• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.6
• /
• pp.1075-1082
• /
• 2017

This paper describes a design of hash processor which can execute new hash algorithm, SHA-3 and extendable-output function (XOF), SHAKE-256. The processor that consists of padder block, round-core block and output block maximizes its performance by using the block-level pipelining scheme. The padder block formats the variable-length input data into multiple blocks and then round block generates SHA-3 message digest or SHAKE256 result for multiple blocks using on-the-fly round constant generator. The output block finally transfers the result to host processor. The hash processor that is implemented with Xilinx Virtex-5 FPGA can operate up to 220-MHz clock frequency. The estimated maximum throughput is 5.28 Gbps(giga bits per second) for SHA3-512. Because the processor supports both SHA-3 hash algorithm and SHAKE256 algorithm, it can be applicable to cryptographic areas such as data integrity, key generation and random number generation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.4
• /
• pp.166-176
• /
• 2010

The output characteristics of photovoltaic(PV) arrays are nonlinear and are affected by the temperature and solar insolation of cells. Maximum power point tracking(MPPT) methods are used to maximize PV array output power by tracking maximum power point(MPP) continuously. To increase the output efficiency of PV system, it is important to have more efficient MPPT. This paper proposes a novel maximum power point tracking(MPPT) control algorithm considering insolation to improve efficiency of PV system. The proposed algorithm is composed perturb and observe(P&O) method and constant voltage(CV) method. The proposed method is simulated under varying operating conditions. The effectiveness of these different MPPT methods is investigated thoroughly by PSIM simulation. The simulation results show that this proposed method provides better performance than conventional methods at a variable insolation without self-excited vibration of the power. By the simulation results, the validity of the proposed HB method is proved.

• Journal of the Korean Magnetics Society
• /
• v.7 no.6
• /
• pp.314-320
• /
• 1997

We have observed the orientation behavior of acicular iron oxides in magnetic layer of the particular magnetic tape after magnetic paint was coated on polyester film. As results of the static orientation, orientation of iron oxides come to the maximum at the front and the back of orientation magnets, but it was a litter lower at the back than at the front, and it slowly decreases and come to the constant level after passing through the orientation magnets. In case of edge portion to be futher away from center in the coated film, the orientation of iron oxides in magnetic layer come to worse than that of the center. We think it is owing to the shape and the magnetic magnitude of orientation magnets. The results of the dynamic orientation are as follows. As the orientation of iron oxides in the particulated magnetic tape is higher, the output properties of tape come to better than ever. And the orientation of iron oxides can be changed by drying condition, as result, the output properties of tape can be also. Therefore we think the considrations of the design of orientation magnets and the control of drying condition are needed to improve output properties of the particulated magnetic tape.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.115-120
• /
• 2016

This paper deals with AM-SMMA (Adaptive Modulus-SMMA) adaptive equalization algorithm that is possible to improves the equalization performance using adaptive modulus which is propotional to the output signal power of equalizer in the current SMMA algorithm. The fixed statistic modulus of transmitted QAM signal is used in current SMMA algorithm in order to generate the error signal for updating the tap coefficient of equalizer. The adaptive modulus which is propotion to the equalizer output signal power is used in the proposed AM-SMMA. The computer simulation was performed in order to confirm the improved equalization performance of proposed algorithm. The performance index includes the output signal constellation, the residual isi and maximum distortion that is for the convergence characteristics, the SER. As a result of computer simulation, the residual isi, maximum distortion are better in the small weighting values. But in SER performance is better in the large weighting values.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.10
• /
• pp.133-137
• /
• 2016

Use of UV gel for nail management have been increasing gradually. In order to develop an UV lamp necessary to UV gel, in this study, we was designed circuits of the UV-LED lamp. Power supply part that supplies constant power to the several UV-LEDs, was designed the circuit with the method of DC-DC converter. Taking into account the direction of the thumb nail and the position of the little finger nail, it was placed UV-LEDs. Input power of the power supply part was used as a battery voltage of 3.8[V]. The output voltage of the power supply part was appeared in approximately 3.1[V]. And in order to examine the state of change of the output voltage according to the amount of current consumption of UV-LEDs, after inserting of load resister, the output voltage was more than about 3.0[V] in the simulation results of the power supply part while changing the resistance value.

