• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.261-264
• /
• 2008

횡방향으로 구속된 콘크리트의 응력-변형률 거동은 구속되지 않은 콘크리트와는 다른 거동을 한다. 보통강도 콘크리트에서 구속효과를 고려한 콘크리트 재료모델로는 Mander 모델이 대표적이며 고강도 콘크리트의 구속효과의 경우 여러 연구자들에 의하여 제안된 모델 중 공시체 수준의 실험결과와 잘 일치하는 Sakino-Sun 모델을 사용하였다. 보통강도에서는 Mander모델을 고강도 콘크리트에서는 Sakino-Sun 모델을 사용하였으나 중간 강도인 30-40MPa의 강도에서 Mander 모델과 Sakino-Sun 모델의 적용시 실험결과와 해석결과가 다소 차이를 보이며 또한 두 모델은 적용할 수 있는 최대 또는 최소 콘크리트 압축강도의 한계범위가 명확하지 않다. 따라서 이 연구에서는 30-40MPa의 강도의 횡방향으로 구속된 콘크리트의 비선형 재료모델을 제안하였다.

• Structural Engineering and Mechanics
• /
• 제22권5호
• /
• pp.541-562
• /
• 2006

This paper compares the performance of axially loaded concrete filled steel tube (CFST) columns cast using a conventionally vibrated normal concrete (NC) and a novel self-consolidating concrete (SCC) made with a new viscosity modifying admixture (VMA). A total of sixteen columns with a standard compressive strength of about 50 MPa for both SCC and NC were tested by applying concentric axial load through the concrete core. Columns were fabricated without and with longitudinal and hoop reinforcement (Series I and Series II, respectively) in addition to the tube confinement. The slenderness of the columns expressed as height to diameter ratio (H/D) ranged between 4.8 and 9.5 for Series CI and between 3.1 and 6.5 for Series CII. The strength and ductility of SCC columns were found comparable to those of their NC counterparts as the maximum strength enhancement in NC columns ranged between 1.1% and 7.5% only. No significant difference in strain development was found due to the presence of SCC or NC or due to the presence of longitudinal and hoop reinforcement. Biaxial stress development in the steel tube as per von Mises yield criterion showed similar characteristics for both SCC and NC columns. The confined strength ($f^{\prime}_{cc}$) of SCC was found to be lower than that of NC and $f^{\prime}_{cc}$ also decreased with the increase of slenderness of the columns. Analytical models for the prediction of confined concrete strength and axial strength of CFST columns were developed and their performance was validated through test results. The proposed models were found to predict the axial strength of CFST columns better than existing models and Code based design procedures.

• 한국추진공학회지
• /
• 제9권2호
• /
• pp.97-104
• /
• 2005

많은 장점에도 불구하고 유동함수를 이용한 수치해석용 격자생성 좌표변환기법의 단점은 저속영역에서의 격자간격이 고속영역에 비해 상대적으로 큼에 따라 수치적 처리에 많은 오차를 내포하고 있다는 점이다. 본 연구에서는 이러한 저속영역에서의 단점을 보완하기 위하여 격자간격을 속도크기 및 영역에 따라 적절히 조절할 수 있도록 수학적으로 변형된 압축성 유동함수를 이용한 좌표변환기법을 제안하고 가스터빈엔진에 주로 적용되는 유동모델로서 동심원상 두개 이상의 난류제트혼합유동에 대해 적용하였으며 해당 실험치, 즉 축 방향 평균속도분포, 난류운동에너지, 그리고 난류전단응력분포와 비교하여 난류운동에너지가 약간 과소평가 된 대칭축을 제외한 혼합경계층 내에서 $3.5\%$ 이내의 신뢰성을 확보하였다. 본 기법은 특히 터보팬엔진에 대한 내부흐름들의 혼합유동을 규명하거나 또는 난류전단응력에 의한 제트소음발생 및 저감방법을 도모하는데 유용하게 활용될 것으로 기대된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.201-204
• /
• 2008

FRP 합성재료로 구속된 콘크리트의 응력-변형률 응답을 합리적으로 예측할 수 있는 해석모델이 제시되었다. 제안된 모델은 하중이 증가함에 따라 점진적으로 발생하는 미세균열에 의한 부피팽창이 미세재료구조의 손상을 나타내는 중요한 척도이며, 이에 손상정도에 따라 하중지지능력을 일관되게 산정할 수 있다는 기본개념에 근거한다. 이를 위하여 제안모델은 면적변형률 및 공극의 함수로 표시된 탄성계수, 팽창콘크리트와 구속매체의 상호작용을 나타내는 에너지 평형식, 변화하는 구속력 및 점증계산논리를 포함한다. 따라서 실험으로부터 유도된 팽창비 관계식으로부터 횡방향 혹은 부피팽창변형률을 산정하는 기존의 해석모델과는 달리 역학적 거동 및 에너지 평형식으로부터 연속적으로 변화하는 횡방향 변형률을 산정한다.

