• Journal of the Korean Society of Costume
• /
• v.60 no.4
• /
• pp.58-75
• /
• 2010

The purpose of this study is to investigate the characteristics of fur and leather clothes of minority races of China in Northeas and Inner Mongolia. To examine their characteristics, the clothes and ornaments were classified into four types: headwear, clothes, footwear, and accessories. First, headwear was divided into animal head-shaped, petal-shaped, round-shaped, and cone-shaped head wear. Among them, the animal head-shaped headwear was made by making the best use of the shape of animal's head and it was used as the best disguising method when hunting. Second, clothes were composed of upper garments and lower garments. For the upper garments, Po and Jeogori were worn and pants were worn for the lower garments. The clothes were decorated with lining, applique, or top-stitching on the outer collar, neck circumference, and the edge of sleeves and pants. Third, for the footwear, high boots of leather were developed to meet the needs for a convenient life in the plains. In some areas, fur shoes and leather shoes were also used. Finally, accessories included bags and gloves. Bags were usually decorated with fur on the outside or with a fringe or applique of tanned leather. Gloves were lavishly decorated with embroideries and partly with fur or leather.

• KCID journal
• /
• v.2 no.1
• /
• pp.57-64
• /
• 1995

현장 투수시험 방법 중에서 Borehole type의 Boutwell Permeameter와 Constant head bore-hole permeameter, 그리고 Porous probe type의 cone shaped porous probe(BAT Permeameter)에 대한 내용을 간단히 소개하였고, 각 측정법의 특징을 비교분석한 내용을 요약하면 (표-1)과 같으며, 기회가 있으면 Infiltrometer type와 Underdrain type에

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.7
• /
• pp.537-548
• /
• 2014

In this paper, horn loudspeaker modeling was suggested, investigated and verified through comparison of test results and simulation ones based on input electrical impedance curves and acoustic sensitivity ones. First, Thiele Small parameters of horn driver were identified by using pseudo loudspeaker model concept and verified in case of both closed and open horndriver. Second, cone-shaped horn models were investigated and compared with input acoustic impedance curves for real horn(cone angle $6.6^{\circ}$) and short horn(cone angle $27.9^{\circ}$). It showed that Leach model for cone horn was well described to test results, which were electrical impedance and acoustic sensitivity, compared to Lemaitre one. To represent horn system model good approximation in wide frequency range, mass correction filter and lowpass filter were adopted and consequently showed good fitted to test results.

• Parasites, Hosts and Diseases
• /
• v.60 no.6
• /
• pp.419-421
• /
• 2022

To improve our understanding of the migration of sparganum in humans, we report a case of ocular sparganosis having the migratory episode from the muscle cone to the subconjunctiva. A 34-year-old woman was admitted to the Hospital of Anhui Medical University (Hefei, China), in December 2019. She presented with conjunctival hemorrhage and recurrent pain in the left eye. A foreign body was found in the muscle cone of the eye. Two months later, a ribbon-like white material was found under the conjunctiva on slit-lamp examination. A long and slender, actively moving parasite was extracted by surgery. The extracted worm was approximately 8 cm long and 2 mm wide. The worm was whitish, wrinkled, ribbon shaped, and had a slightly enlarged scolex. The worm sample was morphologically identified as a plerocercoid larva (sparganum) of the Spirometra tapeworm. Her conjunctival blood suffusion and eye pain ceased within 1 week after operation. She has been in good health without any symptoms during the 2-year follow-up. A case of ocular sparganosis, in which larval worm migrated from the muscle cone to the subconjunctiva is reported from China.

• Korean Journal of Plant Resources
• /
• v.25 no.4
• /
• pp.401-406
• /
• 2012

This study was conducted to investigate the effect of cone protective net and the variation of cone and seed characteristics of a unique and rare dwarf stone pine (Pinus pumila Regel) population in Mt. Seorak which is in the southern peripheral of South Korea. Iron protective net (50 mesh, 25 ${\times}$ 25 cm) was effective in reducing birds and rodents damage to conelet, thereby it was possible to safely collect seed genetic resources. Early July was observed to be the most appropriate season to cover conelet with Iron protective net. P. pumila have ovoid-triangle shaped, wingless seeds and indehiscent cones, seeds dissemination is mainly by the hoarding behavior of nutcrackers and rodents. Statistical analysis showed that there were significant differences among individuals within population, and the mean characteristics of the species were 35.3 mm, 25.6 mm, 1.38, 6.6 g and 39.3 ea in the cone length, cone width, cone index, cone weight and in number of seeds per cone, respectively. Coefficients of variations in seed weight and number of seeds per cone were relatively high (21.7%, 21.5%, respectively) compared to other traits. Based on the correlation analysis between cone characteristics and seed characteristics, the length of cone and seed showed a significant positive correlation with the seed size and the seed weight, but the width and thickness of seed showed a negative correlation with the number of seeds per cone.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.2
• /
• pp.177-181
• /
• 2004

