• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.5
• /
• pp.708-720
• /
• 1993

The new preventive control mechanisms for traffic management in BISDN/ATM networks can be divided into Connection Admission Control(CAC), Usage Parameter Control (UPC), and Priority Control. Of these mechanism, Usage Parameter Control continuously monitors the parameters admitted in the network's entry point to guarantee quality of service of connections already admitted. Upon detecting traffic that violates the negotiated parameter, it takes the necessary control measures to prevent congestion. Among these traffic control methods, this paper focuses on the Usage Parameter Control method, and proposes and designs GRACE-LB(Guaranteed Rate Acceptance & Control Element-using Leaky Bucket) which improves upon existing UPC models. GRACE-LB modifies the previous LB model by eliminating the cell buffer, dividing the token Pool into two pools, Long-term pool, Short-term pool, and changing the long-term token generating form using 'Cycle Token' into the same bursty form as the traffic source. Through this, GRACE-LB achieves effective control of the Average Bit Rate(ABR) and burst duration of bursty multimedia traffic which previous LB models found difficult to control. Also, since GRACE-LB can e implemented using only simple operations and there are no cell buffers in it, it has the merit of being easily installed at any place.

• Journal of the Korea Concrete Institute
• /
• v.19 no.4
• /
• pp.401-409
• /
• 2007

The objective of this research is to provide better knowledge on the behavior of strong axis SRC column-RC beam joint, supported by experimental results, that can be broadly applicable to many structures. For this purpose, firstly literature reviews and field survey were made to classify the most commonly used for these types of joints. Then, experimental program was designed and performed including 6 SRC column-RC beam joint specimens designed with various joint details. Using the experimental results obtained from the quasi-static cyclic tests, structural performances of the joints such as hysteretic curves, maximum strength capacities, strength degradation beyond the maximum strength, ductilities, and energy dissipation capacities were investigated. Test results showed that specimens with wide beam shape (RCW-P, RCW-W, RCW-F) and T beam shape (RCT-W) showed better structural performances than the bracket type specimens (HBR-L, HBR-S). These specimens also revealed to have higher strength capacities than the nominal design strength. However, H beam bracket type specimens (HBR-L, HBR-S) need further study both analytically and experimentally to verify the reason for unexpected structural performances.

• Korean Journal of Optics and Photonics
• /
• v.5 no.3
• /
• pp.423-430
• /
• 1994

We designed and fabricated the single mode fiber pigtailed DFB-LD module for 2.5 Gbps optical communication system. In the design of the DFB-LD module, we made the module divided into two parts of inner sub-module and outer 14-pin butterfly package and cylindrical shaped sub-module contain quasi confocal 2 lens system including optical isolator and electrical connection between these parts via hybrid substrate of bias T circuit. Laser welding was used to assemble the sub-module which requires accurate fixing between optical elements. The fabricated DFB-LD module showed optical coupling efficiency of 20% and - 3 dB small signal response of more than 2.6 GHz. We confirmed mechanical reliability of the module by temperature cycle test where the tested module exhibit optical power fluctuation of less than 10%. Finally we evaluated the performance of the fabricated DFB-LD module as light source of 2.5 Gbps optical communication system, sensitivity of - 30.2 dBm was obtained through 47 km optical fiber transmission under the criterion of $1\times10^{-10}$ BER and transmission penalties were 1.5 dB caused by extinction ratio and 1.0 dB caused by chromatic dispersion of normal single mode fiber. fiber.

