• 한국통신학회논문지
• /
• 제14권5호
• /
• pp.549-560
• /
• 1989

본 논문은 광대역 신호처리 DCMP 알고리즘에서 필터로서 동작하는 초기가중치의 설정 방법을 제안하였고 컴퓨터 시뮬레이션을 통해 최적의 Tap 수를 결정하는 방법을 기술하였다. 광대역 비임 형성기를 FiR 필터 개념으로 분석하여 원하는 신호의 입사 방향에 대한 제한 조건을 얻었고 이 제한 조건으로 부터 적응 속도가 빠른 초기 가중치를 설정하였다. 본 논문에서 제안된 초기 가중치를 기존의 DCMP프로세서나 공간 영역 평균법을 수행하는 프로세서에 적용할 때 원하는 신호의 입사 방향과 일치하는 잡음 그리고 Cohenrent Noise를 반복 적용하는 과정에서 동시에 제거할 수 있음을 컴퓨터 시뮬레이션으로 확인 하였다.

• Structural Engineering and Mechanics
• /
• 제52권1호
• /
• pp.149-172
• /
• 2014

Four algorithms for damage detection of trusses are presented in this paper. These approaches can detect damage by using both complete and incomplete measurements. The suggested methods are based on the minimization of the difference between the measured and analytical static responses of structures. A non-linear constrained optimization problem is established to estimate the severity and location of damage. To reach the responses, the successive quadratic method is used. Based on the objective function, the stiffness matrix of the truss should be estimated and inverted in the optimization procedure. The differences of the proposed techniques are rooted in the strategy utilized for inverting the stiffness matrix of the damaged structure. Additionally, for separating the probable damaged members, a new formulation is proposed. This scheme is employed prior to the outset of the optimization process. Furthermore, a new tactic is presented to select the appropriate load pattern. To investigate the robustness and efficiency of the authors' method, several numerical tests are performed. Moreover, Monte Carlo simulation is carried out to assess the effect of noisy measurements on the estimated parameters.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.251-256
• /
• 1999

In the preliminary design stage of Prestressed Concrete (PSC) Box Girder Bridges, the design factors(including depth, thickness of web, and jacking force) decided by inexperience designer could heavily affect the final design factors. So there is a possibility that the design ends up with an excessively wasteful design. To aim at an economical design with preventing an excessive design, the optimal design program has been developed by using ADS optimal program and SPCFRAME(PSC Bridge analysis program) in these studies. The optimal design program automatically calculates economically optimized design studies. The optimal design program automatically calculates economically optimized design factors by introducing the optimal design techniques of PSC box girder bridge design. The objective function for optimal design is material cost of box girder and constrained functions are constituted with design specifications and workability. The optimal design techniques used the Sequential Unconstraint Minimization Technique (SUMT) with performing the optimal design program. In this study, We designed unprismatic section bridge and prismatic section bridge in the same design condition by optimal design program developed in this study. By analyzing the results we suggested the practical form of tendon's layout comparing the optimal desingns on the basis of each tendon's layout.

• Journal of applied mathematics & informatics
• /
• 제26권5_6호
• /
• pp.1149-1159
• /
• 2008

Blind source extraction (BSE) is a special class of blind source separation (BSS) methods, which only extracts one or a subset of the sources at a time. Based on the time delay of the desired signal, a simple but important extraction algorithm (simplified " BC algorithm")was presented by Barros and Cichocki. However, the performance of this method is not satisfying in some cases for which it only carries out the constrained minimization of the mean squared error. To overcome these drawbacks, ICA with reference (ICA-R) based approach, which considers the higher-order statistics of sources, is added as the second stage for further source extraction. Specifically, BC algorithm is exploited to roughly extract the desired signal. Then the extracted signal in the first stage, as the reference signal of ICA-R method, is further used to extract the desired sources as cleanly as possible. Simulations on synthetic data and real-world data show its validity and usefulness.

• 대한전자공학회논문지
• /
• 제25권10호
• /
• pp.1263-1273
• /
• 1988

LMS 기법을 이용한 적응 신호 처리상에서 복합적으로 제기 되어온 간섭신호 제거, 수렴속도, 오차조정 및 기준신호 발생 등의 전체적인 문제점들을 합성적으로 고려한 하나의 적응 기법이 제시된다. 제안된 방법은 최소화 적응 처리를 하기전에 먼저 어레이 입력으로 들어오는 복합신호로부터 표적신호를 분리하고, 기준신호를 제거한다. 본 기법은 적응처리기에 있는 잔유잡음의 정도에 제한을 둔다. 분석결과 본 기법은 코히어런트 또는 인코히어런트 간섭신호 제거에 효과적이며 특히, 수렴계수의 동적범위가 넓어 안정도가 좋고 수렴속도가 빠르며 평균자승오차가 매우적다. 또한, 기준신호발생이 필요없다는 장점이 있다. 시뮬레이션 결과는 이론적인 예측과 일치한다.