A PVC membrane electrode for silver ion based on a new cone shaped calix[4]arene (CASCA) as membrane carrier was prepared. The electrode exhibits a Nernstian response for $Ag^+$ over a wide concentration range ($1.0{\times}10^{-1}-8.0{\times}10^{-6}$M) with a slope of 58.2 {\pm}$ 0.5 mV per decade. The limit of detection of the sensor is $5.0{\times}10^{-6}$M. The sensor has a very fast response time (~5 s) in the concentration range of ${\leq}=1.0{\times}10^{-3}$ M, and a useful working pH range of 4.0-9.5. The proposed sensor displays excellent discriminating ability toward $Ag^+$ ion with respect to common alkali, alkaline earth, transition and heavy metal ions. It was used as an indicator electrode in potentiometric titration of $Ag^+$ with EDTA and in direct determination of silver ion in wastewater of silver electroplating.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.600-605
• /
• 2012

In this paper, the acoustic performance of a shipboard large-sized room unit is studied. The room unit is a kind of rectangular absorptive chamber with a partition whose surface absorptive material with fabric skin is attached to. The room unit has one inlet and three outlet. At the inlet, a plane damper is installed to control the flow rate. The acoustic performance of a prototype room unit is measured using a HVAC mock-up. It is shown that its insertion loss is comparable with that of a commercially-used room unit but the developed room unit generates flow noise higher than the other one. The major source of flow noise is analyzed by NADS-R, the noise analysis program for room unit. Cone-shaped dampers are proposed to be used as the damper of a room unit to reduce flow noise. It is shown that the cone-shaped damper decrease flow noise remarkably.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.5
• /
• pp.468-473
• /
• 2012

In this paper, the acoustic performance of a shipboard large-sized room unit is studied. The room unit is a kind of rectangular absorptive chamber with a partition whose surface absorptive material with fabric skin is attached to. The room unit has one inlet and three outlets. At the inlet, a plane damper is installed to control the flow rate. The acoustic performance of a prototype room unit is measured using a HVAC mock-up. It is shown that its insertion loss is comparable with that of a commercially-used room unit but the developed room unit generates flow noise higher than the other one. The major source of flow noise is analyzed by NADS-R, the noise analysis program for room unit. Cone-shaped dampers are proposed to be used as the damper of a room unit to reduce flow noise. It is shown that the cone-shaped damper decrease flow noise remarkably.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.5
• /
• pp.638-644
• /
• 2016

In this research, theoretical study on empirical analysis method to estimate waterdrop's deformation by shock wave is presented. Flow field is calculated using theoretical and empirical relations. Waterdrop's deformation including movement, size, mass, and orientation is modeled using empirical relations derived from existing experimental data. Developed method is applied to specific flight examples with arbitrary flight speed and vehicle's configuration. The flight speed is assumed to Mach number of 2 and 4. The diameter of waterdrop is varied from 1 to 5 mm. Waterdrops along the stagnation line in front of hemispherical nose with the radius of 50 mm and around a cone-shaped side wall with the half angle of 20 degree are considered. It is found that the maximum diameter of the waterdrop is increased up to 2.77 times the initial diameter. The mass is conserved more than 66.7 %. In the case of a cone-shaped side wall, waterdrop's orientation angles defined from the flight direction when the Mach number is 2 and 4 are calculated as 33.0 and 25.6 degree, respectively.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1250-1253
• /
• 1994

(100), (110) and (111) Si wafers are etched by isotropic etching method, anisotropic etching method using KOH etchant and EPW etchant and combined two-step etching method to compare the results. Isotopic etching method is effective in fabrication of wedge-shaped tips, especially (110) Si. Anisotropic etching method of (100) Si using EPW etchant can fabricate sharp cone-shaped tips and isotropic etching after anisotropic etching of (100) Si can fabricate wedge-shaped tips.