• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.307-312
• /
• 2017

In this study, the electrochemical performance of surface modified carbon using the PFO (pyrolyzed fuel oil) was investigated by chemical activation with KOH and $K_2CO_3$. PFO was heat treated at $390{\sim}400^{\circ}C$ for 1~3h to prepared the pitch. Three carbon precursors (pitch) prepared by the thermal reaction were 3903 (at $390^{\circ}C$ for 3h), 4001(at $400^{\circ}C$ for 1h) and 4002 (at $400^{\circ}C$ for 2h). Also, the effect of chemical activation catalysts and mixing time on the development of porosity during carbonization was investigated. The prepared carbon was analyzed by BET and FE-SEM. It was shown that chemical activation with KOH could be successfully used to develop carbon with specific surface area ($3.12m^2/g$) and mean pore size (22 nm). The electrochemical characteristics of modified carbon as the anode were investigated by constant current charge/discharge, cyclic voltammetry and electrochemical impedance tests. The coin cell using pitch (4002) modified by KOH has better initial capacity (318 mAh/g) than that of other pitch coin cells. Also, this prepared carbon anode appeared a high initial efficiency of 80% and the retention rate capability of 2C/0.1 C was 92%. It is found that modified carbon anode showed improved cycling and rate capacity performance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.11-11
• /
• 2010

Thin-film-transistors (TFTs) that can be deposited at low temperature have recently attracted lots of applications such as sensors, solar cell and displays, because of the great flexible electronics and transparent. Transparent and flexible transistors are being required that high mobility and large-area uniformity at low temperature [1]. But, unfortunately most of TFT structures are used to be $SiO_2$ as gate dielectric layer. The $SiO_2$ has disadvantaged that it is required to high driving voltage to achieve the same operating efficiency compared with other high-k materials and its thickness is thicker than high-k materials [2]. To solve this problem, we find lots of high-k materials as $HfO_2$, $ZrO_2$, $SiN_x$, $TiO_2$, $Al_2O_3$. Among the High-k materials, $Al_2O_3$ is one of the outstanding materials due to its properties are high dielectric constant ( ~9 ), relatively low leakage current, wide bandgap ( 8.7 eV ) and good device stability. For the realization of flexible displays, all processes should be performed at very low temperatures, but low temperature $Al_2O_3$ grown by sputtering showed deteriorated electrical performance. Further decrease in growth temperature induces a high density of charge traps in the gate oxide/channel. This study investigated the effect of growth temperatures of ALD grown $Al_2O_3$ layers on the TFT device performance. The ALD deposition showed high conformal and defect-free dielectric layers at low temperature compared with other deposition equipments [2]. After ITO was wet-chemically etched with HCl : $HNO_3$ = 3:1, $Al_2O_3$ layer was deposited by ALD at various growth temperatures or lift-off process. Amorphous InGaZnO channel layers were deposited by rf magnetron sputtering at a working pressure of 3 mTorr and $O_2$/Ar (1/29 sccm). The electrodes were formed with electron-beam evaporated Ti (30 nm) and Au (70 nm) bilayer. The TFT devices were heat-treated in a furnace at $300^{\circ}C$ and nitrogen atmosphere for 1 hour by rapid thermal treatment. The electrical properties of the oxide TFTs were measured using semiconductor parameter analyzer (4145B), and LCR meter.

• Journal of Periodontal and Implant Science
• /
• v.46 no.5
• /
• pp.303-319
• /
• 2016

Purpose: The purpose of this animal study was to perform a 3-dimensional micro-computed tomography (micro-CT) analysis in order to investigate the influence of root surface distance to the alveolar bone and the periodontal ligament on periodontal wound healing after a guided tissue regeneration (GTR) procedure. Methods: Three adult Sus scrofa domesticus specimens were used. The study sample included 6 teeth, corresponding to 2 third mandibular incisors from each animal. After coronectomy, a circumferential bone defect was created in each tooth by means of calibrated piezoelectric inserts. The experimental defects had depths of 3 mm, 5 mm, 7 mm, 9 mm, and 11 mm, with a constant width of 2 mm. One tooth with no defect was used as a control. The defects were covered with a bioresorbable membrane and protected with a flap. After 6 months, the animals were euthanised and tissue blocks were harvested and preserved for micro-CT analysis. Results: New alveolar bone was consistently present in all experimental defects. Signs of root resorption were observed in all samples, with the extent of resorption directly correlated to the vertical extent of the defect; the medial third of the root was the most commonly affected area. Signs of ankylosis were recorded in the defects that were 3 mm and 7 mm in depth. Density and other indicators of bone quality decreased with increasing defect depth. Conclusions: After a GTR procedure, the periodontal ligament and the alveolar bone appeared to compete in periodontal wound healing. Moreover, the observed decrease in bone quality indicators suggests that intrabony defects beyond a critical size cannot be regenerated. This finding may be relevant for the clinical application of periodontal regeneration, since it implies that GTR has a dimensional limit.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.314-317
• /
• 2002