• Advances in Automotive Engineering
• /
• 제1권1호
• /
• pp.105-121
• /
• 2018

The hybrid electric powertrain is a robust solution that allows for major improvements in both fuel economy and emission reduction. In the present study, a through-the-road hybrid vehicle model with an electric motor driving the rear axle and an Internal Combustion Engine (ICE) driving the front axle has been constructed. We then present a systematic method for the determination of a real time applicable optimal Energy Management Strategy (EMS) for a hybrid road vehicle. More precisely, we compare the performance of rule-based EMS strategies to an optimization-based strategy, namely ECMS (Equivalent Consumption Minimization Strategy). The comparison is conducted in parallel with a parameterization of the size of the internal combustion engine and the implementation of a Continuously Variable Transmission (CVT) that allows following the line of best fuel economy. For the FTP-75 driving cycle, the constrained engine On-off control algorithm is shown to offer a 28% improvement potential of fuel consumption compared to the conventional internal combustion engine while the ECMS strategy achieves an improved potential of nearly 33%.

• 전자공학회논문지
• /
• 제52권6호
• /
• pp.3-9
• /
• 2015

본 논문에서는 짧은 지연시간을 요구하는 CDMA 시스템 환경에서 전송률 스케줄링과 전력량 할당 문제를 연구한다. 구체적으로, 본 논문은 각각의 단말이 짧은 구간 동안의 평균 전송률을 유지하는 동시에 에너지 효율적인 스케줄링 방안을 제안한다. 다중 코드를 적용한 CDMA 시스템을 고려하며, 각각의 코드는 가상의 사용자로 해석할 수 있다. 논문의 최종 목적은 전송률 과정에서 소모하는 에너지가 최소화되도록 각각의 시간슬럿에 가상의 사용자를 스케줄링하는 방안을 제안하는 것이다. 주목할만한 점은, 본 논문에서 고려하는 전송률 최적화 문제가 최단 경로 알고리즘으로 해결 가능하다는 점이다. 마지막으로, 본 논문이 제안하는 에너지 최적화 스케줄링 방안을 TDMA 형식의 스케줄링 방안과 성능 비교 분석한다.

• 한국통신학회논문지
• /
• 제21권7호
• /
• pp.1685-1695
• /
• 1996

The postprocessing of compressed images based on the projections onto convex sets and the constrained minimization imposes several constraints on the procesed data. The quantization constraint has been commonly used in various algorithms. Quantization is many-to-one mapping, by which all the dat in a quantization region are mapped to the corresponding representative level. The basic idea behind the projection onto the QCS(quantization constraint set) is to prevent the processed data from diverging from the original quantization region in order to redue the artifacts caused by filtering in postprocessing. However, there have been few efforts to analye the POQCS(projection onto the QCS). This paper analyzed mathematically the POQCS of filtered data from the viewpoint of minimizing the mean square error. Our analysis shows that a proper filtering technique followed by the POQCS can reduce the quantization distortion. In the conventional POQCS, the outside data of each quantization region are mapped into the corresponding boundary. Our analysis also shows that mappingthe outside data to the boundary of a subregion of the quantization region yields lower distortion than does the mapping to the boundary of the original region. In addition, several examples and discussions on the theory are introduced.

• 설비공학논문집
• /
• 제7권4호
• /
• pp.566-576
• /
• 1995

A Computational code has been developed in order to design axial fans by the numerical optimization techniques incorporated with flow analysis code solving three-dimensional Navier-Stokes equation. The steepest descent method and the conjugate gradient method are used to look for the search direction in the design space, and the golden section method is used for one-dimensional search. To solve the constrained optimization problem, sequential unconstrained minimization technique, SUMT, is used with imposed quadratic extended interior penalty functions. In the optimization of two-dimensional cascade design, the ratio of drag coefficient to lift coefficient is minimized by the design variables such as maximum thickness, maximum ordinate of camber and chord wise position of maximum ordinate. In the application of this numerical optimization technique to the design of an axial fan, the efficiency is maximized by the design variables related to the sweep angle distributed by quadratic function along the hub to tip of fan.

• Journal of Communications and Networks
• /
• 제18권2호
• /
• pp.173-181
• /
• 2016

In this paper, we address a new robust optimization problem in a multiuser multiple-input single-output broadcasting system with simultaneous wireless information and power transmission, where a multi-antenna base station (BS) sends energy and information simultaneously to multiple users equipped with a single antenna. Assuming that perfect channel-state information (CSI) for all channels is not available at the BS, the uncertainty of the CSI is modeled by an Euclidean ball-shaped uncertainty set. To optimally design transmit beamforming weights and receive power splitting, an average total transmit power minimization problem is investigated subject to the individual harvested power constraint and the received signal-to-interference-plus-noise ratio constraint at each user. Due to the channel uncertainty, the original problem becomes a homogeneous quadratically constrained quadratic problem, which is NP-hard. The original design problem is reformulated to a relaxed semidefinite program, and then two different approaches based on convex programming are proposed, which can be solved efficiently by the interior point algorithm. Numerical results are provided to validate the robustness of the proposed algorithms.