• Pediatric Infection and Vaccine
• /
• v.26 no.1
• /
• pp.42-50
• /
• 2019

Purpose: We investigated the clinical features and epidemiology of staphylococcal scalded skin syndrome (SSSS) from year 2006 to 2015 in Changwon city, Korea. Methods: We reviewed medical records of 69 patients diagnosed with SSSS from year 2006 to 2015. Antibiotic susceptibility testing was performed by agar dilution method. Methicillinresistant Staphylococcus aureus (MRSA) was phenotypically identified by oxacillin susceptibility testing and genotypically confirmed by the existence of the mecA gene. Results: The median age of patients was 2.0 years (range 0.2-6 years). Three (4.3%), 53 (76.8%), and 13 (18.9%) patients showed the generalized type, the intermediate type, and the abortive type, respectively. Patients occurred throughout the year, but most patients occurred between July and October. MRSA was isolated from 54 of the 60 patients regardless of the clinical types. All patients recovered without any complications. Conclusions: There was a constant occurrence of SSSS patients caused by MRSA in Changwon area during 2006 and 2015. It is needed to constantly monitor the occurrence of patients with SSSS.

• Journal of Wetlands Research
• /
• v.23 no.2
• /
• pp.122-132
• /
• 2021

We reviewed the methods employed in Korean tidal flat surveys to measure the local abundance of the endangered wildlife and marine protected species, the fiddler crab, Austruca lactea. A complete census for infinite population is impossible even in a limited habitat within a tidal flat, and density estimates from samples strongly vary due to diverse biological and ecological factors. The habitat boundaries and areas shift with periodicities or rhythmic activities of organisms as well as measurement errors. Hence the local abundance calculated from density and habitat areas should be regarded as transient. This conjecture was valid based on the spatio-temporal variations of the density averages, standard error ranges, and spatial distribution of the crab, A. lactea observed for 3 years (2015-2017) in Songdo tidal flat in Incheon. We proposed the potential habitat areas using the occurrence probability of 50% from logistic regression model, reflecting the importance of habitat conservation value as an alternative to local abundance. The spatial shape of potential habitat predicted from a generalized model would remain constant over time unless the species' critical environmental conditions change rapidly. The species-specific model is expected to be used for the introduction of desired species in future habitat restoration/creation projects.

• Tunnel and Underground Space
• /
• v.31 no.6
• /
• pp.610-622
• /
• 2021

The DECOVALEX project is one of the representative international cooperative projects to enhance the understanding of the complex Thermo-Hydro-Mechanical-Chemical(THMC) coupled behavior in the high-level radioactive waste disposal system based on the numerical simulation. DECOVALEX-2023 is the current phase consisting of 7 tasks, and Task C aims to model the THM coupled behavior in the disposal system based on the Full-scale Emplacement (FE) experiment at the Mont-Terri underground rock laboratory. This study performs the numerical simulation based on the OGS-FLAC developed for the current study. In the numerical model, we emplaced the heater with constant power horizontally based on the FE experiment and monitored the pressure development, temperature increase, and mechanical deformation at the specific monitoring points. We monitored the capillary pressure as the primary effect inducing the flow in the buffer system, and thermal stress and pressurization were dominant in the surrounding rocks' area. The results will also be compared and validated with the other participating groups and the experimental data further.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_1
• /
• pp.1231-1244
• /
• 2022

