• Journal of the East Asian Society of Dietary Life
• /
• 제26권4호
• /
• pp.359-369
• /
• 2016

In this study Ragwort, which had various and excellent pharmacological activity, was selected as a functional material, and intended to present an optimum condition of Ragwort Injeolmi by the blanching method, commonly used in the field. The general components, antioxidation, and dietary fiber of Ragwort were analyzed, and produceableness of Ragwort added Injeolmi was reviewed through instrumental inspection and sensory evaluation of various adding ratio of lyophilized Ragwort power and Ragwort pre-processed by blanching. It was proved that the SOD-likely active of Ragwort was 45.69%, total poly- phenol content was 12.45 mg, and total flavonoid content was 10.25 mg. The pH of Injeolmi adding Ragwort powder showed an increasing trend in the order of 0%, 1%, 3%, 5%, while that of Injeolmi adding blanching Ragwort showed increasing trend in the order of 0%, 10%, 15%, 20%, and there were significant difference (p<0.001). The soluble solid content of all sample groups showed constant value, and it was understood that no sugar was added in the process. From chromatography measurement result, a-value (redness) of 1% sample group was the lowest, and there were significant differences among sample groups (p<0.001). During 3 days of storage period, total microbial count of Injeolmi showed increasing trend while the storage period was getting longer. From the acceptability test Injeolmi adding blanching Ragwort had shown generally higher value.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• 제49권7호
• /
• pp.30-38
• /
• 2012

This paper presents packet detection, frequency offset estimation architecture and performance analysis for OFDM-based wireless personal area network (WPAN) systems. Packet detection structure is used to find the start point of a packet exactly in WPAN system as the correlation value passes the constant threshold value. The applied autocorrelation structure of the algorithm can be implemented simply compared to conventional packet detection algorithms. The proposed frequency offset estimation architecture is designed for phase rotation process structure, internal bit reduction to reduce hardware size and the frequency offset adjustment block to reduce look-up table size unlike the conventional structure. If the received signal can be compensated by estimated frequency offset through the correction block, it can reduce the impact on the frequency offset. Through the performance result, the proposed structure has lower hardware complexity and gate count compared to the conventional structure. Thus, the proposed structure for OFDM-based WPAN systems can be applied to the initial synchronization process and high-speed low-power WPAN chips.

• Journal of the Korea Concrete Institute
• /
• 제13권3호
• /
• pp.294-300
• /
• 2001

The effectiveness of bottom ash on the mechanical and physical properties of Controlled Low-Strength Material(CLSM) is investigated in this study, CLSM is defined by the ACI Committee 229 as a cementitious material that is in a flowable state at the time of placement and having a specified compressive strength of 83 kgf/$\textrm{cm}^2$ or less at the age of 28 days. This study was undertaken on the use of bottom ash as a fine aggregate in CLSM. Four different levels of bottom ash with fly ash contents, 25%, 50 %, 75%, 100%, are investigated. Laboratory test results conclude that inclusion of bottom ash increases the demand for mixing water in obtaining the required flow. However, the sand was reduced because it was adjusted to maintain a constant total volume. Miかe proportions were developed for producing CLSM at three 28-day strength levels: removal with tools (less than 7 kgf/$\textrm{cm}^2$), mechanical means (less than 20 kgf/$\textrm{cm}^2$), and power equipment (less than 83 kgf/cm\`). The physical and mechanical properties supports the concept that by-product bottom ash can be successfully used in CLSM.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제11권1호
• /
• pp.116-123
• /
• 2000

This paper presents a linearizer using the feedforward loop which can be applied to PCS base-station applications. This linearizer used a IM amplifier and an auxiliary amplifier in order to remove delay lines used in the predistortor using the feedforward technique. The delay line in error loop is changed by the main power amplifier(PA) and the error amplifier is utilized to amplify the error signal which fed to the output of main amplifier. The linearizer was simulated by HP ADS ver 1.1 and fabricated on GML 1000 with thickness of 0.8 mm and dielectric constant of 3.2. Two-tone signals at 1.85 GHz and 1.851 GHz with -7dBm/tone from synthesizers are injected into the main PA. The main PA with a 27 dB gain and a $P_{1dB}$ of 29 dBm(two-tone) was utilized. The reduction of intermodulation distortion (IMD) is around 17 dB.

• Journal of Ocean Engineering and Technology
• /
• 제29권2호
• /
• pp.169-174
• /
• 2015

This paper addresses experimental methodologies to measure the temperature-dependent thermal conductivity of the insulation materials popularly used for LNG cargo containment systems. The measurement techniques considered in this paper are the guarded hot plate (GHP) method and heat flow method (HFM). The former is based on the power supplied to the hot plate to keep the temperature constant, and the latter is based on a direct heat flux measurement. In order to improve the accuracy of the HFM, the thermal conductivity obtained by GHP was cross-compared with the HFM results, and a calibration factor was derived. It was found that the thermal conductivities measured by the two methods corresponded well under room temperature, but the deviation tended to slightly increase as the temperature decreased. Because of the easy installation and operability of HFM, it can be used to measure thermal conductivity in a large scale mock-up test or unit insulation panel test, where the GHP method is difficult to apply.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• 제22권1호
• /
• pp.40-49
• /
• 2008

