• Title/Summary/Keyword: consistency change

Search Result 327, Processing Time 0.023 seconds

A NONPARAMETRIC CHANGE-POINT ESTIMATOR USING WINDOW IN MEAN CHANGE MODEL

  • Kim, Jae-Hee;Jang, Hee-Yoon
    • Journal of applied mathematics & informatics
    • /
    • v.7 no.2
    • /
    • pp.653-664
    • /
    • 2000
  • The problem of inference about the unknown change-point with a change in mean is considered. We suggest a nonparametric change-point estimator using window and prove its consistency when the errors are from the distribution with the mean zero and the common variance. a comparison study is done by simulation on the mean, the variance, and the proportion of matching the true change-points.

Adhesive Strength in Tension of High Volume PAE-Modified Cement Mortar with High Flowability for Floor Finishing

  • Do, Jeong-Yun;Soh, Yang-Seob
    • Journal of the Korea Concrete Institute
    • /
    • v.15 no.5
    • /
    • pp.739-746
    • /
    • 2003
  • Various researches on the application of polymer dispersions to the cement mortar and concrete have been carried out in many countries like America, Japan and Germany and so on due to their high performance and good modification effect. PAE of polymer dispersion widely used in situ was employed that the high flowability may be induced in the cement mortar. In order to investigate the modification of cement mortar with high flowability by PAE and fracture mode of adhesive strength properties in tension of that, experimental parameters were set as PAE solid-cement ratio(P/C) and cement: fine aggregate(C:F) and the experiments such as unit weight, flow, consistency change, crack resistance and segregation that inform on the general properties have been done. Adhesion in tension is measured with a view to comprehending the properties and fracture mode in tensile load. Consistency change of cement mortar modified by PAE did grow better as the ratio of PAE solid-cement increased and was much superior to that of resin based flooring such as polyurethane and epoxy which recorded the loss of consistency in 90 min. after mixing. Adhesive strength in tension increased with continuity during curing period and showed the maximum in case of C:F=1:1 and P/C=20%.

A Software Consistency Management Model using Operation History (연산 히스토리를 이용한 소프트웨어 일관성 관리 모델)

  • Rho, Jungkyu
    • The Journal of Korean Association of Computer Education
    • /
    • v.5 no.4
    • /
    • pp.61-69
    • /
    • 2002
  • Software documents consist of a number of logical objects and relationships between them, and a lot of versions are generated during software development. When an object is changed, it is desirable to easily identify the change and the range of change propagation for efficient software development and maintenance. However, it is difficult to identify it in a coarse-grained object management model. To solve this problem, fine-grained object management is required. In this paper, I propose a consistency management model for fine-grained software objects based on operation history applied to edit software objects. This paper presents a formal model for consistency management at the fine-grained level. Consistency between documents is managed using dependency between objects and kinds of the operations applied to the objects so that unnecessary change propagation can be avoided.

  • PDF

A Comparative Study on the Consistency between Domestic Implementation of Sustainable Development Goals and Development Cooperation in the Area of Climate Change (지속가능발전목표의 국내이행과 개발협력 간 일관성에 관한 국별 비교와 시사점 - 기후변화 분야 -)

  • Lim, Soyoung
    • International Area Studies Review
    • /
    • v.22 no.4
    • /
    • pp.209-227
    • /
    • 2018
  • The issue of climate change, which calls for urgent and improved action by countries around the world, requires cooperation from the international community. Therefore, consistency among various policies on climate change is particularly important. This study analyzes the relationship between the implementation of SDGs and the scale of assistance in the field of climate change in order to see if there is consistency between domestic policy and aid policy to address climate change issues. An analysis of the correlation between the indices related to the domestic implementation of SDGs and ODA amounts in the field of climate change by OECD countries was conducted. As a result, there is a significant negative correlation between imported CO2 emissions and the portion of climate change ODA. On the other hand, the amount of CO2 emissions embodied in fossil fuel export is significantly positively correlated with the portion of ODA for climate change. Consistency between domestic and aid policies of OECD countries in the field of climate change is not sufficiently ensured, and climate change, the cross-cutting issue, is not being pursued in a consistent direction across national policy.

RHEOLOGICAL CONSISTENCY OF CONCENTRATED WATER-IN-OIL EMULSION

  • Park, C-I.;Yang, J-C.;Cho, W-G.;S-H. Kang
    • Journal of the Society of Cosmetic Scientists of Korea
    • /
    • v.24 no.3
    • /
    • pp.129-133
    • /
    • 1998
  • We have studied a relationship between the pattern of complex modulus change versus internal phase volume ratio and the rheological consistency of concentrated W/O emulsions with Magnesium Sulfate in the range 0.0 to 0.5 wt% and with different oil polarities, respectively. The rheological consistency with time of concentrated W/O emulsion was checked using Fudoh Rheometer and the coalescence of deformed water droplets was examined using polarized light microscope(LEICA DMRP). To find the pattern of complex modulus change of the concentrated emulsions versus internal phase volume ratio, the effect of varying water phase volume fraction from 0.78 up to 0.85 on viscoelastic measurements was investigated using rotational rheometer (HAAKE Rheostress RS 50). The rheological consistency was mainly destroyed by the coalescence of the deformed water droplets. The greater the increase of complex modulus was, the less coalescence occurred and the more consistent the concentrated emulsions were. And the pattern of complex modulus increase versus volume ratio has been explained with the resistance to coalescence of the deformed interfacial film of water droplets in concentrated W/O emulsion.

