• Journal of Wetlands Research
• /
• v.19 no.1
• /
• pp.90-102
• /
• 2017

In this study, various types of nutrient models were tested by using two tears's water quality data collected from the stormwater wetland in Korea. Based on results, most important factor influencing nitrogen removal was hydraulic loading rate, which indicates that surface area of wetland is more important than its volumetric capacity, and model proposed by WEF was found to give a least error between measured and calculated values. For the phosphorus, in case assuming a power relationship between rate constant and temperature, the best prediction result were obtained, but temperature was most sensitive parameter affecting phosphorus removal. In addition, denitrification was always a limiting step for the nitrogen removal in this particular wetland mostly due to the lack of carbon source and high dissolved oxygen concentration. In this paper, several alternatives to improve nitrogen removal, including proper arrangement and designation of wetland elements and use of floating plants or synthetic fiber mat to control oxygen level and to capture the algal particles were proposed and discussed.

• International Journal of Highway Engineering
• /
• v.15 no.2
• /
• pp.29-37
• /
• 2013

PURPOSES : This study aims to review the possibility of developing a road snow-melting system that can prevent slip accidents by maintaining a constant temperature of the winter roads and enhance performance of structures, including improvement of compressive strength by mixing carbon nanotube (hereafter referred to as CNT) with cement paste, the basic material. METHODS : To achieve the above purpose, an experiment was conducted by mixing power-type CNT and wrap-type CNT up to cement paste formulation by weight of 0.0wt%~4.1wt% in accordance with "KS L ISO 679(of cement strength test method)", and compressive strength was measured at 28 days of curing. In addition, the volume resistivity of the specimen was measured to test thermal and electrical characteristics, and the rate of temperature changes in specimen surface by power consumption was measured by passing electricity through the cross-sections of the specimen. Meanwhile, the criteria for checking the performance as a road snow-melting system was determined as volume resistivity of $100{\Omega}{\cdot}cm$ or less. RESULTS : A comparative analysis between specimen with 0wt% CNT content in plain status and specimen containing various types of CNTs was carried out. From its results, it was found that compressive strength increased approximately 19%, showing the highest rate when 0.2wt% of wrap-type CNT was contained, but volume resistivity of $100{\Omega}{\cdot}cm$ or less appeared only in specimens containing more than 0.2wt% CNT. In addition, it was observed that the surface temperature increased by $4.62^{\circ}C$ per minute on average in specimens containing 3.2wt% CNT. CONCLUSIONS : In this study, CNT was examined as an underlying material for a road snow-melting system, and the possibility of developing the road now-melting system was reviewed by conducting various experiments using CNT-Cement composites. From the experimental results, the specimens were found to have a superior performance when compared to the existing road snow-melting systems that place the heat transfer medium such as copper on the road. However, satisfactory strength performance were not obtained from the specimen containing CNT(2.0% or more) that functions as a heating element, which leads to the need for reviewing methods to increase the strength by using plasticizer or admixture.

• Korean Journal of Food Science and Technology
• /
• v.27 no.6
• /
• pp.845-851
• /
• 1995

To improve the utilization of pear in its processing, the cloudy and clear juice concentrates were prepared and their rheological properties were investigated in the range of temperatures($5{\sim}60^{\circ}C$) and concentrations($15{\sim}60^{\circ}Brix$). Pear juice concentrates showed flow behavior close to Newtonian fluids. Their flow behavior was also explained by applying Power law model and Herschel-Bulkley model. Flow behavior index did not have good correlation with concentration, but decreased with the increase of temperature, showing pseudoplastic properties. Consistency index increased with the increase of concentration and with the decrease of temperature. The effect of temperature and concentration on the apparent viscosity at 1500 1/s shear rate was examined by applying Arrhenius equation. The activation energy for flow of the cloudy and clear pear juice concentrates increased from $1.5140{\times}10^4\;to\;3.4141{\times}10^4\;J/kg{\cdot}mol$, and from $1.4762{\times}10^4\;to\;3.4963{\times}10^4\;J/kg{\cdot}mol$ with the increase of concentration, respectively. The influence of temperature on the apparent viscosity was more pronounced at higher concentration. And the concentration-dependent constant A decreased from $0.0789\;to\;0.0484^{\circ}Brix^{-1}$, and from $0.0786\;to\;0.0476^{\circ}Brix^1$ with the increase of temperature, respectively.