The frequency of exposure of field crops to stress situations is increasing due to abnormal weather conditions. In South Korea, large-scale diseases in representative paddy rice cultivation area were happened. There are limits to field investigation on the crop damage due to large-scale. Satellite-based remote sensing techniques are useful for monitoring crops in cities and counties, but the sensitivity of vegetation index measured from satellite under abnormal growth of crop should be evaluated. The goal is to evaluate satellite-based normalized difference vegetation index (NDVI) retrieved from different spatial scales using drone imagery. In this study, Sentinel-2 and Landsat-8 satellites were used and they have spatial resolution of 10 and 30 m. Drone-based NDVI, which was resampled to the scale of satellite data, had correlation of 0.867-0.940 with Sentinel-2 NDVI and of 0.813-0.934 with Landsat-8 NDVI. When the effects of bias were minimized, Sentinel-2 NDVI had a normalized root mean square error of 0.2 to 2.8% less than that of the drone NDVI compared to Landsat-8 NDVI. In addition, Sentinel-2 NDVI had the constant error values regardless of diseases damage. On the other hand, Landsat-8 NDVI had different error values depending on degree of diseases. Considering the large error at the boundary of agricultural field, high spatial resolution data is more effective in monitoring crops.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.6
• /
• pp.393-399
• /
• 2021

In this study, experiments were conducted to estimate the PM concentrations by learning the nighttime CCTV images of various PM concentrations environments. In the case of daytime images, there have been many related studies, and the various texture and brightness information of images is well expressed, so the information affecting learning is clear. However, nighttime images contain less information than daytime images, and studies using only nighttime images are rare. Therefore, we conducted an experiment combining nighttime images with non-uniform characteristics due to light sources such as vehicles and streetlights and building roofs, building walls, and streetlights with relatively constant light sources as an ROI (Region of Interest). After that, the correlation was analyzed compared to the daytime experiment to see if deep learning-based PM concentrations estimation was possible with nighttime images. As a result of the experiment, the result of roof ROI learning was the highest, and the combined learning model with the entire image showed more improved results. Overall, R² exceeded 0.9, indicating that PM estimation is possible from nighttime CCTV images, and it was calculated that additional combined learning of weather data did not significantly affect the experimental results.

• Journal of Korea Water Resources Association
• /
• v.55 no.10
• /
• pp.835-841
• /
• 2022

The water level of the dam reservoir is an important data in the operation of the dam. reservoir storage can be calculated by using water levels or prepared for disasters such as drought and floods. However, the water level is measured near the dam, making it difficult to represent a reservoir with a large area, and there is a high possibility that the water surface will be distorted due to discharge. Furthermore, the results of the survey showed that the water level of the reservoir is irregular rather than constant, and the water level of the reservoir is repeatedly falling and rising by section. In order to calculate such a complex and irregular representative water level, the water level observation density of the reservoir must be increased. In this study, we tried to derive the optimum water level observation density for Hwacheon Dam. A reasonable water level measurement density was derived by investigating the water level elevation of the reservoir and statistically analyzing it. The observation density may vary depending on the size of the reservoir, so the same analysis was conducted on the Goesan Dam and Boseonggang Dam. According to the results, four Hwacheon dams, three Goesan dams, and seven Boseong River dams are needed for observation density.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.4
• /
• pp.321-330
• /
• 2022

This study attempted to establish an optimal multi-compound simultaneous analysis method that can secure reliable results for 15 - preservatives, 2 - sun screens and 1 - antioxidants of cosmetics using HPLC-PDA. Since the potential of hydrogen (pH) in the mobile phase affects the acid dissociation constant (pKa) of the preservatives, and the peak retention time shift and area change were observed. The peak separation condition was established by adjusting the pH to 0.1% H₃PO₄ addition (mL) when preparing the mobile phase. As a results of method validation, the linearity correlation coefficient (R²) of above 0.999 were obtained, and accuracy 87.9 ~ 101.1%, 0.1 ~ 7.6% precision for two types of cosmetics (cream and shampoo). It was found that the limit of detection (LOD) was 0.1 ~ 0.2 mg/kg and the limit of quantitation (LOQ) was 2.0 ~ 4.0 mg/kg. In addition, it was possible to simultaneously separate p-anisic acid, a natural compound that was difficult to separate in HPLC due to the small difference from methylparaben, a synthetic preservatives. Through this study, it will be effectively used to secure quality control and safety for compound that need restrictions on use cosmetics.

