• Journal of the Society of Naval Architects of Korea
• /
• 제55권1호
• /
• pp.56-65
• /
• 2018

Pressure oscillation caused by the compressibility of entrapped air in dam break flow is analyzed using an open source code, which is a two-phase compressible code for non-isothermal immiscible fluids. Since compressible flows are computed based on a pressure-based method, the code can handle the equation of state of barotropic fluid, which is virtually incompressible. The computed time variation of pressure is compared with other experimental and computational results. The present result shows good agreements with other results until the air is entrapped. As the entrapped air bubbles pulsate, pressure oscillations are predicted and the pressure oscillations damp out quickly. Although the compressibility parameter of water has been varied for a wide range, it has no effects on the computed results, because the present equation of state for water is so close to that of incompressible fluid. Grid independency test for computed time variation of pressure shows that all results predict similar period of pressure oscillation and quick damping out of the oscillation, even though the amplitude of pressure oscillation is sensitive to the velocity field at the moment of the entrapping. It is observed that as pressure inside the entrapped air changes quickly, the pressure field in the neighboring water adjusts instantly, because the sound of speed is much higher in water. It is confirmed that the period of pressure oscillation is dominated by the added mass of neighboring water. It is found that the temperature oscillation of the entrapped air is critical to the quick damping out of the oscillations, due to the fact that the time averaged temperature inside the entrapped air is higher than that of surrounding water, which is almost constant.

• Journal of the Korea Society for Simulation
• /
• 제23권4호
• /
• pp.41-49
• /
• 2014

Detection and processing techniques for small objects on seabed by the active synthetic aperture sonar can be increased the detection performance because it can be used by short sensor array in small unmanned underwater systems that are spatially constrained. But the limited conditions on constant speed and straight movement of the platform cause a large error in the number of external environmental factors and exact phase synthesis process. In this study, analyzed the applicability of active synthetic aperture processing that is mounted on such a system, and compared detection resolution change in accordance with the phase difference mismatch caused by the along track disturbance. Various simulations were performed as a coherently focus processing model by adding along track disturbance mismatched parameter on the configuring simulator. As the result, detection performance of active synthetic processing for small objects on seabed was found a number of changes by the phase difference mismatch errors according to track disturbances and S/N ratio variations.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• 제35권2호
• /
• pp.132-136
• /
• 1990

This experiment was conducted to study the multiplication and spread of bacterial population in water exuded through the hydathode of infected leaf of Xanthomonas campestris pv. oryzae in resistant and susceptible rice cultivars to bacterial leaf blight. The results obtained are summarized as follows. The bacterial multiplication in resistant cultivars was almost constant from three days to twelve days after inoculation with population of 10$^3$-10$^4$cfu/$\textrm{cm}^2$, but the multiplication was increased as days after inoculation extended in susceptible cultivars. The speed of bacterial multiplication and the number of bacteria spread above and below the inoculated position were closely related with the resistance of rice cultivars to bacterial leaf blight. The bacterial multiplication and spread were observed throughout the all growing stages including seedling, maximum tillering and flag leaf stages. The bacterial populations in water exuded through the hydathode were dependent on the multiplication and spread, and the populations were also closely related with the resistance of rice cultivars.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• 제14권1호
• /
• pp.93-99
• /
• 2014

This paper deals with the FC-MMA (Fast Convergence-Multi Modulus Algorithm) which is improving the convergence characteristics of the MMA (Multiple Modulus Algorithm) adaptive equalization algorithm that is used for the minimization of the intersymbol interference which occurs in the time dispersive communication channel. In the time varying charateristics and the abnormal situation like as outage of the communication channel, the adaptive equalizer needs to adapting the new environment more rapidly. For this problem, the residual isi and the maximum distortion performance index which are meaning the convergence characteristics are widely adapted in the adaptive equalizer. The 16-QAM signal is transmitted and it was confirmed that the proposed algorithm, the FC-MMA has the fast convergence performance such as in the 1.75 times fast in residual isi and 2.5 times fast in the maximum distortion in order to reaching the steady state compare to the MMA algorithm in the same channel environment by the computer simulation.

