• 한국산업융합학회 논문집
• /
• 제9권4호
• /
• pp.309-315
• /
• 2006

Important material properties of UCAS rod can divide by tension characteristic of base rod part and both end part of U type anchor. Tensile properties of base rod part need as concrete reinforcement material as an alternative material of reinforcing rod, and tensile properties of U type anchor is used at connection with UCAS rod. This treatise carry out tensile test of UCAS rod, examine necessary properties such as strength, elastic modulus and maximum capacity of UCAS rod as reinforcement material of concrete. Also, to examine material properties carry out tensile test of U type anchor.

• 한국소음진동공학회논문집
• /
• 제20권6호
• /
• pp.583-592
• /
• 2010

Equations of motion of thin-walled composite H-type cross-section beams exposed to concentrated harmonic and non-harmonic time-dependent external excitations, incorporating a number of nonclassical effects of transverse shear, primary and secondary warping, and anisotropy of constituent materials are derived. The forced vibration response characteristics of a composite H-type cross-section beam exhibiting the circumferentially asymmetric stiffness(CAS) configuration are exploited in connection with the structural bending-torsion coupling resulting from directional properties of fiber reinforced composite materials.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.157-159
• /
• 2008

Generally, Capacitor charging power supply (CCPS) consist of the full-bridge inverter, LC resonant tank and capacitance load. The multi-connection systems are normally used for high voltage or high power application. In this paper, conventional parallel operation resonant type and proposed series operation PWM type CCPS for pulse corona occurrence of DeSOx, DeNOx system using magnetic pulse compressor make a comparison. The effect of proposed CCPS is verified by circuit characteristics analysis of parallel operation resonant type and series operation PWM type, and it is confirmed by simulation result.

• 한국정밀공학회지
• /
• 제22권8호
• /
• pp.57-63
• /
• 2005

Development of a locomotive mechanism fer the capsule type endoscopes will largely enhance the ability to diagnose disease of digestive organs. In connection with it, most of researches have focused on an installable locomotive mechanism in the capsule. In this paper, it is introduced that the movement of a capsule type endoscope in digestive organ can be manipulated by magnetic force produced outside human body. Since the magnetic force is provided by permanent magnets, no additional power supply to the capsule is required. Using a robotic manipulator for locating the external magnet, the capsule motion control system can cover the whole human digestive organs. This study is particularly concentrated on dither motion effect to improve the mobility of capsule type endoscope. It was experimentally found out that the friction coefficient between the capsule and digestive organ can be remarkably reduced by superposing yawing or rolling dither motion on the translatory motion. In this paper, the experimental results obtained with the direction, amplitude and frequency of sinusoidal dither motion changed is reported.

• 산업기술연구
• /
• 제21권A호
• /
• pp.59-64
• /
• 2001

This paper analyzes the performance of the several types of ACL(Asynchronous ConnectionLess) packets used in Bluetooth according to a BER(Bit Error Rate) and a packet length and proposes an optimal packet type and an optimal size of the packet being able to be used under the given BER. This paper proposes how to obtain the optimal packet type and the optimal size of the packet maximizing the performance measure under the given BER. In addition, this paper shows that the optimal type and size of the packet maximizing the throughput are different from those maximizing the mean transmission time. This occurs because the Bluetooth uses not only one type of packet but also various types of packets.

• The Journal of Advanced Prosthodontics
• /
• 제7권4호
• /
• pp.288-293
• /
• 2015

PURPOSE. The aim of this study was to evaluate the effect of cyclic loading and screw retightening on reverse torque value (RTV) in external and internal type implants. MATERIALS AND METHODS. Cement-retained abutments were connected with 30 Ncm torque to external and internal type implants. Experimental groups were classified according to implant connection type and retightening/loading protocol. In groups with no retightening, RTV was evaluated after cyclic loading for 100,000 cycles. In groups with retightening, RTV was measured after 3, 10, 100 cycles as well as every 20,000 cycles until 100,000 cycles of loading. RESULTS. Every group showed decreased RTV after cyclic loading. Before and after cyclic loading, external type implants had significantly higher RTVs than internal type implants. In external type implants, retightening did not affect the decrease in RTV. In contrast, retightening 5 times and retightening after 10 cycles of dynamic loading was effective for maintaining RTV in internal type implants. CONCLUSION. Retightening of screws is more effective in internal type implants than external type implants. Retightening of screws is recommended in the early stage of functional loading.

• 한국학교수학회논문집
• /
• 제17권3호
• /
• pp.337-358
• /
• 2014

교육과학기술부는 2012년 1월에 '수학교육 선진화 교육'을 발표하며 주요방향 및 과제로 '생각하는 힘을 키우는 수학', '쉽게 이해하고 재미있게 배우는 수학', '더불어 함께하는 수학'을 제시하며 '쉽게 이해하고 재미있게 배우는 수학'에 해당되는 내용으로 스토리텔링 기법을 적용한 교과서를 제시하였다. 본고에서는 2009 개정 교육과정에 따른 고등학교 1학년 수학I 교과서에 스토리텔링 기법을 어떻게 적용하였는지 분석해 보고, 고등학교 1학년 교사와 학생들의 스토리텔링에 대한 이해와 활용실태를 조사하고자 하였다.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2006년도 추계학술발표대회 논문집
• /
• pp.81-85
• /
• 2006

The current environmental issue is how a dwelling adapts into a given climate in which the design is applied by ecology without damaging the natural environment. In another word, the main issue in the twenty first century will be how we meet the human needs to dwellings applied by the residential environment. Therefore, we have to provide a hospitable place for residents' mental and physical health through "Green Design," emerging as the critical design of urban collective dwellings. Based on these conceptions, the purpose of this study is to suggest the way of designing the urban collective dwelling applied by ecology, proffering wealthy life style to residents with the preservation of natural environment as applying an ecological concept into the design of collective dwellings that represent a contemporary housing type for urban residents. In order to design the urban collective dwelling applied by ecology, this study introduces the outdoor design in friendly surroundings, the collective construct of a delightful housing, and the organic connection between inside and outside rooms.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.186.1-186.1
• /
• 2010

풍력발전 설비의 발전기로는 구조가 간단하고 견실한 유도형 발전기가 일반적으로 사용되고 있다. 풍력발전은 계통 연계시에 정격전류의 7~8배의 돌입전류가 흘러 발전저하를 무시하기 어렵다. 따라서, 돌입전류 억제 및 대책의 검토가 필요하다. 본 연구는 MATLAB/SIMULINK를 통해 유도기형 풍력발전기를 모델링 및 시뮬레이션하고, 유도기형 풍력발전기 계통연계시 발생하는 돌입전류를 저감하는 방법에 대해 살펴보았다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1847-1852
• /
• 2004

This article provides the connection between feedback stabilization and interpolation conditions for n-D linear systems (n > 1). In addition to internal stability, if one demands performance as a design goal, then there results an n-D matrix Nevanlinna-Pick interpolation problem. Application of recent work on Nevanlinna-Pick interpolation on the polydisk yields a solution of the problem for the 2-D case. The same analysis applies in the n-D case (n > 2), but leads to solutions which are contractive in a norm (the "Schur-Agler norm") somewhat stronger than the $H^{\infty}$ norm. This is an analogous version of the connection between the standard $H^{\infty}$ control problem and an interpolation problem of Nevanlinna-Pick type in the classical 1-D linear time-invariant systems.