• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.548-550
• /
• 2010

The droplet motion on a flat substrate with contact angle hysteresis is studied by solving the equations governing the conservation of mass and momentum. The liquid- gas interface is determined by an level-set method which is based on a sharp-interface representation for accurately imposing the matching or coupling conditions at the interface. The method is modified to treat the dynamic contact angle at the liquid-gas-solid interface. The computations are performed to investigate a droplet impact and merging pattern on a flat substrate to find a optimal condition in a micro-line patterning process. The effects of dynamic contact angles on droplet motion are quantified.

• Korean Journal of Agricultural Science
• /
• v.35 no.1
• /
• pp.69-83
• /
• 2008

The self-supply rate of Korea in 2006 was approximately 27.3 % by importing 13.99Mt for 19.79Mt of demanded amount. Among the imported crops, wheat, corn, and soybean consumed 95 % for the total imported amount, and wheat, corn, and soybean were 3.5Mt(Table use : 0.22Mt; Feed stuff : 0.13Mt), 8.7Mt(Table use : 0.19Mt; Feed stuff : 0.68Mt), and 1.2Mt (Table use : 0.03Mt; Feed stuff : 0.09Mt), respectively. On the other hand, our government has prepared the strategies for a great fear of food according to sharp price rise of the international crops by maintaining the self-supply rate of 5 % excluding 5.23Mt of rice in Korea. Also concern for recycled energy known as future energy for era of high oil price and global warming due to green house gas is rapidly growing. Therefore, our country which has relied on import of the whole oil needed in Korea and has to keep Kyoto Agent to request reduction of green house gas fully support research and practical use for agricultural products as resource of alternate energy. At first, we have to develop the mass production technology in order to secure a program of self-supply of food for bioenergy production utilizing agricultural product in Korea. But we assume that this matter is difficult to achieve under the current agriculture system that more emphasizes the environment conservation such as environmentally-friendly agriculture than production of food.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2000.11a
• /
• pp.91-97
• /
• 2000

The conventional model did not take momentum conservation into consideration when the electron absorbs and emits the photons. II-ray provides momentum conservations on any directions of the entering photons, and also the electrons have radial momentum conservations and fully elastic bouncing between two atoms, in the new atom model. Conventional atom model must be criticized on the following four points. (1) Natural motions between positive and negative entities are not circular motions but linear going and returning ones, for examples sexual motion, tidal motion, day and night etc. Because the radius of hydrogen atom's electron orbit is the order of 10$^{-11}$ m and the radia of the nucleons in the nucleus are the order of 10$^{-l4}$m and then the converging n-gamma rays to the nucleus have so great circular momentum, the electron can not have a circular motion. We can say without doubt that any elementary mass particle can have only linear motion because of the n-rays' hindrances, near the nucleus. (2) Potential energy generation was neglected when electron changes its orbit from outer one to inner one. The h v is the kinetic energy of the photo-electron. The total energy difference between orbits comprises kinetic and potential energies. (3) The structure of the space must be taken into consideration because the properties of the electron do not change during the transition from outer orbit to inner one even though it produces photon. (4) Total energy conservation law applies to the energy flow between mind and matter because we daily experiences a interconnection between mind and body. An understanding of the mechanisms responsible for the control of normal proliferation and differentiation of the various cell types which make up the human body will undoubtedly allow a greater insight into the abnormal growth of cells, A large body of biochemical evidence was eventually used to generate a receptor model with an external ligand binding domain linked through a single trans-membrane domain to the cytoplasmic tyrosine kinase and autophosphory-lation domains. The ligand induced conformational change in the external domain generates either a push-pull or rotational signal which is transduced from the outside to the inside of cell.l.ell.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.6
• /
• pp.845-848
• /
• 2016

The effects of temperature and irradiance on the growth of Ulva prolifera O.F. $M{\ddot{u}ller$ (Chlorophyta), which has been used commercially as food in Korea, were examined in laboratory culture to conserve the strain. Experiments were conducted under combined factors of temperatures of 5, 10, 15, 20 and $25^{\circ}C$ and irradiances of 30, 50, 80 and $100{\mu}mol\;m^{-2}s^{-1}$. The maximum growth of the U. prolifera germlings was observed at $20^{\circ}C$ and $80{\mu}mol\;m^{-2}s^{-1}$, and the minimum growth was recorded at $5^{\circ}C$ and $100{\mu}mol\;m^{-2}s^{-1}$. Considering these results, the species appears to survive under wide ranges of temperature and irradiance, although growth is inhibited by high irradiances of over $100{\mu}mol\;m^{-2}s^{-1}$. This appears to be due to the in situ habitat niche of Ulva prolifera, which is the middle to lower intertidal zone. In conclusion, optimal conditions for the long-term conservation of Ulva prolifera can be established under relatively low temperatures ($5^{\circ}C$) and high irradiance ($100{\mu}mol\;m^{-2}s^{-1}$), while the optimal conditions for mass production are $20^{\circ}C$ and $80{\mu}mol\;m^{-2}s^{-1}$.