The purpose of this study was to evaluate the clinical application of Patlak tool on GE PET workstation for quantitative analysis of dynamic PET images in cardiac patients. Three patients including coronary artery disease (CAD), myocardial infarction (MI), and angina were studied. All subjects underwent dynamic cardiac PET scan using a GE Advance scanner. After 10 min transmission scan for attenuation correction using two rotating $\^$68/Ge rod sources, three patients with cardiac disease were performed dynamic cardiac PET scan after the administration of approximately 370 MBq of FDG. The dynamic scan consisted of 36 frames with variable frame length (12${\times}$10s, 6${\times}$20s, 6${\times}$60s, 12${\times}$300s) for a total time of 70 min. Blood samples were obtained to determine the plasma substrate concentration. Region of interest of circular and rectangular shape to acquire input functions and tissue data were placed on left ventricle and myocardium. A value of 0.67 was used for lumped constant. Mean plasma substrate concentrations for three patients were 100 mg/dl (CAD), 100 mg/dl (MI), 132 mg/dl (angina), respectively. Regional MMRGlc values (mean${\pm}$SD) at lateral myocardium area for CAD, MI, and angina were 8.43${\pm}$0.24, 4.08${\pm}$0.16, and 6.15${\pm}$0.23 mg/min/100ml, respectively. Patlak tool on GE PET workstation appeared to be useful for quantitative analysis of dynamic PET images in cardiac patients, although further studies may be required for absolute quantitation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.4
• /
• pp.359-365
• /
• 1994

A oat (Avena sativa) cultivar, 'Guiri 16', was seeded on Oct. 9, Oct. 24, Nov. 9, Nov. 24, Dec. 9 of 1991 and 1992 to determine usefulness of growing degree days (GDD) for predicting growth duration and the optimum seeding date of oats for grains in Cheju province. The later the seeding, the greater the number of days to emergence but the fewer the number of days to heading and maturity. As seeding was delayed, accumulated GDD from seeding to emergence generally tended to decrease but was less subjective to a constant downward tend over seeding date than the number of days. Accumulated GDD from emergence ot heading decreased with delaying seeding and accumulated GDD from heading to maturity decreased as seeding was delayed up to Nov. 24. As seeding was delayed from Oct. 9 to Dec. 9, to Dec. 9, leaf area index at heading decreased from 7.7 to 5.1 and dry matter yield at maturity from 1920 to 823 kg /10a in 1992-1993, and culm length 120 to 89cm on an average of 1991-1992 and 1992-1993. While the number of grains per panicle and test weight were not affected by seeding date in 1991-1992 and 1992-1993, the number of panicles per m$^2$ and grain yield were decreased when oats were seeded earlier or later than Nov. 9. 1000 grain weight was not affected by seeding date in 1991-1992 but greatest at Nov. 9 seeding in 1992-1993. The results indicate that optimum seeding date of oats in Cheju province would be early November. November.

• Applied Chemistry for Engineering
• /
• v.28 no.6
• /
• pp.720-725
• /
• 2017

M(10)-Ni(5)/SBA-15(M=Ce, Nd, Sm) catalysts were prepared for the partial oxidation of methane (POM) to syngas. The catalysts were characterized by BET, TEM, and XPS. The BET-specific surface area and average pore size for M(10)-Ni(5)/SBA-15(M=Ce, Nd, Sm) were 538.8, 504.3, and $447.3m^2/g$ and 6.4, 6.8, and 7.1 nm, respectively. TEM results showed that the mesoporous hexagonol structure was formed for SBA-15, while the homogeneous dispersion of Ni and Ce particles on the surface was formed for Ce(10)-Ni(5)/SBA-15 caused by the confinment effect of SBA-15. XPS data confirmed that $Ce^{4+}$ and $Ce^{3+}$ on the surface catalyst have two oxidation states due to the lattice oxygen species ($O^{2-}$, $O^-$). The yields of POM to syngas over Ce(10)-Ni(5)/SBA-15 were 52.9% $H_2$ and 21.7% CO at 1 atm, 973 K, $CH_4/O_2=2$, $GHSV=1.08{\times}10^5mL/g_{cat.}{\cdot}h$, and these values were kept constant even after 75 h on streams. The same tendency of syngas yields was observed for M(10)-Ni(5)/SBA-15(M=Ce, Nd, Sm). These results confirm that the redox reaction of promoters including Ce, Nd, and Sm enhanced the stability and yield of catalysts.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.3
• /
• pp.127-133
• /
• 2012

To achieve low-cost and high-efficiency of thin-film solar cells applications, the sol-gel method that can be coated on a large area substrate, obtain homogeneous thin films of high purity was used. We studied structural and optical characteristics versus annealing temperature of $Cu_2ZnSnS_4$ which has kesterite structure by substitution low-cost sulfur (S) instead of high-cost selenium (Se). By analyzing XRD patterns, main peak was observed at $2{\theta}=28.5^{\circ}$ when Zn/Sn ratio is 0.8/1.2. And when we observed kesterite structure which has orientation of (112) direction, the more annealing temperature increase the bigger strength of (112) direction is. $Cu_2ZnSnS_4$ thin film showed characteristics of kesterite structure at $550^{\circ}C$. And when we calculated lattice constant, a = 5.5047 and $c=11.014{\AA}$ as same JCPDS (Joint Committee on Powder Standards) data measured. We measured optical transmittance to analyze optical characteristics. Optical transmittance was lower than 65 % at visible ray (${\lambda}=380{\sim}770nm$).