• Journal of Power Electronics
• /
• v.16 no.2
• /
• pp.464-472
• /
• 2016

This study applies the selective harmonic elimination (SHE) technique to design and operate a regulated AC/DC/AC power supply suitable for maritime military applications and underground trains. The input is a single 50/60 Hz AC voltage, and the output is a 400 Hz regulated voltage. The switching angles for a multi-level inverter and transformer turns ratio are determined to operate with special connected transformers with equal power ratings and produce an almost sinusoidal current. As a result of its capability of directly controlling harmonics, the SHE technique is applicable to apparatus with congenital immunity to specific harmonics, such as series-connected transformers, which are specially designed to equally share the total load power. In the present work, a single-phase 50/60 Hz input source is rectified via a semi-controlled bridge rectifier to control DC voltage levels and thereby regulate the output load voltage at a constant level. The DC-rectified voltage then supplies six single-phase quazi-square H-bridge inverters, each of which supplies the primary of a single-phase transformer. The secondaries of the six transformers are connected in series. Through off-line calculation, the switching angles of the six inverters and the turns ratios of the six transformers are designed to ensure equal power distribution for the transformers. The SHE technique is also employed to eliminate the higher-order harmonics of the output voltage. A digital implementation is carried out to determine the switching angles. Theoretical results are demonstrated, and a scaled-down experimental 600 VA prototype is built to verify the validity of the proposed system.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.1
• /
• pp.80-87
• /
• 2010

The method of function synthesis is essential when we control the systems not known their characteristic, by predicting the function to satisfy a relation between input and output from the given pairs of input-output data. In general the most systems operate non-linearly, it is easy to come about problem is composed with combinations of parameter, constant, condition, and so on. Genetic programming is proposed by one of function synthesis methods. This is a search method of function tree to satisfy a relation between input and output, with appling genetic operation to function tree to convert function into tree structure. In this paper, we indicate problems of a function synthesis method by an existing genetic programming propose four type of new improved method. In other words, there are control of function tree growth, selection of local search method for early convergence, effective elimination of redundancy in function tree, and utilization of problem characteristic of object, for preventing function from complicating when the function tree is searched. In case of this improved method, we confirmed to obtain superior structure to function synthesis method by an existing genetic programming in a short period of time by means of computer simulation for the two-spirals problem.

• Korean Journal of Optics and Photonics
• /
• v.27 no.2
• /
• pp.73-80
• /
• 2016

In this paper, we report the results of a study on the design and fabrication of a light-guiding plate (LGP) using a hybrid light-emitting diode (LED) and sunlight source that can be applied to a photobioreactor. LGP patterns for the LED source were designed and engraved on an LGP, together with previously reported patterns for a sunlight source. A control system for the hybrid LGP was designed to maintain the output photon flux density (PFD) from the LGP at a constant value. When the target value of the output PFD was set to $70{\mu}E/(m^2{\cdot}s)$, the error range of the output PFD was found to be within ${\pm}2%$.

• Korean Journal of Optics and Photonics
• /
• v.19 no.3
• /
• pp.175-181
• /
• 2008

We develop a fiber optic acceleration sensor with LED, PD, POF, and a cantilever beam, having film grating at the edge of the beam. Light is transmitted from LED to PD through the film grating. When the cantilever beam moves by external vibration, output light is modulated as sinusoidal signals. The characteristics of output signals are dominated by the spacing of the film grating and also by the size and the elasticity of the beam. Two output signals, having constant initial phase difference, are obtained by two gratings with 90 degree phase difference. Those two signals are used to determine phase angle, which is proportional to the displacement of the beam. Finally, the acceleration is determined from conversion equation between displacement and acceleration. This sensor is designed for monitoring the vibration of large and complex building in the low frequency range of below 7 Hz, and is particularly suitable to measure acceleration in electromagnetic environments.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.1 s.45
• /
• pp.155-160
• /
• 2007

Because output of multi-code CDMA system adapted high speed data transmission becoming multi-level system use linear amplifier in output stage and complex output signal. Therefore, Multi-Code CDMA system has shortcoming of high price, high complexity etc.. Binary CDMA technology that allow fetters in existing CDMA technology to supplement this shortcoming proposed. In binary CDMA system When correlator process high speed data, bottle-neck phenomenon is happened on synchronization acquisition process, it is very important parameter. Because existent correlator must there be advantage that power consumption is small but flow addition of several stages to receive correlation's value, the processing speed has disadvantage because the operation amount is much. Therefore in this paper, proposed correlator has characteristic such as data is able to high speed processing, chip area is independent and power consumption is constant in structure in binary CDMA system.