• Journal of Institute of Control, Robotics and Systems
• /
• 제3권4호
• /
• pp.381-388
• /
• 1997

This paper proposes a heuristic algorithm to efficiently perform line balancing in the PCB assembly line including multiple surface mounters efficiently. Generally, the problems in line balancing are classified into two kinds. Firstly, is the determining of the minimum number of machines required for achieving the desired production rate. Secondly, is the assign of jobs to multiple machines in order to minimize the cycle time which is defined as a maximum among the working times of machines when the number of machines is fixed. In this paper, we deal with the latter. We consider a PCB assembly line, including the multiple surface mounters arranged serially as a target system. Also, the conveyor is assumed to move at a constant speed and have no buffer. Considering that the minimum number of machines required for the desired production rate is a discrete nonincreasing function which is inversely proportional to the cycle time, we propose an optimization algorithm for line balancing by using the binary search method. The algorithm is validated through computer simulation, the results of which show that their shapes coincide nearly with those of optimal line balancing efficiency graphs regardless of the number of components, the performance of surface mounters, and the structure of assembly line.

• The Journal of Korean Academy of Prosthodontics
• /
• 제20권1호
• /
• pp.25-32
• /
• 1982

An in vitro study was conducted to compare the bond strength of cements between Verabond coping and various cores. Fifty-four idential cores simulating maxillary central incisor prepared for PFM crowns were made. Eighteen samples were made with 20K cast gold, eighteen with Verabond, and eighteen with Adaptic. Samples were randomly divided into three groups, each consisting of six 20K cast gold, six verabond, and six Adaptic samples. The first group was cemented with zinc phosphate cement, the second group with poly-carboxylate cement, and the third group with glass ionomer cement. Constant finger pressure was applied for cementation. The sample were then stored at $37^{\circ}C$ in distilled water bath for 24 hours. The tensile strength test was performed on an Instron Universal test machine with crosshead speed of 0.05cm/min and the results compared statistically. Results of the study showed that: 1. A significant difference of bond strength was observed with different types of dental cements and core materials. 2. With gold core, zinc phosphate cement was stronger than both the polycarboxylate cement and glass ionomer cement, which did not differ in bond strength. 3. With base-metal core, zinc phosphate cement showed the highest bond strength and was followed by polycarboxylate cement and glass ionomer cement. 4. With composite resin core, zinc phosphate cement showed the highest bond strength and was followed by glass ionomer cement and polycarboxylate cement. 5. The base-metal core (Verabond core) privided the highest retention of all core materials.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• 제66권4호
• /
• pp.682-691
• /
• 2017

In this paper, we propose the fusion design methodology of both pedestrian detection and object tracking system realized with the aid of HOG-PCA based RBFNN pattern classifier. The proposed system includes detection and tracking parts. In the detection part, HOG features are extracted from input images for pedestrian detection. Dimension reduction is also dealt with in order to improve detection performance as well as processing speed by using PCA which is known as a typical dimension reduction method. The reduced features can be used as the input of the FCM-based RBFNNs pattern classifier to carry out the pedestrian detection. FCM-based RBFNNs pattern classifier consists of condition, conclusion, and inference parts. FCM clustering algorithm is used as the activation function of hidden layer. In the conclusion part of network, polynomial functions such as constant, linear, quadratic and modified quadratic are regarded as connection weights and their coefficients of polynomial function are estimated by LSE-based learning. In the tracking part, object tracking algorithms such as mean shift(MS) and cam shift(CS) leads to trace one of the pedestrian candidates nominated in the detection part. Finally, INRIA person database is used in order to evaluate the performance of the pedestrian detection of the proposed system while MIT pedestrian video as well as indoor and outdoor videos obtained from IC&CI laboratory in Suwon University are exploited to evaluate the performance of tracking.

