• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.10
• /
• pp.1893-1904
• /
• 2000

Nitrogen compounds are one of the major pollutants which cause eutrophication problems of the river or lake and red tides problems of the ocean. Currently available technologies for the removal of nitrogen compounds are mostly biological treatment. However, biological treatment is only effective for the wastewater which contains low concentration of nitrogen compounds. Leachate from solid waste landfill or industrial wastewater which contains high concentration of nitrogen can not be effectively treated by most of the currently available biological treatment technologies. With this connection. the objective of this study is to examine the applicability of ammonia stripping technology for the removal of high concentration of ammonia nitrogen compounds of the leachate from solid waste landfill. It can be concluded that ammonia stripping technology which was placed before the biological treatment process was very effective for the removal of high concentration of ammonium compounds. The chemical cost for the ammonia stripping was 16 percent higher than MLE process, so other methods like sludge recycling are needed for the reduction of operation cost. Further details are discussed in this paper.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.21 no.1
• /
• pp.11-17
• /
• 2015

The increase of international and domestic trade according to global industrialization and economic growth has raised the national logistic cost in connection with physical distribution of articles. In order to reduce these costs and rise up national industrial competitiveness, Korea has also tried to improve the efficiency of logistics with various methods as advanced countries did. Especially, Korea government has decided standard dimension of pallets with T11 ($1100{\times}1100mm$) on the basis of unit load system in early 2000s, and certification program for logistics equipments has been operated to keep up the compatibility for the equipments and packaging with modulation of T11. Consequently, this certification program has contributed to extend standardization for logistics and to grow up 3 party logistics, but compared with advanced countries, the rate of national logistics cost to GDP (gross domestic product) still shows about 3% gap as demands for certification have been decreased in the recent. In this study, therefore, we proposed the development of logistics certification system based on social needs as a policy device to activate logistic industry as well as improve the efficiency of national logistics after we had analyzed all of certification programs for logistics being run in Korea. Namely, the first is the development of certification project for Northeast Asia's logistics corresponding to necessity for applying returnable transport system according to increasing the amount of trade between Northeast Asia's countries. The second is the development of certification project for safe transportation of packaging corresponding to costumer's needs for safe transit according to the growth of electronic commerce and the increase of global distribution.

• Archives of design research
• /
• v.17 no.3
• /
• pp.167-178
• /
• 2004

The purpose of this treatise is to show merits and method of establishing Lotte department store design division Online Documents Communication System through illustration of examples of intranet in which internet environment convenient to use for its openness is applied for establishing Design Online Documents Communication System for fundamentals of organization. In this connection merits and effect attainable from establishing Design Outline Documents Communication System of the enterprise as found were as follows: Firstly, it brought about reduction in workload of staffs through sharing various existing resources. It reduced redundant works and enables speedy handling of works. Secondly, it was possible to exchange viewpoints and share information by pertinent parties. Thirdly, by expediting information exchange and communication among persons in charge it was possible to improve work efficiency. Fourthly, it was possible to build and operate such system at relatively low cost on the basis of web browser. Without using any other significant instrument or equipment but by linking it to business network and using existing computer system operation was possible. Fifthly, by common sharing of work exclusive to design room through on-line it was possible to improve professionalism and convenience in data preservation. Through this treatise and survey and study on process for establishing intranet it was possible to find that there were sharing work, improving work efficiency, reducing workload, saving cost and expediting communication to a significant degree.

• KIPS Transactions on Software and Data Engineering
• /
• v.9 no.11
• /
• pp.357-366
• /
• 2020

As the proportion and complexity of software embedded in aircraft increase, risk factors such as mission failure, function failure and performance failure due to software errors also increase. In the mission-critical software systems such as aircraft software, managing requirement traceability is essential to maintain the software systems with minimal period and cost. However, the development company is not accurately complying with the guideline for managing requirement traceability due to various reasons such as development cost and schedule. Therefore, it is not easy to systematically establish and maintain requirement traceability. In the paper, we analyze actual test cases of aviation software systems from the viewpoint of requirements traceability in order to learn if there are failure cases of test cases due to the absence of systematic traceability management activities. We also check the risks associated with the failure cases according to the type and severity of the cases. As a result of analyzing a total of 7 aircraft-mounted software, failure cases could be divided into three types: omission of requirements, lack of connection between requirements and test procedures, and omission of test procedures. There were a total of 18 failure cases, 6 for each type. The numbers of high, middle and low risks were 1, 13 and 4, respectively, where the number of middle risks is largest.

• International Journal of Highway Engineering
• /
• v.12 no.3
• /
• pp.27-35
• /
• 2010

Asphalt Plug Joint(APJ) is an buried expansion joint that enabling the smooth connection of expansion gap and road pavement by filling the gap with bituminous mixture of 20% bitumen and 80% aggregate by weight, so it secures evenness and expansion or contraction using the material's properties. Although APJ is designed to have a 6-7 year lifecycle, there are some cases where it is damaged within the first six months. This early damage cause traffic congestion due to frequent repair works, and social cost exceeding the installation cost of the joint. So, in this research, we have developed a new system of Buried Folding Lattice Joint(BFLJ) which can overcome the disadvantages of APJ, and have analyzed and compared it's performance with the conventional APJ through experiment with specimens. As a result of the experiment, APJ had crack formation on both ends of the gap plate, spreading to the surface of the expansion joint. With this result, we can conclude that the reason for early damage is the tension failure due to the concentration of strain in the asphalt mixture along the end of gap plate and the debonding along the joint section. In contrast, the newly developed BFLJ induced even transformation in the joint by applying moving stud and high performance material, and resolved APJ's disadvantage of strain concentration. Therefore, it could be seen that the newly developed BFLJ could overcome the disadvantages of APJ and prevent early damage.