• Journal of Conservation Science
• /
• v.6 no.1 s.7
• /
• pp.3-14
• /
• 1997

Twelve Punchong sherds collected in Hakbongni, Kongju where the well known iron-painted on white slip were manufactured from late 15C to early 16C were analyzed for their composition and microstructure. The composition of the body was analyzed by X-ray fluorescence and that of glaze by electron probe micro-analyzer. Microstructure was observed by optical microscope, polarizing microscope, EPMA, and X-ray diffractometer. The results of composition of body and glaze of Hakbongni were compared with those of Punchong from Yongsuri, Boryong which was close to Hakbongni. The composition of body and glaze of these two areas were compared by principal component analysis using SPSS program. Hakbongni bodies have higher silica and flux materials but lower alumina and their glaze have higher silica, soda, iron oxide but lower alumina, calcia. Hakbongni punchong itself is divided into two groups. Their glaze is lime type. There are many remnant minerals, such as quartz, large feldspar mass with partially melted surrounding area, albite, biotite, and iron-oxide. From such a microstructure we can assume that preparation of raw material was rather crude and firing temperature quite low. Iron-painted material is identified as Mg/Fe/Al spinel by composition analysis and XRD pattern.

• Economic and Environmental Geology
• /
• v.54 no.1
• /
• pp.137-150
• /
• 2021

The rock-carved standing Buddha triad in Seoak-dong is a large stone Buddha statue of the Unified Silla era (AD 676 to 935) in ancient Korea, built near the top of the southeastern side of mountain Seondosan in Gyeongju, is characterized by its locational importance, the powerful Amitabha and the gentle sculptural technique of the Bodhisattva. In particular, Amitabha Buddha in andesite rock slope with biotite granite pedestal and two Bodhisattva parallel made by alkali granites seems to express the dignity through the color and texture of the stones. In the Amitabha Buddha, deterioration characteristics are accelerating due to the combination of various joint systems, instability of the slopes and relaxation by the root pressure of plants occurring at the top. In addition, physical properties have deteriorated owing to the increase of discontinuous surfaces as joints, cracks and scalings, and the coverage of algae and lichen is also high. Therefore, deterioration degree in Buddha triad is accelerated due to the physical weathering characteristics from natural rock mass and various biological invasion.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.8
• /
• pp.49-60
• /
• 2020

A fully coupled thermo-hydro-mechanical model is established to evaluate frost heave behaviour of saturated frost-susceptible soils. The method is based on mass conservation, energy conservation, and force equilibrium equations, which are fully coupled with each other. These equations consider various physical phenomena during one-dimensional soil freezing such as latent heat of phase change, thermal conductivity changes, pore water migration, and the accompanying mechanical deformation. Using the thermo-hydro-mechanical model, a sensitivity analysis study is conducted to examine the effects of the geotechnical parameters and external conditions on the amount of frost heave and frost heaving rate. According to the results of the sensitivity analysis, initial void ratio significantly affects each objective as an individual parameter, whereas soil particle thermal conductivity and temperature gradient affect frost heave behaviour to a greater degree when applied simultaneously. The factors considered in this study are the main factors affecting the frost heaving amount and rate, which may be used to determine the frostbite sensitivity of a new sample.

• Korean journal of applied entomology
• /
• v.33 no.4
• /
• pp.207-215
• /
• 1994

The brown planthopper (BPH), Nilaparuata lugens, is the major pest 01 nce in Asla. Cument control tactics rely pnmalily on chemical ~nsecticides and resistant nce varieties In Korea, the most important biolog~cal conb-ol agent appears to be the naturally-occuning, mermlthid nematode, Agarnermrs unka. Although parasitism of BPH is highly variable from place to place and from year to year. the rnermithid is a promising biological control agent because it reduces the fecundity of the host and ultimately causes its death. The memithid has only one generation per year compared to the three to four generations of BPH, but the mermithid lemales stagger their egg production so that many individuals in all BPH generations are parastized. Augmentation of this rnermithld into BPH populations is only psslble on a limited scale because it is an obligate parasite and mass production technology has yet to be developed. Conservation of naturally-occumng populations through cultural techniques and the use of compatible resistant rice varieties and chemical insecticides may lead to an effective integrated pest management program for BPH.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.4
• /
• pp.5-20
• /
• 2022

To analyze the flow and density variations in debris flows, a two-phase finite volume model simplified with momentum equations was constructed in this study. The Hershel-Buckley rheology model was employed in this model to account for the internal and basal friction of debris flows and was utilized to analyze complex topography and entrainments of basal soil beds. In order to numerically solve the debris flow analysis model, a finite volume model with the Harten-Lax-van Leer-Contact method was used to solve the conservation equation for the debris flow interface. Case studies of circular dam failure, non-Newtonian fluid dam failure, and multiple debris flows were analyzed using the proposed model to evaluate shock absorption capacity, numerical isotropy, model accuracy, and mass conservation. The numerical stability and correctness of the debris flow analysis of this analysis model were proven by the analysis results. Additionally, the rate of debris flow with various rheological properties was systematically simulated, and the effect of debris flow rheological properties on behavior was analyzed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.7
• /
• pp.1475-1482
• /
• 2009

In this paper, a computer simulation is developed for isotachophoretic protein separation in a serpentine micro channel for optimal lab on a chip design using 2D Finite Element Method. This 2D ITP model is composed of 5 components such as hydrochloric acid as Leader, caproic acid as terminator, acetic acid and benzoic acid as two proteins, and histindine as background electrolyte. The computer model is based on mass conservation equation for 5 components, charge conservation equation for electric potential, and electro neutrality condition for pH calculation. For the validation of the 2D spatial ITP model, the results are compared with the Simul5 developed by Bohuslav Gas Group. The simulation results are in a good agreement in a ID planar channel. This proves the precision of our model. The 2Dproteinseparation is conducted in a 2D curved channel for Lab on a chip design and dispersions of proteins are revealed during the electrophoretic process in a curved shape.