• Journal of Ginseng Research
• /
• v.5 no.1
• /
• pp.8-23
• /
• 1981

Color is one of the most important quality factors of red ginseng (Hong-sam) which is processed from fresh ginseng (Panax ginseng C. A. Meyer). Therefore, a study of characteristics of browning mixtures of aqueous fresh ginseng extracts, factors which accelerate the browning of the aqueous extracts, and the antioxidant activity of the browning mixtures may contribute to the improvement of the color and other quality of red ginseng and other ginseng products such as ginseng extracts. In the present study, factors which affect the Maillard-type browning reaction of aqueous extracts of fresh ginseng roots were investigated firstly by adding various concentrations (0.001-0.5M) of arginine or glucose solutions, by varying the browning reaction temperatures and durations. Secondly, some characteristics such as brown color intensity, amounts of water-soluble and ether-soluble extracts, amounts of non-dialyzable materials, pH, viscosity, and reactivity with 2,2'- diphenyl -1 - picrylhydrazyl and antioxidant activity of the browning mixtures of the aqueous fresh ginseng extracts with small amounts of 0.1 M arginine, 0.1 M glucose, and distilled water at various browning temperatures and reaction time were studied. The results of the present study are as follows. 1. Color intensity (absorbance at 470 nm) of the browning mixtures was increased by adding various concentrations of arginine solution to the fresh ginseng extract, but the addition of the same amount of glucose solution did not increase the color intensity. 2 The amounts of water- or ether-soluble extracts, amounts of non-dialyzable materials were slightly greater in case of the browning mixtures of the fresh ginseng extract with 0.1M arginine solution than in case of the browning mixtures of the fresh ginseng extract with the same amount of 0.1 M glucose solution. In the process of the browning reaction, the pH of the browning mixtures of the fresh ginseng extract with 0.1 M arginine solution decreased slightly, while that of the browning mixtures with 0. 1 M glucose solution was almost constant. 3. The color intensity (absorbance at 470 nm) of the browning mixtures of the fresh ginseng extract with 0.1 M arginine or 0.1 M glucose solutions did not correlate well with the reducing power or the antioxidant power of the browning mixtures. The antioxidant activity of 90% ethanol extracts from the earlier stages of the browning mixtures of the fresh ginseng extract with the arginine solution was almost comparable to that of the 90% ethanol extracts from the later stages of the corresponding browning mixtures. The browning mixtures of only the fresh ginseng extract or of the fresh ginseng extract with the glucose solution showed considerable antioxidant activity, although both showed less brown color intensity than the fresh ginseng extract with he arginine solution.

• International Journal of Automotive Technology
• /
• v.6 no.3
• /
• pp.221-227
• /
• 2005

Aim of this study is to investigate an aerodynamic effect of a drag-reducing device on a heavy-duty truck. The vehicle experiences two different kinds of aerodynamic forces such as drag and uplifting force (or downward force) as it is traveling straight forward at constant speed. The drag force on a vehicle may cause an increase of the rate of fuel consumption and driving instability. The rolling resistance of the vehicle may be increased as result of the negative uplifting or downward force on the vehicle. A device named roof-fairing system has been applied to examine the reduction of aerodynamic drag force on a heavy-duty truck. As for a engineering design information, the drag-reducing system should be studied theoretically and experimentally for the best efficiency of the device. Four different types of roof-fairing model were considered in this study to investigate the aerodynamic effect on a model truck. The drag and downward force generated by vehicle has been obtained from numerical calculation conducted in this study. The forces produced on four fairing models considered in this study has been compared each other to evaluate the best fairing model in terms of aerodynamic performance. The result shows that the roof-fairing mounted truck has bigger negative uplifting or downward force than that of non-mounted truck in all speed ranges, and drag force on roof-fairing mounted truck has smaller than that of non-mounted truck. The drag coefficient $(C_D)$ of the roof-fairing mounted truck (Model-3) is reduced up to $41.3\%$ than that of non-mounted trucks (Model-1). A downward force generated by a roof-fairing mounted on a truck is linearly proportional to the rolling resistance force. Therefore, the negative lifting force on a heavy-duty truck is another important factor in aerodynamic design parameter and should be considered in the design of a drag-reducing device of a tractor-trailer. According to the numerical result obtained from present study, the drag force produced by the model-3 has the smallest of all in all speed ranges and has reasonable downward force. The smaller drag force on model-3 with 2/3h in height may results of smallest thickness of boundary layer generated on the topside of the container and the lowest intensity of turbulent kinetic energy occurs at the rear side of the container.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.1
• /
• pp.13-22
• /
• 2001

