• KIEE International Transactions on Power Engineering
• /
• v.4A no.2
• /
• pp.51-57
• /
• 2004

This paper describes the dynamic performance of a variable speed wind turbine system responding to a wide variety of wind variations. Modeling of the wind generation using power electronics interface is proposed for dynamic simulation analysis. Component models and equations are addressed and their incorporations into a transient analysis program, PSCAD/EMTDC are provided. A wind model of four components is described, which enables observing dynamic behaviors of the wind turbine resulting from wind variations. Controllable power inverter strategies are intended for capturing the maximum power under variable speed operation and maintaining reactive power generation at a pre-determined level for constant power factor control or voltage regulation control. The components and control schemes are modeled by user-defined functions. Simulation case studies provide variable speed wind generator dynamic performance for changes in wind speed

• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.99-104
• /
• 2015

In this study, it has been initiated to investigate the specific abnormal vibration signal that has been captured in the power equipment. Array Microphone can be used in order to detect the direction and the position of the noise source. It is possible to track the abnormal mechanical noise in the power plant by utilizing the program and the microphone array system developed from this research. Array microphone system can be operated as a constant monitoring system.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.619-621
• /
• 1996

This paper presents the study on the development of the power factor correction convener with ZVT Boost converter, which is better than the conventional PWM Boost converter to increase the switching frequency for high density and lower stress of switch. A simple DC and small signal model for the power factor correction converter with constant switching frequency is derived. The guide line for design of controller is summarized.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.195-196
• /
• 2017

This paper proposes a permanent magnet synchronous motor(PMSM) control using a repetitive controller. Repetitive controllers are often used to eliminate periodic disturbances. Based on this, it is possible to alleviate the torque disturbance occurring at a constant cycle to the load of the motor. This paper proposes a method of rejecting periodically generated disturbances by using a repetitive controller and verified by simulation.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1015_1016
• /
• 2009

최근 대체조명으로 Power LED가 각광받고 있다. 그러나 반도체 소자인 Power LED의 특성에 의해 기존의 정전압 제어방식으로는 적절한 제어에 어려움이 있다. 이러한 문제의 해결책으로 본 연구에서는 Power LED를 MCU(Micro Controller Unit)를 이용한 디지털 정전류 제어방법에 대하여 서술하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.03b
• /
• pp.10-10
• /
• 2010

The solar cell energy is considered as a clean energy source in the world. However, because the output of solar cell is not constant, it needs to study the relationships of the DC voltage, the DC current and the DC power of the solar cell. This paper presents the solar cell output characteristics and the maximum power point of the solar cell under different irradiation conditions.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.909-912
• /
• 1999

This paper describes realized APC and pre-equalizer circuit, and their operation principle and test results. In analog optical transmitter, constant lasing power control, free of signal clipping and linearity are important considerations. We examined pre-equalizer and APC(Automatic Power Control) circuit to improve the analog optical transmitter performance.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.1-6
• /
• 1998

To achieve fast control action, direct control methods should be used. "Direct Mean Torque Control" (DMTC) combines the good dynamic performance of Direct Torque Control (DTC) with the advantages of inherently constant switching frequency and time equidistant control for implementation in a digital signal processor. Since DMTC is a predictive control algorithm, the model and its correction deserves special investigations. This paper proposes a steady-state Kalman filter which is well suited for fast computation.mputation.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.411-417
• /
• 2009

This paper describes the development of integrated simulator for traction power supply system with GUI (Graphic User Interface). This simulator consists of a lot of calculation modules such as TPS, time table, line constant, and power supply system analysis. Each module has input and output structure respectively. The proposed simulator is tested on both high speed railway line and metropolitan subway line. The test has confirmed the function of the developed simulator.

• Korean Chemical Engineering Research
• /
• v.53 no.3
• /
• pp.269-275
• /
• 2015

The adsorption characteristics of ions were evaluated for the nitrate-selective carbon electrode (NSCE) in accordance with power supply methods. The NSCE was fabricated by coating the surface of a carbon electrode with anion-exchange resin powders with high selectivity for the nitrate ion. Capacitive deionization (CDI) experiments were performed on a mixed solution of nitrate and chloride ion in constant voltage (CV) and constant current (CC) modes. The number of total adsorbed ions in CV mode was 15% greater than that in CC mode. The mole fraction of adsorbed nitrate ion showed the maximum 58%, though the mole fraction was 26% in the mixed solution. This indicates that the fabricated NSCE is highly effective for the selective adsorption of nitrate ions. The mole fraction of adsorbed nitrate was nearly constant value of 55-58% during the adsorption period in CC mode. In the case of CV mode, however, the values increased from the initial 30% to 58% at the end of adsorption. We confirmed that the current supplied to cell is important factor to determine the selective removal of nitrate.