• Journal of Science of Art and Design
• /
• v.7
• /
• pp.105-127
• /
• 2005

This research is on the characteristics and roles of important cities of Germany based on the history of the modern art museum and its possessions. Especially, it is focusing on the modern art museums in the western Germany including Dusseldorf, Koln, and Frankfrut that have shown economic recovery from the Miracle of Rhine; the capital city of Germany, Berlin, as well as Munich, the second capital city of Germany. Here, it harmonizes with the tradition of the past and simultaneously, it spreads the concept and role of the new museum as a forerunner. After the WWII, this is the most active of supporting investment for art museums and authors from the economic development. Also, it represents Germany with its national promotion of culture and arts. The modern art museums of Germany emphasize the mission that they exist for the people and the nation as well as creation of new art culture. These art museums working for national culture and art development do not simply collect and preserve arts. They induce active involvement from the public and keep in mind of national objectives. Here, art museums become and educational setting for the people and a room for new art culture. This research is on Germany modern art museum and it is composed of important 'public institutions' of Germany that critically influence the growth of world-renown authors. After the unification of Germany, Munchen and the western region became an important places centering around new Berlin modern art museum. They are the best places that show the national objectives and regional characteristics. Also, there are art museum educational curriculum and open space for the people by explaining exhibition plans and contents. Furthermore, there are two characteristics of German modern art museums that are noteworthy. Firstly, there are Berlin's Neue Nationalgalerie, Munchen's Pinakothek de Moderne, and Dusseldorf's 'K20' (Kunstsammlung N-Westfalen K20) that are the roots of modern art. These modern art museums exhibit popular author's collection repeatedly. This has a tendency to standardize audiences' view or to make audiences bored. It is becoming more like a trend for art work to appear and disappear. Despite these problems, German modern art museums play a critical role for a new cultural art creation and for the national identity by attempting to show the works of domestic authors as well as an intensive collection of world-renown authors' works. Secondly, there is a role as a new art museum to work together with people. It strives to continuously educate difficult modem arts, exhibits in an open space stimulating interest, participation, and conversations. From these roles, Hamburger Bahnhof Museum fur Gegenwart or Dusseldorf's 'K21, Frankfurt Museum $f\"{u}r$ Moderne Kunst, $Kf\"{o}ln$ Museum Ludwig are given new attention. Here, they emphasize the importance of communicating with the audiences and provides experiences that are different from the original spaces by showing the architecture tecture style of the art museum. In conclusion, German modern art museums attempt various changes by connecting to art education. With art museum activities, there forms a connection between arts and the lives of people, and from this, creative cultural art focused on the art museum borns. This is not only limited to Germany, the U.S., etc. We, too, should pay attention to new art culture creation from changes of role and function of modern art museums.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.2 no.2 s.3
• /
• pp.43-54
• /
• 2003

As the demand for ubiquitous mobile wireless Internet grows, vehicles are receiving a lot of attention as new networking platforms. The demand for 4G all-IP networks encourages vehicle networks to be connected using IPv6. By means of network mobility (NEMO) support, we can connect sensors, controllers, local ,servers as well as passengers' devices of a vehicle to the Internet through a mobile router. The mobile router provides the connectivity to the Internet and mobility transparency for the rest of the mobile nodes of an in-vehicle nv6 network. So, it is .important for the mobile router to assure reliable connection and a sufficient data rate for the group of nodes behind it. To provide reliability, this paper proposes an adaptive multihoming architecture of multiple mobile routers. Proposed architecture makes use of different mobility characteristics of different vehicles. Simulation results with different configurations show that the proposed architecture increases session preservation thus increases reliability and reduces packet loss. We also show that the proposed architecture is adaptive to heterogeneous access environment which provide different access coverage areas and data rates. The result shows that our architecture achieves sufficient data rates as well as session preservation.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.4
• /
• pp.417-429
• /
• 2009

Since the introduction of the concept of osseointegration in dental implants, high long-term success rates have been achieved and accepted as viable option for the treatment of fully and partially edentulous patients. Although the use of domestic implants have increased dramatically, there are few studies on domestic implants with clinical and objective long-term data. 96 endosseous implants placed in 31 patients at Wonkwang University Sanbon Dental Hospital were examined to determine the effect of various factors on implant survival rate and marginal bone loss, through clinical and radiographic results. The design of endosseous implant used to this study is straight with the microthread.(GS II RBM Fixture) 1. 3 fixtures were lost, resulting in 96.9% cumulative survival rate. 2. Survival rate in fifties was significantly lower (93.6%) and no significant difference in marginal bone loss was found according to gender. 3. Survival rates were 95.6% in the maxillary molar area and 97.3% in the mandible molar area. 4. No significant difference in survival rate was found according to presence of bone grafts, type of prostheses, implant position, and length and diameter of implant. 5. A factor influencing marginal bone loss was presence of type of prostheses, while facters such a length, diameter of fixture and bone grafts had no statistically significant effect on crestal bone loss. This study indicates the amount of marginal bone loss around implant has maintained a relative stable during follow-up periods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.4
• /
• pp.659-666
• /
• 2006