  • PDF

CHANGE-POINT ESTIMATION WITH SAMPLE FOURIER COEFFICIENTS

  • Kim, Jae-Hee
    • Proceedings of the Korean Statistical Society Conference
    • /
    • 2002.11a
    • /
    • pp.109-114
    • /
    • 2002
  • In this paper we propose a change-point estimator with left and right regressions using the sample Fourier coefficients on the orthonormal bases. The asymptotic properties of the proposed change-point estimator are established. The limiting distribution and the consistency of the estimator are derived.

  • PDF

Development of Polymer-Modified Cementitious Self-Leveling Materials for Thin Coat

  • Kim, Wan-Ki;Do, Jeong-Yun;Soh, Yang-Seob
    • KCI Concrete Journal
    • /
    • v.13 no.2
    • /
    • pp.58-66
    • /
    • 2001
  • Recently, polymer-modified mortar has been studied for proposed use on industrial floors as top coat with thin thickness, typically 5~15mm. The purpose of this study is to evaluate basic properties of self-leveling materials using polymer dispersions as kinds of SBR, PAE, St/BA with thin coat (under 3mm). Superplasticizer and thickener have been included in the mixes to reduce bleeding and drying shrinkage as well as to facilitate the workability required. The self-leveling materials using four types of polymer dispersion are prepared with polymer-cement ratio which respectively range from 50% and 75%, and tested for basic characteristics such as unit weight, air content, flow, consistency change and adhesion in tension. From the test results, the self-leveling materials using PAE emulsion at curing age of 28days are almost equal to those of conventional floor using urethane and epoxy resin. The adhesion in tension of self-leveling mortars using SBR latex and PAE emulsion at curing age of 3days is over 17 kgf/cm$^2$(1.67MPa). Consistency change is strongly dependent on the type of polymer dispersion. It is concluded that the self-leveling materials using polymer dispersions can be used in the same manner as conventional floor using thermosetting resin in practical applications, in the selection of polymer dispersions.

  • PDF

A Change Tracking Technique for Maintaining Consistency of Game Design Artifacts (게임 기획 산출물의 일관성 유지를 위한 변경 추적 기법)

  • Park Jae-Hyun;Yi Du-Won;Rhew Sung-Yul
    • The KIPS Transactions:PartD
    • /
    • v.13D no.1 s.104
    • /
    • pp.103-110
    • /
    • 2006
  • The Game development process that the Korea Game Development Infinity researches and publishes has laid important groundwork for the game industry. However, the game design cannot guarantee a software quality because an artifact is made incorrect by a game planner's new idea and modification. In this paper theorized the system to maintain artifacts consistently that is generated in planning phase and make changed contents traceable. First, it defined an ACT graph to represent relation of between artifacts, a ACT table that traces and manages it changes and a table of artifacts change history. Also, it suggested the ACT process applying as we mentioned above. Then we worked a case study to verify the change tracking technique which is presented. In a case study, we find game designer is capable to grip and modify a change of artifacts when it occurs a change of game design artifacts. As a result of that, we can save the time and effort to maintain the consistency among game design artifacts.

Studies on Semisolid Infant Foods (III)-Rheological Properties of the Products- (반고체 이유보충식에 관한 연구 (III)-생물학적 조사-)

  • 이영춘
    • Journal of Nutrition and Health
    • /
    • v.19 no.1
    • /
    • pp.3-15
    • /
    • 1986
  • This study was intended to investigate the rheological properties of the development formula of infant foods and the results are summarized as follow ; 1) Consistency of starch solutions measured by Brabender Anylograph and Brookfield viscometer showed that waxy rice and riece with malt had lower consistency and more rheological stability.The flow type of tested raw materials and formula was found to ? pseudoplastic, as judged by n-value of 0.332 -0.692, and no yield value. 2) The influenced of temperature on consistency could be accounted for by the equation, In (n) = K(1/T) + const. this relationship indicated that consistency of tested sample increased as temperature decreased. The consistency of waxy rice, rice with malt and formula A were less affected by the temperature change. 3) Infant foods with malt(formula A ) ad with waxy rice maintained better freeze-thaw stability in terms of consistency and starch aggregation indicating that this infant food could be stored for a long term in the freezer section of the home refrigeratory without adverse effect on the product quality. 4) From the above experiments, it would necessarily follow that infant food can be easily made at home the food-stuffs generally available around us, and that the easiest and safest way to store them lies in making them into semisolid state, and in keeping them in frozen state.

  • PDF

Consistency preservation techniques for Location Register System in Mobile Networks

  • Kim, Jang-Hwan
    • International Journal of Internet, Broadcasting and Communication
    • /
    • v.12 no.2
    • /
    • pp.144-149
    • /
    • 2020
  • A database called Home Location Register(HLR) plays a major role in location management in mobile cellular networks. The objectives of this paper are to identify the problems of the current HLR system through rigorous analysis, to suggest solutions to them. The current HLR backup method is a process of simply writing the changed memory SLD block to disk, which has a problem in maintaining database consistency. Since information change and backup are performed separately by separate processes, there is a risk of information inconsistency when an error restart occurs. To solve this problem, a transaction concept was introduced for subscriber-related operation functions and a recovery method through logging and checkpointing was introduced. The subscriber related functions of tasks terminated normally by the suggested process are recovered with consistency even after system restarts. Performance is also not affected seriously because disk tasks for log occur with only subscriber related functions.