (Graphic User Interface), emulators, execution system, module managers, analyzer, and 3D animator. The overall framework is built using Microsoft Visual C++, and the animator is embodied using OpenGL API (Application Programming Interface).