• Journal of Food Hygiene and Safety
• /
• v.34 no.5
• /
• pp.489-494
• /
• 2019

The appropriateness of introducing blockchain technology into food safety management systems was evaluated by conducting a survey of experts on the effectiveness and constraint evaluation indicators, and a portfolio analysis was conducted to set the priorities of blockchain application. The food safety management activities considered in this study were issuing documents on food import/export, food hygiene rating scheme, civil complaint management in the food sector, food- related certification, risk information management, and food traceability systems. The sectors that can be expected to be effective in the introduction of blockchain technology were food- related certification, food hygiene rating scheme, risk information management, and issuing documents on food import/export. In the case of food traceability systems and civil complaint management, the introduction of blockchain technology was not recommended due to ineffectiveness. From the evaluation of the constraints (e.g., technical limits, cost, legal amendment, personal information disclosure, timeliness, and ease of connection) to be overcome when introducing blockchain into food safety management, it was found that there are more than average constraints in all six areas. In particular, the food traceability system was evaluated to have the most constraints. Issuing documents on food import/export is very effective with the introduction of blockchain technology, but due to high cost and legal restrictions, it is necessary to improve the institutional system in order to introduce blockchain. Among the evaluation sectors, food- related certification, food hygiene rating scheme, and risk information management on foods were suitable for preferentially adopting blockchain technology since these areas might experience greatly improved reliability and transparency through the introduction of blockchain, with relatively low constraints.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.43-52
• /
• 2018

Livestock production is the second largest economic activity of Pakistan's rural population, more specifically; sixty-seven percent of Pakistan's total population that live in rural areas sources their income from livestock activities. As this subsector of agriculture within rural Pakistan is so critical to Pakistan's economy it is especially important to further develop the sector through the introduction of cost effective, efficient, and practical technologies. In an effort to improve such an important sector within the agriculture sector in Pakistan research has been carried out to better understand the capabilities and feasibility of leveraging Internet of Things based technologies, such as, microprocessors and microcontrollers within Pakistan's livestock production and management. The internet of Things can potentially allow for the scaling of small-scale rural livestock production to larger operations through cost effective and efficient livestock management through the application of IoT technologies. This paper discusses the architecture models of IoT based smart animal farms and delves into the pitfalls and advantages of applying IoT technologies in this sector. In this work we will explore the cheap sensors to monitor the internal activities of cattle farm with the aim of using these sensors as part of system to detect the important operations that need on the time response. This system should provide the feed and water as required, and control the temperature in sheds to protect the cattle being ill and on heat, and humidity level .internet connection used to connect these devices with smartphones or computers. In this paper we proposed the architecture model of IoT based smart animal farm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2006

Previous to do business computerization of industry field, it isn't efficient for write down all account book. Recently many companies competitive is raised from competence improvement for a task and cost-cutting for electronic data processing system. Moreover, sudden increase of internet-user need effective management information system and share information because of network connection. Accordingly, it needs to get out of text base information system from multimedia base system and it need to introduce E-catalog system of merchandise information. In addition, it is required technological development and merchandising with movement, real time omnipresent. carrying. In this paper, established portable B2B system with movement of precious metals and jewels field's portable terminal from mobile technology.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1872-1885
• /
• 2011

In recent years, due to the economic growth of the Northeast Asia, the trading relationship among the Asian countries becomes more active, and the mutual level of dependence is increasing. As the general market, the Northeast Asia pursue a function of market and economic activities among the Northeast Asia become more active consistently. It is important that Korea strengthened logistics network connection systems with China and Japan are improving the logistics facilities and expanding the transport network steadily. In order for Korea to improve as a logistics position, Korea needs to build various and efficient multimodal transport system and sets up a position as a major efficient logistics network center. Therefore, this paper intended to analyze transport cost and time of Korea-China-Japan logistics network and suggest a competitive multimodal transport with the maritime transport and new multimodal transport systems by comparing scenarios.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.4
• /
• pp.141-152
• /
• 2013

The current web implementation largely falls into process-oriented and object-oriented methods. Both ways implement the programs to be used for simple design of external outfit and auxiliary function of hybrid webs and it might lead to cost problems arising from waste of time and man-power to develop with it. Therefore, managed structural system programming which can be applied under .NET framework is suggested in a bid to solve these problems. The structural system design method under .NET environment by applying CS concept prefers to adopting the optimized design configuration suited to proper interfaces of UI configuration, which offers the environment to maintain the inheritance relationship by taking form of the balanced class allotment by domain, and continue to keep the connectivity between UX and UI which leads to application of interface of UX objects as form of objects through connection with objects in class design process. This development method enables programs to be implemented focused on representation methods of UI and UX, and helps relieve much of the burden on development costs.