• Applied Chemistry for Engineering
• /
• v.33 no.2
• /
• pp.202-209
• /
• 2022

Effects of the support and amount of NiCl₂ on ammonia adsorption capacity were investigated to improve the ammonia adsorption performance. NiCl₂ was impregnated onto the surface of various supports under ultrasonic irradiation. The physicochemical properties and ammonia adsorption performance of NiCl₂-impregnated adsorbents were investigated. Among the various supports, it was found that the adsorption capacity of ammonia was the best when NiCl₂ was impregnated on activated carbon (AC) with the highest specific surface area. As a result of changing the amount of NiCl₂ impregnated on AC, the NiCl₂(2.0)/AC adsorbent impregnated with 2 mmol·g^-1 of NiCl₂ showed the highest ammonia adsorption capacity of 5.977 mmol·g^-1. In addition, the adsorption capacity was found to be maintained at an almost constant level in five repeated cycle tests under the condition that low-temperature heat could be utilized. This indicates that the adsorbent has excellent regeneration ability.

• International Journal of Computer Science & Network Security
• /
• v.22 no.11
• /
• pp.141-148
• /
• 2022

The development of the education system and the labor market today requires new conditions for unification and functioning, the introduction of an innovative culture in the field of Education. The construction of modern management of innovative development of a higher education institution requires consideration of the existing theoretical, methodological and practical planes on which its formation is based. The purpose of the article is to substantiate the modern paradigm of organizing the mechanism of managing the innovative development of higher education institutions. Innovation in education is represented not only by the final product of applying novelty in educational and managerial processes in order to qualitatively improve the subject and objects of management and obtain economic, social, scientific, technical, environmental and other effects, but also by the procedure for their constant updating. The classification of innovations in education is presented. Despite the positive developments in the development of Education, numerous problems remain in this area, which is discussed in the article. The concept of innovative development of higher education institutions is described, which defines the prerequisites, goals, principles, tasks and mechanisms of university development for a long-term period and should be based on the following principles: scientific, flexible, efficient and comprehensive. The role of the motivational component of the mechanism of innovative development of higher education institutions is clarified, which allows at the strategic level to create an innovative culture and motivation of innovative activity of each individual, to make a choice of rational directions for solving problems, at the tactical level - to form motives for innovative activity in the most effective directions, at the operational level - to monitor the formation of a system of motives and incentives, to adjust the directions of motivation. The necessity of the functional component of the mechanism, which consists in determining a set of steps and management decisions aimed at achieving certain goals of innovative development of higher education institutions, is proved. The monitoring component of the mechanism is aimed at developing a special system for collecting, processing, storing and distributing information about the stages of development of higher education institutions, prediction based on the objective data on the dynamics and main trends of its development, and elaboration of recommendations.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.5
• /
• pp.83-91
• /
• 2006

Recently, the intensive rainstorm possibly induced by global warming plays a key role on the instability of railway adjacent slopes. The instability of slopes results as covering and loss of railway lines induced by slided soil mass. According to the site investigation on the failed slopes triggered by rainfall, low types of slope failure were observed: shallow, intermediate, gully erosion, and soil-rock interface failures. The observation reveals the different characteristics of slope failure depending on the thickness of soil layer, morphological features of slope, etc. Based upon the observations, flume tests were conducted to analyze the sliding mechanism of each failure. The variables of flume test are soil layer thickness, rainfall intensity, and morphology of slope under the constant condition of the percentage of fine, initial soil moisture content, slope angle and compaction energy. Test results show that shallow failure was mostly observed from the surface of the slope and caused by the soil erosion; in addition, compared to the other types of failure, the occurrence of initial erosion is late, however, the development of erosion is fast. In gully erosion failure, the collected water from the water catchment area helps erosion of the upper soil layer and transfer of residual corestone, which impedes the erosion process once the upper soil layers are eroded and corestone are exposed. The soil-rock interface failure shows the most fast initial erosion process among the failure types. Interestingly, the common feature observed from the different types of failure was the occurrence of the initial deformation near the toe of slopes which implies the existence of surbsurface flow along the downslope direction.