This paper presents three dimensional structure of RF packages and the improvement effect of its electrical characteristics when implementing RF transceivers. We divided RF modules into several subunits following each subunit function based on the partitioning algorithm which suggests a method of three dimension stacking interconnection, PAA(pad area array) interconnection and stacking of three dimensional RF package structures. 224MHz ITS(Intelligent Transportation System) RF module subdivided into subunits of functional blocks of a receiver(RX), a transmitter(TX), a phase locked loop(PLL) and power(PWR) unit, simultaneously meeting the requirements of impedance characteristic and system stability. Each sub­functional unit has its own frequency region of 224MHz, 21.4MHz, and 450KHz~DC. The signal gain of receiver and transmitter unit showed 18.9㏈, 23.9㏈. PLL and PWR modules also provided stable phase locking, constant voltages which agree with design specifications and maximize their characteristics. The RF module of three dimension stacking structure showed $48cm^3$, 76.9％ reduction in volume and 4.8cm, 28.4％ in net length, 41.8$^{\circ}C$, 37% in maximum operating temperature, respectively. We have found that three dimensional PAA package structure is able to produce high speed, high density, low power characteristics and to improve its functional characteristics by subdividing RF modules according to the subunit function and the operating frequency, and the features of physical volume, electrical characteristics, and thermal conditions compared to two dimensional RF circuit modules.

• Plant Journal
• /
• v.15 no.3
• /
• pp.29-34
• /
• 2019

In the study, the effect of steam injection on syngas productivity was investigated under the constant operating conditions of gasifier oxygen load while the coal feed was fixed and the steam injection flow rate is changed in Taean IGCC plant. The maximum syngas average productivity was found to be at 80 % and 90 % of gasifier oxygen loads with the steam injection flow rate of 0.14 kg/s and 0.15 kg/s per coal burner. Through this study, the syngas productivity was changed by adjusting the steam injection amount and as the steam injection flow rate increased, the syngas productivity increased and then decreased again. The syngas productivity can be increased only by steam injection without supplying additional coal and it is considered that the syngas productivity has different characteristics depending on coal type. Thus it is recommended to operate the gasifier using Carbo-One coal with the steam injection flow rate of about 0.14 kg/s per coal burner when the gasifier oxygen load is 80 % ~ 90 %.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.3
• /
• pp.102-110
• /
• 2005

Piezoelectric transformers(PT) are expected to be small, thin and highly efficient, and which are attractive as a transformer with high power density for step down voltage. For these reasons, we have attempted to develop a step-down PT for the miniaturized adaptor. We propose a PT, operating in thickness extensional vibration mode for step-down voltage. This PT consists of a multi-layered construction in the thickness direction. In order to develop the step-down PT of 10 W class and turn ratio of 0.1 with high efficiency and miniaturization, the piezoelectric ceramics and PT designs are estimated with a variety of characteristics. The basic composition of piezoelectric ceramics consists of ternary yPb(Zr$_{x}$Ti$_{1-x}$)O$_{3}$-(1-y)Pb(Mn$_{1/3}$Nb1$_{1/3}$Sb$_{1/3}$)O$_{3}$. In the piezoelectric characteristics evaluations, at y=0.95 and x=0.505, the electromechanical coupling factor(K$_{p}$) is 58$\%$, piezoelectric strain constant(d$_{33}$) is 270 pC/N, mechanical quality factor(Qr$_{m}$) is 1520, permittivity($\varepsilon$/ 0) is 1500, and Curie temperature is 350 $^{\circ}C$. At y = 0.90 and x = 0.500, kp is 56$\%$, d33 is 250 pC/N, Q$_{m}$ is 1820, $\varepsilon$$_{33}$$^{T}$/$\varepsilon$$_{0}$ is 1120, and Curie temperature is 290 $^{\circ}C$. It shows the excellent properties at morphotropic phase boundary regions. PZT-PMNS ceramic may be available for high power piezoelectric devices such as PTs. The design of step-down PTs for adaptor proposes a multi-layer structure to overcome some structural defects of conventional PTs. In order to design PTs and analyze their performances, the finite element analysis and equivalent circuit analysis method are applied. The maximum peak of gain G as a first mode for thickness extensional vibration occurs near 0.85 MHz at load resistance of 10 .The peak of second mode at 1.7 MHz is 0.12 and the efficiency is 92$\%$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.3169-3175
• /
• 2011