Servo-motors are used as key components of automated system by performing precise motion control as accurate positioning and accurate speed regulation in response to the commands from computers and sensors. Especially, the linear brushless servo-motors have numerous advantages over the rotary servo motors which have connection with the friction induced transfer mechanism such as ball screws, timing belts, rack/pinion. This paper proposes an estimation method of unknown motor system parameters using the informations from the sinusoidal driving type linear brushless DC motor dynamics and outputs. The estimated parameters can be used to tune the controller gain and a disturbance observer. In order to meet this purpose high performance Digital Signal Processor, TMS320F240, designed originally for implementation of a Field Oriented Control(FOC) technology is adopted as a controller of the liner BLDC servo motor. Having A/D converters, PWM generators, rich I/O port internally, this servo motor application specific DSP play an important role in servo motor controller. This linear BLDC servo motor system also contains IPM(Intelligent Power Module) driver and hail sensor type current sensor module, photocoupler module for isolation of gate signals and fault signals.

• Journal of Broadcast Engineering
• /
• v.17 no.4
• /
• pp.584-595
• /
• 2012

Recently, 3D stereoscopic video and HTTP adaptive streaming technologies have received a lot of attention from relevant industrial fields and markets in terms of multimedia contents and delivery services, respectively. It is expected that promising and marketable service models can be created by means of these noticeable two technologies. However, current standard specifications do not provide a method for organized connection between those two technologies. 3D stereoscopic video services are weighted in broadcasting and storage services that are only available under environments in which the network bandwidth is guaranteed or free. Also, HTTP adaptive streaming technologies only provide plain 3D service methods that are dependent on particular Codec. Therefore, this paper proposes 3D video delivery format for HTTP adaptive streaming service which enables stable and seamless display for various stereoscopic video sequences over internet networks. The proposed technology is designed on the basis of Stereoscopic Video Application Format which is a service-oriented standard specification for storing stereoscopic video sequences. Also, this delivery format is directly applicable over DASH that is the representative standard technology for HTTP adaptive streaming services. The delivery format proposed in this paper has been submitted to MPEG and it has been accepted as a working draft, thus it expected to pave the way for practical industrialization in relevant fields from now on.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.497-508
• /
• 2020

The paradigm focusing on learner-centered classes and the introduction of flipped learning through the connection between online and offline have been increasing. This study proved the educational effect by applying flipped learning to the basic draping course within the fashion practical course and revealed the implications for flipped learning from the instructor's perspective. The research methods are theatrical research and model development research in order to guide basic drape utilizing flipped learning. The study results revealed that learners' satisfaction was very high about the basic draping course combined with flipped learning, and it showed that students were very satisfied with the learning-related video because it can compensate for the decrease in education efficiency according to the number of attendees and improve education. Improvements shall include technical and content supplementation of video learning materials and presentation of documented learning materials, in addition to video materials. From the instructor's perspective, time needs to be set aside for video shooting and editing, a view of the composition of education from the learner's perspective, and an in-depth understanding of the instructor's curriculum for flipped learning design.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.3
• /
• pp.130-139
• /
• 2016

A frequency of earthquake occurrence in the Republic of Korea is increasing over the past few decades. In this situation, an importance of earthquake prevention comes to the fore because the earthquake does damage to structures and causes severe damage of human life. For the earthquake prevention, a real-time vibration measurement for structures is important. As an example, the United States of America and Japan have already been monitoring real-time earthquake acceleration for the important structures and the measured acceleration data has been managed by forming database. This database could be used for revising the seismic design specifications or predicting the damage caused by earthquake. In Korea, Earthquake Recovery Plans Act and Enforcement Regulations are revised and declared lately. Ministry of Public Safety and Security is constructing a integrated management system for the measured earthquake acceleration data. The purpose of this research is to develop a real-time vibration monitoring and analysis system for structures which links to the integrated management system. The developed system contains not only a monitoring function to show real-time acceleration data but also an analysis system to perform fast fourier transform, to obtain natural frequency and earthquake magnitude, to show response spectrum and power spectrum, and to evaluate structural health. Additionally, this system is designed to be able to link to the integrated management system of Ministry of Public Safety and Security. It is concluded that the developed system can be useful to build a safety management network, minimize maintenance cost of structures, and prevention of the structural damage due to earthquake.