• Steel and Composite Structures
• /
• 제22권1호
• /
• pp.45-61
• /
• 2016

The domestic and foreign scholars conducted many studies on mechanical properties of wave web steel beam and high-strength spiral stirrups confined concrete columns. Based on the previous research work, studies were conducted on the anti-seismic property of the end plate bolt connected wave web steel beam and high-strength spiral stirrups confined concrete column nodes applied with pre-tightening force. Four full-size node test models in two groups were designed for low-cycle repeated loading quasi-static test. Through observation of the stress, distortion, failure process and failure mode of node models, analysis was made on its load-carrying capacity, deformation performance and energy dissipation capacity, and the reliability of the new node was verified. The results showed that: under action of the beam-end stiffener, the plastic hinges on the end of wave web steel beam are displaced outward and played its role of energy dissipation capacity. The study results provided reliable theoretical basis for the engineering application of the new types of nodes.

• Steel and Composite Structures
• /
• 제23권2호
• /
• pp.229-238
• /
• 2017

This paper presents a combined numerical and theoretical study on the composite action between steel and concrete of circular steel tube confined concrete (STCC) stub columns under axial compressive loading with a full theoretical elasto-plastic model and finite element (FE) model in comparison with experimental results. Based on continuum mechanics, the elasto-plastic model for STCC stub columns was established and the analysis was realized by a FORTRAN program and the three dimensional FE model was developed using ABAQUS. The steel ratio of the circular STCC columns were defined in range of 0.5% to 2% to analyze the composite action between steel tube and concrete, and make a further study on the advantages of the circular STCC columns. By comparing the results using the elasto-plastic methods with the parametric analysis result of FE model, the appropriate friction coefficient between the steel tube and core concrete was defined as 0.4 to 0.6. Based on ultimate balance theory, the formula of ultimate load capacity applying to the circular STCC stub columns was developed.

• 한국구조물진단유지관리공학회 논문집
• /
• 제11권3호
• /
• pp.143-150
• /
• 2007

본 연구에서는 카본시트튜브로 구속된 원형기둥에 반복 횡하중을 가하여 기둥의 휨내력을 평가하는 실험을 수행하였다. 중립축을 기준으로 압축 및 인장측 단면의 모멘트를 이용하여 공칭모멘트를 계산하는 등가응력블록계산법을 소개하였다. 또한 실험결과를 분석하여 횡 하중에 대한 거동을 예측할 수 있는 회귀식을 마련하여 실험결과와 비교하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.605-610
• /
• 2002

The purpose of this study is to develop an analytic model which can describe the behavior or concrete compressive member strengthened by CFS(Carbon Fiber Sheet) with various cross-sectional shapes such as circular. square, and octagonal and various laminate angles. The failure criterion of laminated CFS is based on Tsai-Wu failure criterion. The stress strain model of confined concrete compressive member is based on an equation proposed by Mander. The effective lateral confining pressure is considered and modified according to various cross-sectional shapes. Octagonal cross-section shows the best results in the aspect of ductility, while circular does in compressive strengthening effects. In addition, [0/0/0/0] laminate in which the direction of fiber is parallel to the direction of principal stress shows the superior strength and ductility than other laminates. The analytic results show that strength and ductility of the analytic model depend on the cross-sectional shapes as well as the laminate angles.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 봄 학술발표회 논문집
• /
• pp.471-478
• /
• 2004

The behavior of stocky concrete-filled glass fiber reinforced polymer(GFRP) tubes was studied experimentally and analytically The behavior is focused on the confining action of GRFP tube against concrete. In the experimental work, extensive tensile tests for GFRP tubes which have various fiber lay-out were conducted. And, also short length concrete filled GFRP tubes which have various tube thickness, diameter, and length were tested. In the analytical work, equations to describe the compressive stresses and strains at failure, as well as the entire stress-strain curve of the GFRP tubes were developed. A comparison between the experimental results and those of analytical results indicate that the proposed model provides satisfactory predictions for the compressive strengths, strains at failure, and stress-strain responses.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.853-858
• /
• 2001

Experimental studies were peformed to investigate variations in ductility of shear wall with length of boundary confinement. Eight specimens containg different lengths of confinment zone, which model compressive zone in plastic regions of shear walls, were tested against eccentric vetical load. Stress-strain model for confined concrete was used to predict strength and ductility of the specimens, which was compared to the test results. The results obtained show that failure of the compressive zone occurs in a brittle manner when the stress of unconfined zone softened after the ultimate strength were reached. To enhance the ductility of shear walls with concentrated confinement zone such as barbell-type walls, the ultimate strength of the confinement zone needs to be increased, and for shear walls with distributed confinement zone the length of the confinement zone needs to be extended.