Interior permanent magnet synchronous motor(IPMSM) has become a popular choice in electric vehicle applications and so of due to their excellent power to weight ratio. To obtain maximum efficiency in these applications, this paper proposes the neural network control method. The controllable electrical loss which consists of the copper loss and the iron loss can be minimized by the error back propagation algorithm(EBPA) of neural network. The minimization of loss is possible to realize eHciency optimization control for the IPMSM drive. This paper proposes high performance and robust control through a real time calculation of parameter variation such as variation of back emf constant, armature resistance and d-axis inductance about the motor operation. Proposed algorithm is applied IPMSM drive system, prove validity through analysis operating characteristics con011ed by efficiency optimization control.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.18-19
• /
• 2006

In this study, dielectric properties of the ${Mg_5}{B_4}{O_{15}}$ (B=Ta, Nb) cation-deficient perovskite ceramics and its oscillator application are investigated. The cation-deficient perovskite ceramics are prepared through the solid-state route. According to the XRD pattern, ${Mg_4}{Ta_2}{O_9}$ and $Mg{Ta_2}{O_6}$ phase existed in calcined and sintered ${Mg_5}{Ta_4}{O_15}$ powder. Also ${Mg_5}{Ta_4}{O_{15}}$ phase added with increasing sintering temperature. In the case of calcined and sintered ${Mg_5}{Nb_4}{O_{15}}$ powder, single phase of ${Mg_5}{Nb_4}{O_{15}}$ is appeared. In the case of the ${Mg_5}{Ta_4}{O_{15}}$ and ${Mg_5}{Nb_4}{O_{15}}$ ceramics sintered at $1450^{\circ}C$ for 5h, the dielectric constant, quality factor, and temperature coefficient of the resonant frequency (TCRF) were 8.2, 259,473 GHz, $-10.91ppm/^{\circ}C$ and 14, 37,350 GHz, $-52.3\;ppm/^{\circ}C$, respectively. Simulated DR with ${Mg_5}{Ta_4}{O_{15}}$ ceramics had the operating frequency of 10.99 GHz and S(2,1) of -29.795 dB. Size of manufactured oscillator was $56{\times}48{\times}34\;mm^3 and operated at 11.93 GHz. Power output and second harmonic of oscillator were +13.61 dBm and -23.81 dBc at 23.85 GHz, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제28권2A호
• /
• pp.70-79
• /
• 2003

A theoretical presentation of evanescent coupling is offered with respect to the refractive indexes between a side polished optical fiber and an infinitely planar waveguide with a conductor cladding(PWGCC). The PWG is suspended at a constant distance from an unclad fiber core and attached with the perfect conductor(PEC) on one side. The behavior of the distributed coupler is examined using a coupled mode model, which takes account of the two dimensions of the waveguide configuration. The coupling and propagation of light were found to depend on both the relationship between the refractive index values of each structure and the configuration of the side polished fiber used in the PWGCC. The spreading of light in the unconfined direction of the PWGCC is described in terms of a simple geometrical interpretation of the synchromization condition that is in agreement with a previous investigation of the problem based on the coupled-mode theory(CMT). The power of the light propagation in the fiber decreased exponentially along the fiber axis as it was transferred to the PWGCC.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• 제2권1호
• /
• pp.37-48
• /
• 1990

The drag and heat transfer reduction phenomena and degradation effects of drag reducing polymer solutions which are known as the viscoelastic fluids are investigated experimentally for the turbulent circular tube flows. Two stainless steel tubes are used for the experimental flow loops. Aqueous solutions of Polyacrylamide Separan AP-273 with concentrations from 300 to 1000 wppm are used as working fluids. Flow loops are set up to measure the friction factors and heat transfer coefficients of test tubes in the once-through system and the recirculating flow system. Test tubes are heated by power supply directly to apply constant heat flux boundary conditions on the wall. Capillary tube viscometer and falling ball viscometer are used to measure the viscous characteristics of fluids and the characteristic relaxation time of a fluid is determined by the Powell-Eyring model. The order of magnidude of the thermal entrance length of a drag reducing polymer solution is close to the order of magnitude of the laminar entrance length of Newtonian fluids. Dimensionless heat transfer coefficients of the viscoelastic non-Newtonian fluids may be represented as a function of flow behavior index n and newly defined viscoelastic Graetz number. As degradation continues viscosity and the characteristic relaxation time of the testing fluids decrease and heat transfer coefficients increase. The characteristic relaxation time is used to define the Weissenberg number and variations of friction factors and heat transfer coefficients due to degradation are presented in terms of the Weissenberg number.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• 제45권9호
• /
• pp.55-59
• /
• 2008

In this paper, the linearity of Doherty amplifier has been improved by applying a compact slow-wave microstrip branch-line coupler on the output of Doherty amplifier. The proposed branch coupler has four microstrip high-low impedance resonant cells periodically placed inside the branch-line coupler to result in high slow-wave effect. The new coupler not only effectively reduces the occupied area to 30% of the conventional branch-line coupler at 1.8GHz, but also has high second harmonic suppression performance. We obtained the 3rd-order intermodulation distortion ($IMD_3$) of -31.16 dBc for CDMA applications with that of maintaining the constant power added efficiency (PAE). The IMD3 performance is improved as much as -7 dBc compared with a Doherty amplifier.