• Journal of Korea Port Economic Association
• /
• v.37 no.1
• /
• pp.179-196
• /
• 2021

Port congestion rate at Busan Port has increased for three years. Port congestion causes container reconditioning, which increases the dockyard labor's work intensity and ship owner's waiting time. If congestion is prolonged, it can cause a drop in port service levels. Therefore, this study proposed an anomaly detection method using ARIMA(Autoregressive Integrated Moving Average) model with the daily volume data from 2013 to 2020. Most of the research that predicts port volume is mainly focusing on long-term forecasting. Furthermore, studies suggesting methods to utilize demand forecasting in terms of port operations are hard to find. Therefore, this study proposes a way to use daily demand forecasting for port anomaly detection to solve the congestion problem at Busan port.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.11
• /
• pp.3097-3107
• /
• 1999

Recently many studies have been done on the Random Early Detection(RED) algorithm as an active queue management and congestion avoidance scheme in the Internet. In this paper we first overview the characteristics of RED and the modified RED algorithms in order to understand the current status of these studies. Then we analyze the RED dynamics by investigating how RED parameters affect router queue behavior. We show the cases when RED fails since it cannot react to queue state changes aggressively due to the deterministic use of its parameters. Based on the RED parameter analysis, we propose a self-adaptive algorithm to cope with this RED weakness. In this algorithm we make two parameters be adjusted themselves depending on the queue states. One parameter is the maximum probability to drop or mark the packet at the congestion state. This parameter can be adjusted to react the long burst of traffic, consequently reducing the congestion disaster. The other parameter is the queue weight which is also adjusted aggressively in order for the average queue size to catch up with the current queue size when the queue moves from the congestion state to the stable state.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.9
• /
• pp.2323-2340
• /
• 2012

Recent advances in cognitive radio technology have drawn immense attention to higher layer protocols above medium access control, such as transmission control protocol (TCP). Most proposals to improve the TCP performance in cognitive radio (CR) networks have assumed that either all nodes are in CR networks or the TCP sender side is in CR links. In those proposals, lower layer information such as the CR link status could be easily exploited to adjust the congestion window and improve throughput. In this paper, we consider a TCP network in which the TCP sender is located remotely over the Internet while the TCP receiver is connected by a CR link. This topology is more realistic than the earlier proposals, but the lower layer information cannot be exploited. Under this assumption, we propose an enhanced TCP protocol for CR networks called TCP for cognitive radio (TCP-CR) to improve the existing TCP by (1) detection of primary user (PU) interference by a remote sender without support from lower layers, (2) delayed congestion control (DCC) based on PU detection when the retransmission timeout (RTO) expires, and (3) exploitation of two separate scales of the congestion window adapted for PU activity. Performance evaluation demonstrated that the proposed TCP-CR achieves up to 255% improvement of the end-to-end throughput. Furthermore, we verified that the proposed TCP does not deteriorate the fairness of existing TCP flows and does not cause congestions.

• Journal of Communications and Networks
• /
• v.6 no.2
• /
• pp.133-146
• /
• 2004

Recently, many active queue management (AQM) algorithms have been proposed to address the performance degradation. of end-to-end congestion control under tail-drop (TD) queue management at Internet routers. However, these AQM algorithms show performance improvement only for limited network environments, and are insensitive to dynamically changing network situations. In this paper, we propose an adaptive queue management algorithm, called PID-controller, that uses proportional-integral-derivative (PID) feedback control to remedy these weak-Dalles of existing AQM proposals. The PID-controller is able to detect and control congestion adaptively and proactively to dynamically changing network environments using incipient as well as current congestion indications. A simulation study over a wide range of IP traffic conditions shows that PID-controller outperforms other AQM algorithms such as Random Early Detection (RED) [3] and Proportional-Integral (PI) controller [9] in terms of queue length dynamics, packet loss rates, and link utilization.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.3
• /
• pp.177-183
• /
• 2007

Active queue management (AQM) refers to a family of packet dropping mechanisms for router queues that has been proposed to support end-to-end congestion control mechanisms in the Internet. The proposed AQM algorithm by the IETF is Random Early Detection (RED). The RED algorithm allows network operators simultaneously to achieve high throughput and low average delay. However. the resulting average queue length is quite sensitive to the level of congestion. In this paper, we propose the Refined Adaptive RED(RARED), as a solution for reducing the sensitivity to parameters that affect RED performance. Based on simulations, we observe that the RARED scheme improves overall performance of the network. In particular, the RARED scheme reduces packet drop rate and improves goodput.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.2
• /
• pp.321-327
• /
• 2023