This paper describes the design of size-reduced directional coupler using the artificial dielectric substrate and its increased effective permittivity. Directional couplers are widely used in measuring RF power indirectly and coupling signal power. Artificial dielectric substrates have higher effective dielectric constant than standard dielectric substrate due to the lots of metalized via-holes, and the increased effective permittivity results in size-reduction of circuits. As a design example, 15dB directional couplers are designed on the standard substrate and artificial dielectric substrate and their size are compared. The size of the directional coupler using the artificial dielectric substrate is only 1/3 of that designed using the standard substrate, while the performances are preserved. In addition, the measured performances of the size-reduced coupler are well agreed with the simulated ones. The measured coupling coefficient, matching, and insertion loss at 2GHz are -14.62dB, -24.1dB, and -0.38dB, respectively.

• Journal of the Korean Institute of Navigation
• /
• v.20 no.4
• /
• pp.81-98
• /
• 1996

The purpose of this study was analysis of the muscle action in physical exercise in the rolling machine. The rolling machine moved by eletric power-driven was made to keep the constant cycle and size of rolling. The subjects of this study consist of 4 seaman(SM) and 4 landman (LM). The experiment analyzed the muscle power of lower and upper limbs by Intergrated Electromyogram(IEMG). The measurement was made on the ground, and 6 and 8 degrees of rolling separately. This study concludes as follows ; including analysis of IEMG of heavy exercise in two hands curl, a standstill walking and just standing. 1. IEMG of the lower limbs when standing. 1) In 6 degrees of rolling, for the landman(LM), vastus medialis m.(9.73), vastus lateralis m.(9.55), and rectus femores m.(8.73) acted more. As for the seaman(SM), tibialis anterior m.(5.38), biceps femores m.(5.05), and gastrocnemius m.(4.47) acted more. 2) In 8 degrees of rolling, in common, for both LM and SM, it were vastus medialis m.(11.20 and 8.97), vastus lateralis m.(16.20 and 4.63), and tibialis anterior m.(5.13 and 4.47). 3) It was showed that IEMG of LM was larger than that of SM. 2. IEMG of the lower limbs when walking. 1) On the ground, for the LM, gastrocnemius m.(7.08), vastus medialis m.(6.65), and vastus latralis m.(6.60) acted more. As for the SM, vastus lateralis m.(7.08), vastus medialis m.(6.58) and restus femores m.(5.10) acted more. 2) In both 8 and 6 degrees of rolling, vastus medials m.(14.50 and 11.98), vastus lateralis m.(10.10 and 14.10), and gastrocnemius m.(11.75 and 7.10) acted more in two groups. 3) It was showed that IEMG of LM was larger than that of SM. 3. IEMG of the lower limbs when heavy exercise(two hands curl). 1) On the ground, for the LM, vastus lateralis m.(21.68), vastus medialis m.(16.08), and rectus femores m.(14.08) acted more. As for the SM, tibialis anterior m.(16.08), vastus medialis m.(14.58), and vastus lateralis m.(8.78) acted more. 2) In 8 and 6 dgrees of rolling, it were vastus medialis m.(17.05 and 12.45), vastus lateralis m.(37.98 and 17.08), and tibialis anterior m.(19.83 and 13.20). 3) It was showed that IEMG of LM was larger than that of SM. 4. IEMG of the upper limbs when heavy exercise. 1) On the ground, the brachialis m.(44.30 and 17.80), and biceps brachii m.(13.40 and 25.10) acted more in two groups. 2) In both 6 and 8 degrees of rolling, the brachialis m.(37.60 and 24.35), and biceps brachii m.(11.38 and 7.97) acted more in two groups. 3) It was showed that IEMG of SM was larger than that of LM.