• Preventive Nutrition and Food Science
• /
• 제15권2호
• /
• pp.88-91
• /
• 2010

This study examined the effects of Korean red ginseng (RG) on muscle injury induced by eccentric exercise. Eighteen college male students were randomly assigned to either the RG group or the placebo group (P). The RG group ingested RG extract at 20 g/day (mixed with 200 mL of water) for 7 days prior to performing a downhill treadmill exercise and for 3 days after performing the downhill treadmill exercise, while the P group ingested 200 mL of water containing Agastachis Herba for 7 days prior to and 3 days following a downhill treadmill exercise. All subjects performed 2 bouts of a downhill treadmill exercise (6 km, -14 degree slope, 12 km/hr speed) with a 5 minute resting interval between bouts. Blood samples were drawn immediately before and after exercise, and at 1 hr, 24 hr, 48 hr, and 72 hr. Two-way repeated ANOVA documented that creatine kinase (CK) levels in the RG group were significantly reduced at 48 hr after exercise, as compared with P group, and remained constant until 72 hr after exercise. Lactate levels in the RG group were also significantly lower at 24 hr and 72 hr after exercise as compared to the P group. We conclude that supplementation of RGreduces CK levels and may prevent muscle injury induced by eccentric exercise.

• Advances in materials Research
• /
• 제2권3호
• /
• pp.133-140
• /
• 2013

This paper aims to focus on the microwave processing of thick films which is a fast, cheap technique and could be the alternative to the currently used conventional high temperature processing technique. Microwave processing has gained worldwide acceptance as a novel method for heating and sintering a variety of materials, as it offers specific advantages in terms of speed, energy efficiency, process simplicity, finer microstructures and lower environmental hazards. Silver conducting thick films were prepared and processed in the household microwave oven. The films sintered at different time period by keeping the other parameter such as microwave power, film thickness etc constant. The microstructure analysis revealed that the surface morphology of the microwave processed films become compact with respect to the processing time. The sheet resistance for microwave sintered silver films is in the range of 0.003 to $1.207{\Omega}/{\Box}$ where as the films fired at 750 and $850^{\circ}C$ showed the resistance of 0.009 and $0.003{\Omega}/{\Box}$ which can be comparable. The results revealed that the microstructure of the microwave sintered films has more uniform and compact surface than that of the conventionally fired films. The paper reports upon the preparation of silver thick film by screen printing technique and processing the same by microwave which also compared with the conventionally processed thick films.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• 제26권7호
• /
• pp.1031-1038
• /
• 2002

The pressure sensitive paint (PSP) has recently received a considerable attention in the fields of aerodynamics and fluid mechanics as a new revolutionary optical technique to measure pressure fields on a body surface. In this study, the feasibility and effectiveness of the PSP pressure field measurement technique have been investigated experimentally. Seven different PSP formulations including two porphyrins(PtOEP and PtTFPP) and four polymers(Polystyrene, cellulous acetate butyrate, GP-197 and Silicon-708) were tested to check the performance and characteristics of each combination. The static calibration of each PSP formulation was carried out in a constant-pressure chamber. The PSP technique was applied to an oblique impinging jet flow to measure variation of pressure field on the impinging plate at on oblique jet angle of ${\theta}=60^{\circ}$. Pressure field images were captured by an 12bit intensified CCD(ICCD, $1K{\times}1K$)camera. As a result, the dynamic response of PSP depends on the oxygen permeability of polymer and the photochemical interaction between luminophore and polymer as well as the reaction of luminophore itself. The reaction of luminophore was changed by employing different polymers. In conclusion, Among 7 PSP formulation tested, the combination of PtTFPP and cellulous acetate butyrate show the best performance. In addition, the detail pressure field of an oblique high-speed impinging jet was measured effectively using the PSP technique.