With the development of artificial intelligence, the prediction system has become one of the essential technologies in our lives. Despite the growth of these technologies, traffic congestion at intersections in the 21st century has continued to be a problem. This paper proposes a system that predicts intersection traffic jams using a Convolutional LSTM (Conv-LSTM) algorithm. The proposed system models data obtained by learning traffic information by time zone at the intersection where traffic congestion occurs. Traffic congestion is predicted with traffic volume data recorded over time. Based on the predicted result, the intersection traffic signal is controlled and maintained at a constant traffic volume. Road congestion data was defined using VDS sensors, and each intersection was configured with a Conv-LSTM algorithm-based network system to facilitate traffic.

• International Journal of Highway Engineering
• /
• v.16 no.4
• /
• pp.127-134
• /
• 2014

PURPOSES : To operate more efficient traffic management system, it is utmost important to detect the change in congestion level on a freeway segment rapidly and reliably. This study aims to develop classification method of congestion change type. METHODS: This research proposes two classification methods to capture the change of the congestion level on freeway segments using the dedicated short range communication (DSRC) data and the vehicle detection system (VDS) data. For developing the classification methods, the decision tree models were employed in which the independent variable is the change in congestion level and the covariates are the DSRC and VDS data collected from the freeway segments in Korea. RESULTS : The comparison results show that the decision tree model with DSRC data are better than the decision tree model with VDS data. Specifically, the decision tree model using DSRC data with better fits show approximately 95% accuracies. CONCLUSIONS : It is expected that the congestion change type classified using the decision tree models could play an important role in future freeway traffic management strategy.

• The KIPS Transactions:PartC
• /
• v.16C no.2
• /
• pp.237-244
• /
• 2009

The congestion in wireless sensor network increases the ratio of data loss and causes the delay of data. The existing congestion protocols for wireless sensor network reduces the amount of transmission by control the sampling frequency of the sensor nodes related to the congestion when the congestion has occurred and was detected. However, the control method of sampling frequency is not applicable on the situation which is sensitive to the temporal data loss. In the paper, we propose a new congestion control, ACT - Adaptive Congestion conTrol. The ACT monitors the network traffic with the queue usage and detects the congestion based on the multi level threshold of queue usage. Given network congestion, the ACT increases the efficiency of network by adaptive flow control method which adjusts the frequency of packet transmission and guarantees the fairness of packet transmission between nodes. Furthermore, ACT increases the quality of data by using the variable compression method. Through experiment, we show that ACT increases the network efficiency and guarantees the fairness to sensor nodes compared with existing method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.6
• /
• pp.2483-2503
• /
• 2016

Traffic congestion is a severe problem in many modern cities around the world. Real-time and accurate traffic congestion identification can provide the advanced traffic management systems with a reliable basis to take measurements. The most used data sources for traffic congestion are loop detector, GPS data, and video surveillance. Video based traffic monitoring systems have gained much attention due to their enormous advantages, such as low cost, flexibility to redesign the system and providing a rich information source for human understanding. In general, most existing video based systems for monitoring road traffic rely on stationary cameras and multiple vehicle tracking method. However, most commonly used multiple vehicle tracking methods are lack of effective track initiation schemes. Based on the motion of the vehicle usually obeys constant velocity model, a novel vehicle recognition method is proposed. The state of recognized vehicle is sent to the GM-PHD filter as birth target. In this way, we relieve the insensitive of GM-PHD filter for new entering vehicle. Combining with the advanced vehicle detection and data association techniques, this multiple vehicle tracking method is used to identify traffic congestion. It can be implemented in real-time with high accuracy and robustness. The advantages of our proposed method are validated on four real traffic data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11B
• /
• pp.1225-1233
• /
• 2009

ISPs and Enterprises are equipping their networks with sufficiently high speed facilities and provide large bandwidths members. However the high speed enterprise network does not have satisfying end-to-end network performance within the network in spite of under utilization. The root cause of this performance degradation is a micro-congestion, which is a short-live event of traffic congestion. A micro-congestion causes packet loss, delay and packet reodering, and finally results in end-to-end network performance degradation. In this paper, we propose a micro-congestion detection method and find out the characteristics of performance degradation by analyzing traffic archives which is collected from a network link when a micro-congestion occurs.