• Journal of Environmental Science International
• /
• v.18 no.4
• /
• pp.463-471
• /
• 2009

A study on vegetation in the Mangyeong River and Dongjin River basins and the surrounding regions of the Saemangeum Reclaimed Land was conducted in a series of efforts to determine the expected ecological changes in the salt marshes, to restore their vegetation, to explore the restoring force of halophyte, to examine the community mechanism and, ultimately, to rehabilitate marshy land vegetation along the lakeside, coastal dune and salt marshes of the Saemangeum Project Area. The findings of the study may be summed up as follows: Five species such as Suaeda japonica, Salicornia herbacea, Atriplex gmelini, Aster tripolium and Suaeda asparagoides that are mostly distributed in the estuary of the Saemangeum Reclaimed Land were analyzed to examine the mechanism of halophyte to maintain their community. To find out the strategies of plants for survival and the cause of forming community structure, a research was made as for appearance ratio of biomass, root lengths and germination. With regard to biomasses of halophyte, the biomass of Suaeda japonica increases rapidly, while Salicornia herbacea adopts a strategy of unstable growth pattern by which the biomass increases slowly in parallel with its slow speed of growth since initial appearance of young sapling. In contrast, Suaeda asparagoides, Atriplex gmelini and Aster tripolium choose to adapt themselves to environment promptly by being transformed into life form of annual or biennial plant, a pattern that is presumed to be favorable and stable for survival in the later stage of growth. In short, there is a sharp distinction among the 5 species: i.e. Suaeda japonica that begins to grow fast in the length of surface and underground section but slows down from the mid-stage on; Salicornia herbacea that grows slowly in the beginning step but starts to step up from the middle onward; Atriplex gmelini and Aster tripolium growing slowly in the initial stage but fast later on; and Suaeda asparagoides that turns from the constant growth in the beginning to rapid growth in the later period. The outcomes of the analysis into status of growth and influencing factors of Suaeda japonica in the sowing field that is most widely prevalent in the Saemangeum Reclaimed Land as a sort of ecological pioneer in the salt marshes showed that the average size of grass lands, density and number of individuals increase in the natural sowing field as well as in the plowing field regardless of their physical as well as physico-chemical features of the soil as the season progresses from June to October of a year.

• Journal of the Korean Geosynthetics Society
• /
• v.15 no.2
• /
• pp.25-33
• /
• 2016

This study was a basic research to obtain the knowledge of physical properties of the upper sedimented sandy soil in the Nakdong river delta area. The characteristics of shear strength and permeability with fine content and relative density were also investigated. The upper sedimented sandy soil near paddy and lower soft clay layers showed high percentage of fine content, and the rest parts had about 5% of fine content. The specific gravity regardless of depth and location was almost constant. The upper sedimented sandy soil mostly had particle size about 0.1 ~ 0.4mm regardless of sedimentation environment and has illite, a clay mineral, in the entire soil samples. The results of direct shear tests on remolded specimens of the upper sedimented sandy soil revealed that the friction angle and cohesion increased with relative density, but its effect was not significant. The fine content was significant, that as increasing it, the friction angle decreased and cohesion increased linearly. The permeability decreased with relative density and fine content, and the permeability of soil containing more than 15% of fine content was independent on the relative density.

• Journal of Navigation and Port Research
• /
• v.39 no.1
• /
• pp.55-60
• /
• 2015

The purpose of this study is to suggest a major strategy to become effective for each port in Northeast Asia by analyzing the relative efficiency of each port to determine the current level of efficiency, efficient harbors plan. Individual port of the major 16 ports in Northeast Asia was analysed targeting efficiency and relative efficiency. In this study, DEA technique was used. Of the DEA model, CCR (constant returns to scale) models and BCC (variable return to scale) model was applied to analyze the efficiency and effectiveness of the port. Then the efficiency measured through CCR model is again compared with the efficiency measured by the BCC model. In this way, the empirical analysis includes the input factors of the operating ports such as the number of berths, wharf, depth, total area of the pier, C / C numbers and output elements includes the container throughput. The results of the study show that most of the ports in China is efficient whereas those in Korea and Japan are relatively inefficient. There are some pairs of ports which has the similar input factors, like Busan port and Shanghai port, Lianyungang port and Incheon port, Dalian port and Gwangyang port, but the container throughput of them has a huge difference.